Shared Projects

Shared Projects

4CHAMP Rev B

author: jdc_idlab
Top
Bottom

4 layer board of 1.65 x 1.65 inches (41.8 x 41.8 mm)
Uploaded: October 17, 2018
Shared: November 20, 2018
Total Price: $27.00

4ChAmp Board - DC coupled Amplifier board: THS3202 Amplifier board -3dB Bandwidth : 578MHz

4ChAmp Board - DC coupled Amplifier board: THS3202 Amplifier board -3dB Bandwidth : 578MHz

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Prototype Rev 2 Power Supply for 5850 FAO control circuit

author: Altronic-Research-Inc
Top
Bottom

2 layer board of 3.43 x 2.68 inches (87.1 x 68.0 mm)
Uploaded: November 20, 2018
Shared: November 20, 2018
Total Price: $45.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PTH

author: Greg-S-Jolley
Top
Bottom

2 layer board of 1.30 x 0.40 inches (33.1 x 10.1 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $2.55

LPS25H and Si7031 sensor board

LPS25H and Si7031 sensor board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MI Hall Sample Mount v1

author: lenferink
Top
Bottom

2 layer board of 0.91 x 0.60 inches (23.1 x 15.1 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $2.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy AV

author: Gopher
Top
Bottom

2 layer board of 5.46 x 2.06 inches (138.6 x 52.2 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $56.05

Teensy 3.5/3.6 capable PCB with Touchscreen, Audio Board socket, and three rotary encoders

https://github.com/compeoree/TeensyAV

Teensy 3.5/3.6 capable PCB with Touchscreen, Audio Board socket, and three rotary encoders

https://github.com/compeoree/TeensyAV

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Saleae_USB_interrogator.kicad_pcb

author: N.Boers
Top
Bottom

2 layer board of 1.57 x 0.60 inches (39.8 x 15.2 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $4.65

Adaptor board for a tidy connection of a Saleae Logic analyzer to USB A's. P1 is SMD USB A plug. P2 is through hole USB A receptacle. P3 is straight pin headers. P4 is right angle header sockets. LED D1 and R1 are for 5v power indication.

Adaptor board for a tidy connection of a Saleae Logic analyzer to USB A's. P1 is SMD USB A plug. P2 is through hole USB A receptacle. P3 is straight pin headers. P4 is right angle header sockets. LED D1 and R1 are for 5v power indication.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB LED stip driver V0.2

author: PlatinumFusion
Top
Bottom

2 layer board of 1.76 x 1.18 inches (44.7 x 30.0 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $10.35

To Drive a 12V LED strip from an Arduino/MCU

This Board has NOT been tested

To Drive a 12V LED strip from an Arduino/MCU

This Board has NOT been tested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_pmod_to_hdmi_24color_ddr_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 1.56 x 1.43 inches (39.6 x 36.4 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $11.10

dual-PMOD to 24bit DVI color using TFP410 PHY from TI.

dual-PMOD to 24bit DVI color using TFP410 PHY from TI.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CDI Rgb Expansion

author: FrankStrasser
Top
Bottom

2 layer board of 1.52 x 1.15 inches (38.7 x 29.1 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $8.70

Just a simple board to wire rgb from the encoder(of models of cdi consoles with the cxa1145 encoder)to your choice of connector(preferably an 8 pin mini din). To be used with a pass through scart cable with no components inside. The positive side of all the caps should be facing the resistors, th…

Show full description

Just a simple board to wire rgb from the encoder(of models of cdi consoles with the cxa1145 encoder)to your choice of connector(preferably an 8 pin mini din). To be used with a pass through scart cable with no components inside. The positive side of all the caps should be facing the resistors, th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AY_PCB - CADCAM.ZIP

author: noid
Top
Bottom

2 layer board of 1.56 x 1.97 inches (39.6 x 50.0 mm)
Uploaded: September 01, 2016
Shared: November 18, 2018
Total Price: $15.30

AY-3-8910 emulator on STM32

AY-3-8910 emulator on STM32

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

debuzz

author: autotelic
Top
Bottom

2 layer board of 1.30 x 0.80 inches (33.0 x 20.4 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $5.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flow Driver (Version 2)

author: cera-tops
Top
Bottom

2 layer board of 3.32 x 2.09 inches (84.2 x 53.1 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $34.60

A stepper motor controller for use with continuous flow 3D Printing.

More information at http://openprojects.bryancera.com

A stepper motor controller for use with continuous flow 3D Printing.

More information at http://openprojects.bryancera.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CheapBus Breakout Board

author: ab0tj
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.2 x 100.2 mm)
Uploaded: November 17, 2018
Shared: November 17, 2018
Total Price: $77.70

Breakout board for CheapBus, with built in logic probe. Headers and spacing are compatible with Tek P6417/6418 logic analyzer probes

Breakout board for CheapBus, with built in logic probe. Headers and spacing are compatible with Tek P6417/6418 logic analyzer probes

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi85

author: ab0tj
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.2 x 100.2 mm)
Uploaded: November 17, 2017
Shared: November 17, 2018
Total Price: $77.70

8085 system using RasPi Zero as I/O

8085 system using RasPi Zero as I/O

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino-Pro-Mini

author: Jetty
Top
Bottom

2 layer board of 0.73 x 1.33 inches (18.5 x 33.8 mm)
Uploaded: November 17, 2018
Shared: November 17, 2018
Total Price: $4.80

Sparkfun Arduino Pro 328 Mini - Students

Sparkfun Arduino Pro 328 Mini - Students

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nesrgb nocutmod easy solder board

author: FrankStrasser
Top
Bottom

2 layer board of 0.81 x 0.82 inches (20.6 x 20.9 mm)
Uploaded: September 12, 2018
Shared: November 17, 2018
Total Price: $3.30

A companion board for Tim Worthingtons nesrgb mod. This board is made to be soldered on top of an 8 pin mini din pcb mount connector which is soldered into the rf slot of an Nes frontloader for an easy no cut plastic rgb mod. Cover bottom except mounting holes and pins. Use an md 80sm mini din fr…

Show full description

A companion board for Tim Worthingtons nesrgb mod. This board is made to be soldered on top of an 8 pin mini din pcb mount connector which is soldered into the rf slot of an Nes frontloader for an easy no cut plastic rgb mod. Cover bottom except mounting holes and pins. Use an md 80sm mini din fr…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CDI Expansion Ver 2

author: FrankStrasser
Top
Bottom

2 layer board of 1.90 x 0.85 inches (48.2 x 21.6 mm)
Uploaded: October 15, 2018
Shared: November 17, 2018
Total Price: $8.05

Same components used as my other cdi board just incorporates an 8 pin mini din. Made to be soldered into the rf space of a cdi 220 console. First, desolder the rf box. Then solder on components and din to the pcb, then flush cut and tape bottom. Then solder capacitor or resistor legs from bottom …

Show full description

Same components used as my other cdi board just incorporates an 8 pin mini din. Made to be soldered into the rf space of a cdi 220 console. First, desolder the rf box. Then solder on components and din to the pcb, then flush cut and tape bottom. Then solder capacitor or resistor legs from bottom …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EmyRelPCB_1

author: keithl.online
Top
Bottom

2 layer board of 4.74 x 2.22 inches (120.3 x 56.5 mm)
Uploaded: November 16, 2018
Shared: November 17, 2018
Total Price: $52.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FFC to SATA

author: jskyboo
Top
Bottom

2 layer board of 0.78 x 0.72 inches (19.8 x 18.3 mm)
Uploaded: October 22, 2018
Shared: November 17, 2018
Total Price: $2.80

BOM:

  • J1: 200529-0080
  • J2: 5607-4200-SH

BOM:

  • J1: 200529-0080
  • J2: 5607-4200-SH
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FFC to ESATA

author: jskyboo
Top
Bottom

2 layer board of 0.74 x 0.44 inches (18.7 x 11.2 mm)
Uploaded: November 09, 2018
Shared: November 17, 2018
Total Price: $1.60

BOM:

  • J1: 200529-0080
  • J2: G091131300LF

Used with: https://oshpark.com/shared_projects/fhvrxwMw

BOM:

  • J1: 200529-0080
  • J2: G091131300LF

Used with: https://oshpark.com/shared_projects/fhvrxwMw

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy