2 layer board of 2.11 x 1.45 inches (53.7 x 36.9 mm)
Uploaded:
January 21st 2019
Shared:
March 13th 2019
Total Price:
$15.35
A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.
…
A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.
Based on the schematics found here: http://www.webalice.it/cicciopetito/
An example of the 47k resistor array used is this 4611X-1LF-47K from Mouser but any SIL-11 47k array should do. Switch for the turbo should be whatever SP3T or DP3T you can find.
A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.
…
A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.
Based on the schematics found here: http://www.webalice.it/cicciopetito/
An example of the 47k resistor array used is this 4611X-1LF-47K from Mouser but any SIL-11 47k array should do. Switch for the turbo should be whatever SP3T or DP3T you can find.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
