Shared Projects

Shared Projects

MIL-STD-1553 analog front end

author: sjm
Top
Bottom

2 layer board of 1.60 x 0.44 inches (40.6 x 11.1 mm)
Uploaded: September 16, 2019
Shared: September 16, 2019
Total Price: $3.50

Analog front end for MIL-STD-1553 bus monitor. Converts 1-30Vpp into 3.3V digital.

Analog front end for MIL-STD-1553 bus monitor. Converts 1-30Vpp into 3.3V digital.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi Flash Hat v0.1

author: nsayer
Top
Bottom

2 layer board of 1.35 x 0.83 inches (34.3 x 21.0 mm)
Uploaded: August 17, 2019
Shared: September 15, 2019
Total Price: $5.55

This is a convenient way to break out the SPI device on a Raspberry Pi. The 2x3 header has the same pinout as the AVR ISP, with the !RESET line replaced with !CS. In fact, you probably could use this to perform AVR ISP programming at 3.3v.

The SOT23-3 is an AP2331 that protects the Pi's 3.3v b…

Show full description

This is a convenient way to break out the SPI device on a Raspberry Pi. The 2x3 header has the same pinout as the AVR ISP, with the !RESET line replaced with !CS. In fact, you probably could use this to perform AVR ISP programming at 3.3v.

The SOT23-3 is an AP2331 that protects the Pi's 3.3v b…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Encoder-boost

author: mcop
Top
Bottom

2 layer board of 0.66 x 0.68 inches (16.7 x 17.3 mm)
Uploaded: July 11, 2019
Shared: September 15, 2019
Total Price: $2.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TinyPICO FeatherWing

author: swooby
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.8 x 22.9 mm)
Uploaded: September 15, 2019
Shared: September 15, 2019
Total Price: $9.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ping controlV1

author: jonwilhelmjr
Top
Bottom

2 layer board of 3.05 x 1.41 inches (77.5 x 35.9 mm)
Uploaded: March 03, 2014
Shared: September 14, 2019
Total Price: $21.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adapter boardV1

author: jonwilhelmjr
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: July 19, 2018
Shared: September 14, 2019
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Phantom Power Audio Piezo Amplifier

author: charlesStaffeld
Top
Bottom

2 layer board of 0.38 x 0.68 inches (9.7 x 17.3 mm)
Uploaded: August 09, 2019
Shared: September 14, 2019
Total Price: $1.30

https://sagittronics.wordpress.com for BOM and other information. It's a variant of a circuit that the internet has named the "alex rice peizo amplifier". Uses SMT Toshiba Audio JFETS

https://sagittronics.wordpress.com for BOM and other information. It's a variant of a circuit that the internet has named the "alex rice peizo amplifier". Uses SMT Toshiba Audio JFETS

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Mixer Board 1 (Rev A)

author: dcity-org
Top
Bottom

2 layer board of 3.81 x 1.61 inches (96.7 x 40.8 mm)
Uploaded: July 12, 2019
Shared: September 14, 2019
Total Price: $30.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Test Board 1 (Rev A)

author: dcity-org
Top
Bottom

2 layer board of 0.81 x 0.41 inches (20.6 x 10.4 mm)
Uploaded: February 11, 2019
Shared: September 14, 2019
Total Price: $1.65

RF Test Board with SMA connectors

RF Test Board with SMA connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Low Pass Filter 1 (Rev B)

author: dcity-org
Top
Bottom

2 layer board of 2.81 x 0.81 inches (71.4 x 20.6 mm)
Uploaded: September 14, 2019
Shared: September 14, 2019
Total Price: $11.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Band Pass Filter 2 (Rev A)

author: dcity-org
Top
Bottom

2 layer board of 3.41 x 0.81 inches (86.6 x 20.6 mm)
Uploaded: September 14, 2019
Shared: September 14, 2019
Total Price: $13.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Band Pass Filter 1 (Rev B)

author: dcity-org
Top
Bottom

2 layer board of 2.01 x 0.81 inches (51.0 x 20.6 mm)
Uploaded: September 14, 2019
Shared: September 14, 2019
Total Price: $8.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

phx1.2

author: madsci
Top
Bottom

4 layer board of 2.70 x 0.58 inches (68.6 x 14.7 mm)
Uploaded: July 02, 2019
Shared: September 13, 2019
Total Price: $15.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dd_pcb

author: JohnGalt
Top
Bottom

2 layer board of 3.75 x 2.25 inches (95.4 x 57.2 mm)
Uploaded: September 04, 2019
Shared: September 13, 2019
Total Price: $42.30

Domesday Duplicator board as cloned from https://github.com/simoninns/DomesdayDuplicator/tree/master/KiCAD/Domesday%20Duplicator/Gerber on 03SEP2019 22:20 US pacific time (plus or minus a few minutes.)

Domesday Duplicator board as cloned from https://github.com/simoninns/DomesdayDuplicator/tree/master/KiCAD/Domesday%20Duplicator/Gerber on 03SEP2019 22:20 US pacific time (plus or minus a few minutes.)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sliderV3.3

author: RVProject
Top
Bottom

2 layer board of 1.24 x 1.65 inches (31.4 x 41.9 mm)
Uploaded: August 10, 2019
Shared: September 13, 2019
Total Price: $10.20

Control board for the RV-Project.Com Super Dimmer. Visit www.rv-project.com/projects/moad2.php for construction details.

Control board for the RV-Project.Com Super Dimmer. Visit www.rv-project.com/projects/moad2.php for construction details.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

adapter-cast

author: FPGA-Computer
Top
Bottom

2 layer board of 0.48 x 0.40 inches (12.1 x 10.2 mm)
Uploaded: September 13, 2019
Shared: September 13, 2019
Total Price: $0.95

https://github.com/FPGA-Computer/USB-Voltage-Current-Meter This is for 0.8mm PCB. STM8 adapter for soic18 chip in meter.

https://github.com/FPGA-Computer/USB-Voltage-Current-Meter This is for 0.8mm PCB. STM8 adapter for soic18 chip in meter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Torapu_SNES filter amp

author: Buttersoft
Top
Bottom

2 layer board of 1.34 x 1.04 inches (33.9 x 26.3 mm)
Uploaded: September 13, 2019
Shared: September 13, 2019
Total Price: $6.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PSDBV2

author: KWZACK_APL
Top
Bottom

2 layer board of 0.41 x 0.41 inches (10.4 x 10.4 mm)
Uploaded: September 12, 2019
Shared: September 12, 2019
Total Price: $0.80

Pressures Sensor Daugtherboard

Pressures Sensor Daugtherboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

skbowie2

author: TheScott
Top
Bottom

2 layer board of 3.73 x 0.73 inches (94.8 x 18.6 mm)
Uploaded: September 09, 2019
Shared: September 12, 2019
Total Price: $13.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Surgical Robotics Electronics_v2.kicad_pcb

author: john1360
Top
Bottom

2 layer board of 3.50 x 3.50 inches (89.0 x 89.0 mm)
Uploaded: September 11, 2019
Shared: September 12, 2019
Total Price: $61.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy