Shared Projects

Shared Projects

X10 Control module

author: KC8UFV
Top
Bottom

2 layer board of 3.89 x 1.35 inches (98.8 x 34.3 mm)
Uploaded: September 21, 2019
Shared: September 21, 2019
Total Price: $26.20

Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…

Show full description

Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Array prototype v3.2

author: s.parsnejad
Top
Bottom

2 layer board of 2.71 x 1.96 inches (68.7 x 49.7 mm)
Uploaded: September 20, 2019
Shared: September 20, 2019
Total Price: $26.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CosmicTelescopeLED

author: Fixels
Top
Bottom

2 layer board of 0.44 x 0.80 inches (11.3 x 20.3 mm)
Uploaded: September 20, 2019
Shared: September 20, 2019
Total Price: $1.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Serpentine_coil_v3

author: john1360
Top
Bottom

2 layer board of 3.07 x 1.21 inches (78.0 x 30.7 mm)
Uploaded: September 20, 2019
Shared: September 20, 2019
Total Price: $18.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 4.0 microSD Breakout

author: blackketter
Top
Bottom

2 layer board of 0.70 x 0.90 inches (17.8 x 22.9 mm)
Uploaded: September 20, 2019
Shared: September 20, 2019
Total Price: $3.15

Companion microSD breakout board for Teensy 4.0, for use with Teensy 4.0 Header Breakout Board

GitHub

Companion microSD breakout board for Teensy 4.0, for use with Teensy 4.0 Header Breakout Board

GitHub

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

serpentine_coil_V1.kicad_pcb

author: john1360
Top
Bottom

2 layer board of 3.35 x 1.78 inches (85.2 x 45.2 mm)
Uploaded: September 18, 2019
Shared: September 20, 2019
Total Price: $29.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flex_connect_board.kicad_pcb

author: john1360
Top
Bottom

2 layer board of 2.00 x 1.00 inches (50.8 x 25.4 mm)
Uploaded: September 20, 2019
Shared: September 20, 2019
Total Price: $10.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mast Light LED Driver

author: gromain
Top
Bottom

2 layer board of 0.87 x 0.87 inches (22.0 x 22.0 mm)
Uploaded: September 18, 2019
Shared: September 20, 2019
Total Price: $3.75

Designed from Sparkun Femtobuck: https://www.sparkfun.com/products/13716

Designed from Sparkun Femtobuck: https://www.sparkfun.com/products/13716

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

usbXR_v3

author: visakhanc
Top
Bottom

2 layer board of 0.99 x 0.66 inches (25.1 x 16.6 mm)
Uploaded: July 18, 2019
Shared: September 20, 2019
Total Price: $3.20

USB adapter for NRF24L01 2.4GHz Wireless transceiver based on ATmega8 MCU using vusb library NOTE: This version is replaced by the newer version v3.1

USB adapter for NRF24L01 2.4GHz Wireless transceiver based on ATmega8 MCU using vusb library NOTE: This version is replaced by the newer version v3.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

usbXR v3.1

author: visakhanc
Top
Bottom

2 layer board of 0.99 x 0.66 inches (25.1 x 16.6 mm)
Uploaded: August 24, 2019
Shared: September 20, 2019
Total Price: $3.20

usbXR is a USB adapter for 2.4GHz Wireless transceiver based on ATmega8/Atmega328 MCU using vusb library.

This version uses NRF24L01 wireless module.

Visit the project page: https://github.com/visakhanc/usbXR

Changes in v3.1

  1. Ground copper area reduced to increase RF performance. …

Show full description

usbXR is a USB adapter for 2.4GHz Wireless transceiver based on ATmega8/Atmega328 MCU using vusb library.

This version uses NRF24L01 wireless module.

Visit the project page: https://github.com/visakhanc/usbXR

Changes in v3.1

  1. Ground copper area reduced to increase RF performance. …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RapidShark Mainboard Mk 1.i

author: schizobovine
Top
Bottom

2 layer board of 1.40 x 0.70 inches (35.6 x 17.8 mm)
Uploaded: September 07, 2018
Shared: September 20, 2019
Total Price: $4.90

Never considered the inability to distinguish between “1” and “I” since I’d never thought I’d wind up…wherever this revisioning scheme has gone.

Anyway, switching around some layout stuff to accommodate routing all the cabling through the “carry handle” bits. And yes, I know Nerf already made …

Show full description

Never considered the inability to distinguish between “1” and “I” since I’d never thought I’d wind up…wherever this revisioning scheme has gone.

Anyway, switching around some layout stuff to accommodate routing all the cabling through the “carry handle” bits. And yes, I know Nerf already made …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

serpentine_coil_oshpark.kicad_pcb

author: john1360
Top
Bottom

2 layer board of 2.00 x 1.50 inches (50.8 x 38.2 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $15.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nelson Miller Update

author: SBHHI
Top
Bottom

2 layer board of 1.96 x 2.36 inches (49.8 x 60.0 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $23.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Somnus Lock

author: SBHHI
Top
Bottom

2 layer board of 1.96 x 2.36 inches (49.8 x 60.0 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $23.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley A Meyer 9XB POWER BOARD Original from Black Variac Box Patent

author: SecureSupplies
Top
Bottom

2 layer board of 5.13 x 4.35 inches (130.3 x 110.5 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $111.60

Stanley A Meyer 9XB POWER BOARD Original from Black Variac Box Patent www.stanleyameyer.com

Stanley A Meyer 9XB POWER BOARD Original from Black Variac Box Patent www.stanleyameyer.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Odrive Encoder/Hall Board

author: tlalexander
Top
Bottom

2 layer board of 1.31 x 2.11 inches (33.2 x 53.5 mm)
Uploaded: July 20, 2019
Shared: September 19, 2019
Total Price: $13.75

Adds JST XH connectors to the Odrive

Adds JST XH connectors to the Odrive

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley A Meyer Distributor GMS Water Fueled Buggy Gerber

author: SecureSupplies
Top
Bottom

2 layer board of 5.13 x 3.95 inches (130.3 x 100.3 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $101.20

Stanley A Meyer Distributor GMS Water Fueled Buggy Gerber www.stanleyameyer.com

Stanley A Meyer Distributor GMS Water Fueled Buggy Gerber www.stanleyameyer.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Particle Gen 3 Carrier Board

author: chipmc
Top
Bottom

2 layer board of 3.54 x 1.52 inches (90.0 x 38.6 mm)
Uploaded: September 19, 2019
Shared: September 19, 2019
Total Price: $26.90

Carrier Board for the Boron / Xenon / Argon

Carrier Board for the Boron / Xenon / Argon

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vlmu60cl

author: ciara
Top
Bottom

2 layer board of 0.44 x 0.81 inches (11.1 x 20.7 mm)
Uploaded: September 18, 2019
Shared: September 18, 2019
Total Price: $1.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vlmu35cm

author: ciara
Top
Bottom

2 layer board of 0.44 x 0.81 inches (11.1 x 20.7 mm)
Uploaded: September 18, 2019
Shared: September 18, 2019
Total Price: $1.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy