PCA9548 Board Adapter - V01
author: GeertVc
2 layer board of 1.85 x 2.50 inches (47.0 x 63.6 mm)
Uploaded:
October 14, 2019
Shared:
November 15, 2019
Total Price:
$23.15
This board makes it easy to use a PCA9548 I2C multiplexer in your projects. It has Phoenix Contact MKDSN 1,5/ 2-5,08 connectors (12 in total) to connect all I2C buses (one in and 8 out) as well as power supply, reset and address selection (you can have up to 8 I2C multiplexers on the same I2…
Show full description
This board makes it easy to use a PCA9548 I2C multiplexer in your projects. It has Phoenix Contact MKDSN 1,5/ 2-5,08 connectors (12 in total) to connect all I2C buses (one in and 8 out) as well as power supply, reset and address selection (you can have up to 8 I2C multiplexers on the same I2…
Show full description
12v-booster.kicad_pcb
author: aaronw
2 layer board of 0.87 x 0.41 inches (22.1 x 10.5 mm)
Uploaded:
November 15, 2019
Shared:
November 15, 2019
Total Price:
$1.80
This board takes 3.5 - 8v and boosts it to 12v. It should be able to provide up to 400ma. https://github.com/aaronw2/12v-Boost-Fan-Control
This board takes 3.5 - 8v and boosts it to 12v. It should be able to provide up to 400ma. https://github.com/aaronw2/12v-Boost-Fan-Control
light-sensor.kicad_pcb
author: aaronw
2 layer board of 0.57 x 0.47 inches (14.5 x 11.9 mm)
Uploaded:
November 15, 2019
Shared:
November 15, 2019
Total Price:
$1.30
Proximity and gesture sensor based on the ADUX1020. Revision 1.0. Note that this board has not been tested yet.
Proximity and gesture sensor based on the ADUX1020. Revision 1.0. Note that this board has not been tested yet.
Joycon Analog Stick Breakout Board
author: PortaPackIt
2 layer board of 0.50 x 0.45 inches (12.8 x 11.5 mm)
Uploaded:
November 14, 2019
Shared:
November 14, 2019
Total Price:
$1.10
Simple breakout board meant for Joycon analog sticks. The connector that it uses is this. https://www.digikey.com/product-detail/en/molex-llc/5051100592/WM12361CT-ND/5726211
Simple breakout board meant for Joycon analog sticks. The connector that it uses is this. https://www.digikey.com/product-detail/en/molex-llc/5051100592/WM12361CT-ND/5726211
MegaRAM
author: d18c7db
2 layer board of 2.85 x 1.73 inches (72.4 x 44.0 mm)
Uploaded:
November 12, 2019
Shared:
November 14, 2019
Total Price:
$24.65
Megawing board that fits Pipistrello and Papilio FPGA boards. Provides dual 4Mbyte of fast 10ns SRAM. All memory has 16 bit data bus for increased throughput. Memory chip is a IS61WV204816BLL-10 or any other pin compatible.
Megawing board that fits Pipistrello and Papilio FPGA boards. Provides dual 4Mbyte of fast 10ns SRAM. All memory has 16 bit data bus for increased throughput. Memory chip is a IS61WV204816BLL-10 or any other pin compatible.
MegaFlash
author: d18c7db
2 layer board of 2.62 x 1.63 inches (66.6 x 41.4 mm)
Uploaded:
November 14, 2019
Shared:
November 14, 2019
Total Price:
$21.35
Megawing board that fits Pipistrello and Papilio FPGA boards. Provides 4Mbyte of fast 10ns SRAM and 16MByte of 55ns FLASH. All memory has 16 bit data bus for increased throughput. Memory chips are IS61WV204816BLL-10 and SST39LF800A-55
Megawing board that fits Pipistrello and Papilio FPGA boards. Provides 4Mbyte of fast 10ns SRAM and 16MByte of 55ns FLASH. All memory has 16 bit data bus for increased throughput. Memory chips are IS61WV204816BLL-10 and SST39LF800A-55
Raspberry Pi RaspberryPagernRF24 QWERTY version
author: incyi
2 layer board of 2.81 x 4.26 inches (71.3 x 108.1 mm)
Uploaded:
November 14, 2019
Shared:
November 14, 2019
Total Price:
$59.70
This project was originaly made in AZERTY by ccadic (https://github.com/ccadic) But he removed everything from github.
SnapOnAir Raspberry PI ZERO PCB I modified it to QWERTY and placed again on GitHub.
https://github.com/incyi/RaspberryPagernRF24
This project was originaly made in AZERTY by ccadic (https://github.com/ccadic) But he removed everything from github.
SnapOnAir Raspberry PI ZERO PCB I modified it to QWERTY and placed again on GitHub.
https://github.com/incyi/RaspberryPagernRF24
FlyPez_J005412REVA
author: jET_Janelia_HHMI
2 layer board of 2.35 x 1.74 inches (59.7 x 44.1 mm)
Uploaded:
April 22, 2019
Shared:
November 14, 2019
Total Price:
$20.40
FlyPezPower J007944A
author: jET_Janelia_HHMI
2 layer board of 3.81 x 5.40 inches (96.7 x 137.2 mm)
Uploaded:
November 12, 2019
Shared:
November 14, 2019
Total Price:
$102.80
IGBT Bridge V3
author: Extreme-Electronics
2 layer board of 1.98 x 2.36 inches (50.3 x 60.0 mm)
Uploaded:
September 25, 2017
Shared:
November 14, 2019
Total Price:
$23.35
IGBT Bridge V3
IGBT Bridge V3
Xbox 360 JTAG QSB
author: Element18592
2 layer board of 0.96 x 0.54 inches (24.4 x 13.7 mm)
Uploaded:
November 11, 2019
Shared:
November 13, 2019
Total Price:
$2.55
A simple JTAG QSB for the xbox 360.
This is a very simple board so there aren't any reference designators on it. Anyone who might find this useful should be able to tell where each component goes.
Parts:
2 - 1N4148WS-7-F Diodes
1 - 1005 330ohm Resistor (0603 works as well)
1 - 1005…
Show full description
A simple JTAG QSB for the xbox 360.
This is a very simple board so there aren't any reference designators on it. Anyone who might find this useful should be able to tell where each component goes.
Parts:
2 - 1N4148WS-7-F Diodes
1 - 1005 330ohm Resistor (0603 works as well)
1 - 1005…
Show full description
