pc-key.kicad_pcb
2 layer board of 1.41 x 1.53 inches (35.7 x 38.9 mm)
Uploaded:
April 21st 2020
Shared:
April 23rd 2020
Total Price:
$10.75
PS/2 to parallel keyboard adapter. This board is designed to connect directly to the ZRT80 terminal board but could be used with almost anything needing 8bit parallel with strobe.
PS/2 to parallel keyboard adapter. This board is designed to connect directly to the ZRT80 terminal board but could be used with almost anything needing 8bit parallel with strobe.
fdc-adapt.kicad_pcb
2 layer board of 1.31 x 3.38 inches (33.2 x 85.9 mm)
Uploaded:
April 8th 2020
Shared:
April 23rd 2020
Total Price:
$22.05
50 pin to 34 pin floppy adapter. Includes motor control oneshot triggered by drive select. Allows a modern (3.5,5.25) floppy drive to connect to a controller designed for 8" drives.
50 pin to 34 pin floppy adapter. Includes motor control oneshot triggered by drive select. Allows a modern (3.5,5.25) floppy drive to connect to a controller designed for 8" drives.
scsi-floppy
2 layer board of 5.01 x 3.01 inches (127.2 x 76.4 mm)
Uploaded:
March 27th 2018
Shared:
April 23rd 2020
Total Price:
$75.20
This is ver. 2 of my SCSI to floppy disk interface. It implements SASI/SCSI-1 interface. I support 720k disks (512byte/9 sectors/2 side/80 tracks) But other formats could be supported.
Code and schematic is at https://www.github.com/joelang/scsi-floppy
This is ver. 2 of my SCSI to floppy disk interface. It implements SASI/SCSI-1 interface. I support 720k disks (512byte/9 sectors/2 side/80 tracks) But other formats could be supported.
Code and schematic is at https://www.github.com/joelang/scsi-floppy
pdp-panel.kicad_pcb
2 layer board of 2.61 x 2.43 inches (66.2 x 61.6 mm)
Uploaded:
February 20th 2019
Shared:
April 23rd 2020
Total Price:
$31.60
Switch panel for PDP/lSI-11 QBUS backplane. includes power switch and sequencing, halt/run with indicator and LTC.
Switch panel for PDP/lSI-11 QBUS backplane. includes power switch and sequencing, halt/run with indicator and LTC.
