Shared Projects

Shared Projects

A third Teensy 4.0 breakout board WITHOUT USB host

author: trainer4edu
Top
Bottom

2 layer board of 2.08 x 0.70 inches (52.8 x 17.6 mm)
Uploaded: November 05, 2019
Shared: November 05, 2019
Total Price: $7.20

A Teensy 4.0 breakout board with 3.6 footprint without USB host support. If you don't need USB Host applications you can order this one, it's a bit cheaper, otherwise order FRDM4236-V3 board.

It includes an on-board micro SD card slot for the Teensy 4.0. It's tested OK with Bill Greiman's …

Show full description

A Teensy 4.0 breakout board with 3.6 footprint without USB host support. If you don't need USB Host applications you can order this one, it's a bit cheaper, otherwise order FRDM4236-V3 board.

It includes an on-board micro SD card slot for the Teensy 4.0. It's tested OK with Bill Greiman's …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SRAM-Adapter

author: nicolasnoble
Top
Bottom

2 layer board of 1.84 x 1.01 inches (46.8 x 25.5 mm)
Uploaded: November 05, 2019
Shared: November 05, 2019
Total Price: $9.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mech99 Main Board v3

author: GhengisDhon
Top
Bottom

2 layer board of 4.20 x 4.20 inches (106.7 x 106.7 mm)
Uploaded: February 11, 2018
Shared: November 05, 2019
Total Price: $88.20

Mech99 Main Board v3

Mech99 Main Board v3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PSX PIO Dev Board v1.0b

author: nicolasnoble
Top
Bottom

2 layer board of 5.24 x 2.50 inches (133.0 x 63.5 mm)
Uploaded: November 05, 2019
Shared: November 05, 2019
Total Price: $65.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TVS Test Board Gerber

author: gunrunnerjohn
Top
Bottom

2 layer board of 0.44 x 0.31 inches (11.0 x 7.8 mm)
Uploaded: November 04, 2019
Shared: November 04, 2019
Total Price: $0.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EndConnectors.kicad_pcb

author: Sputnik7
Top
Bottom

2 layer board of 0.72 x 0.37 inches (18.4 x 9.4 mm)
Uploaded: August 28, 2019
Shared: November 04, 2019
Total Price: $1.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dual Regulator Ver. 1.0

author: Barbouri
Top
Bottom

2 layer board of 1.00 x 0.99 inches (25.4 x 25.1 mm)
Uploaded: September 16, 2019
Shared: November 04, 2019
Total Price: $4.90

Dual Bi-Polar Voltage Regulator +/- 15 volts at 150 mA. Maximum +/- 20 volt Input Maximum LT3032 Connect SHDN: to IPS to turn on, and GND to turn off

<https://www.barbouri.com/2019/11/03/ultra-low-thd-sine-wave-generator/> ![Dual Regulator Ver. 1.0](https://www.barbouri.com/wp-content/upload…

Show full description

Dual Bi-Polar Voltage Regulator +/- 15 volts at 150 mA. Maximum +/- 20 volt Input Maximum LT3032 Connect SHDN: to IPS to turn on, and GND to turn off

<https://www.barbouri.com/2019/11/03/ultra-low-thd-sine-wave-generator/> ![Dual Regulator Ver. 1.0](https://www.barbouri.com/wp-content/upload…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TestLed.kicad_pcb

author: Sputnik7
Top
Bottom

2 layer board of 1.00 x 0.80 inches (25.5 x 20.4 mm)
Uploaded: November 04, 2019
Shared: November 04, 2019
Total Price: $4.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PC2APLJOY

author: evilxyzzy
Top
Bottom

2 layer board of 0.78 x 1.48 inches (19.8 x 37.6 mm)
Uploaded: November 03, 2019
Shared: November 03, 2019
Total Price: $5.75

IBM to Apple joystick adapter as I previously did kits for. If you can't find the assembly doc online, email me for it ( [email protected] ) Based on Jeff Hurlhurt's schematic/design,

IBM to Apple joystick adapter as I previously did kits for. If you can't find the assembly doc online, email me for it ( [email protected] ) Based on Jeff Hurlhurt's schematic/design,

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreeEEG32 + alpha1.5

author: NeuroIDSS
Top
Bottom

4 layer board of 2.76 x 2.76 inches (70.2 x 70.2 mm)
Uploaded: August 09, 2019
Shared: November 03, 2019
Total Price: $76.20

4xAD7771BCPZ 64 kSPS, ADR4525BRZ 2.5V REF +-0.02%, STM32H743ZIT6 MCU 1027 DMIPS

4xAD7771BCPZ 64 kSPS, ADR4525BRZ 2.5V REF +-0.02%, STM32H743ZIT6 MCU 1027 DMIPS

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCBmodE Blinky

author: tardate
Top
Bottom

2 layer board of 0.99 x 0.99 inches (25.1 x 25.1 mm)
Uploaded: November 03, 2019
Shared: November 03, 2019
Total Price: $4.85

A PCBmodE tutorial for a simple 555 timer LED blinky circuit

A PCBmodE tutorial for a simple 555 timer LED blinky circuit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Boldport Widlar

author: tardate
Top
Bottom

2 layer board of 2.37 x 2.37 inches (60.1 x 60.1 mm)
Uploaded: November 03, 2019
Shared: November 03, 2019
Total Price: $27.95

Just a test of board generation with PCBmodE

Just a test of board generation with PCBmodE

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCE-pad-2-button-turbo-gerbers

author: Buttersoft
Top
Bottom

2 layer board of 1.52 x 1.40 inches (38.7 x 35.5 mm)
Uploaded: November 03, 2019
Shared: November 03, 2019
Total Price: $10.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY Wii Sensor Bar

author: hernan43
Top
Bottom

2 layer board of 3.56 x 0.36 inches (90.3 x 9.2 mm)
Uploaded: November 03, 2019
Shared: November 03, 2019
Total Price: $6.40

I have no idea if this will work. This is for my own personal use. I used the LED series wizard at http://led.linear1.org/led.wiz to design the schematic.

I used a "manual" version of this and it did work fine. I've decided to try and make a PCB version so I can clip it to my laptop bezel. Use…

Show full description

I have no idea if this will work. This is for my own personal use. I used the LED series wizard at http://led.linear1.org/led.wiz to design the schematic.

I used a "manual" version of this and it did work fine. I've decided to try and make a PCB version so I can clip it to my laptop bezel. Use…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

480.kicad_pcb

author: ece480_DT11
Top
Bottom

2 layer board of 2.92 x 6.69 inches (74.1 x 169.8 mm)
Uploaded: November 02, 2019
Shared: November 02, 2019
Total Price: $97.45

ECE 480 DT11 lidar interface board

ECE 480 DT11 lidar interface board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pwmmotorcontrollerrev1

author: BeeMan
Top
Bottom

2 layer board of 3.00 x 2.00 inches (76.2 x 50.8 mm)
Uploaded: October 31, 2019
Shared: November 01, 2019
Total Price: $30.00

12-90VDC PWM Motor Controller BOM at https://github.com/cvwarne/PWM-Controller.git

12-90VDC PWM Motor Controller BOM at https://github.com/cvwarne/PWM-Controller.git

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

XBEE SX MODEM

author: eschomer43
Top
Bottom

2 layer board of 2.35 x 2.76 inches (59.7 x 70.1 mm)
Uploaded: November 01, 2019
Shared: November 01, 2019
Total Price: $32.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiP ProtoPack

author: tiogaplanet
Top
Bottom

2 layer board of 1.64 x 2.52 inches (41.6 x 64.0 mm)
Uploaded: July 04, 2018
Shared: October 31, 2019
Total Price: $20.60

A prototyping daughterboard for the MiP_ProMini-Pack.

A prototyping daughterboard for the MiP_ProMini-Pack.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiP D1 mini Pack v2

author: tiogaplanet
Top
Bottom

2 layer board of 1.64 x 2.52 inches (41.6 x 63.9 mm)
Uploaded: August 25, 2018
Shared: October 31, 2019
Total Price: $20.60

A board to adapt the Wemos D1 mini and compatible boards to WowWee’s MiP robot.

A board to adapt the Wemos D1 mini and compatible boards to WowWee’s MiP robot.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Team 4296 LED Flasher

author: SteveGarward
Top
Bottom

2 layer board of 1.18 x 1.54 inches (30.0 x 39.1 mm)
Uploaded: October 31, 2019
Shared: October 31, 2019
Total Price: $9.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy