Shared Projects

Shared Projects

MakeCode Arcade RPi0 Shield

author: mmoskal
Top
Bottom

2 layer board of 2.56 x 1.73 inches (65.0 x 44.0 mm)
Uploaded: November 19, 2019
Shared: November 19, 2019
Total Price: $22.10

Makes it easy to connect buttons, see https://arcade.makecode.com/hardware/raspberry-pi/cardboard-control-panel

Makes it easy to connect buttons, see https://arcade.makecode.com/hardware/raspberry-pi/cardboard-control-panel

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Connection to nSOT and TF Version 2

author: Zhengchao
Top
Bottom

2 layer board of 1.02 x 1.14 inches (26.0 x 29.0 mm)
Uploaded: November 19, 2019
Shared: November 19, 2019
Total Price: $5.80

Another version of the PCB board that connects to nSOT and Tuning Fork

Another version of the PCB board that connects to nSOT and Tuning Fork

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Connection to nSOT and TF

author: Zhengchao
Top
Bottom

2 layer board of 1.02 x 1.14 inches (26.0 x 29.0 mm)
Uploaded: November 19, 2019
Shared: November 19, 2019
Total Price: $5.80

PCB board that connect to nSOT and Tuning Fork

PCB board that connect to nSOT and Tuning Fork

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HCB_V1

author: bpcham
Top
Bottom

4 layer board of 3.56 x 3.79 inches (90.4 x 96.2 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $134.70

DN:81472

DN:81472

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PSX PIO Dev Board v2.0

author: nicolasnoble
Top
Bottom

2 layer board of 2.93 x 2.50 inches (74.5 x 63.5 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $36.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED Board.kicad_pcb

author: aerobat
Top
Bottom

2 layer board of 0.63 x 2.29 inches (15.9 x 58.1 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $7.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8MD to DVI-I

author: RGB
Top
Bottom

2 layer board of 1.46 x 1.00 inches (37.0 x 25.5 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $7.30

For use with the Datapath Vision RGB-E1S.

For use with the Datapath Vision RGB-E1S.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8MD to SCART

author: RGB
Top
Bottom

2 layer board of 1.53 x 1.79 inches (38.8 x 45.5 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $13.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bspecRec 5

author: mmcpartlan98
Top
Bottom

2 layer board of 3.96 x 3.96 inches (100.5 x 100.5 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $78.25

LMU bSpec V2.0.1PROT

LMU bSpec V2.0.1PROT

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8MD to HD15

author: RGB
Top
Bottom

2 layer board of 1.22 x 1.18 inches (31.0 x 30.0 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $7.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueGenie v2

author: dzid26
Top
Bottom

2 layer board of 1.05 x 1.60 inches (26.6 x 40.5 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $8.30

BMW BLuetooth audio with CANbus mcp2515 https://github.com/dzid26/BlueGenieBMW

BMW BLuetooth audio with CANbus mcp2515 https://github.com/dzid26/BlueGenieBMW

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Neutrik NC3MAV-0 Backplate - 2019-11-17 - v2

author: Fayne_Rogue
Top
Bottom

2 layer board of 0.91 x 0.91 inches (23.1 x 23.1 mm)
Uploaded: November 17, 2019
Shared: November 18, 2019
Total Price: $4.10

Neutrik NC3MAV-0 backplate with dedicated chassis ground.

Neutrik NC3MAV-0 backplate with dedicated chassis ground.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Neutrik NC4FAV Backplate - 2019-11-17 - v2

author: Fayne_Rogue
Top
Bottom

2 layer board of 0.91 x 0.96 inches (23.1 x 24.4 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $4.35

Neutrik NC4FAV Backplate with ground connector and jumper to bridge ground to connector ground.

Neutrik NC4FAV Backplate with ground connector and jumper to bridge ground to connector ground.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Neutrik NCJ6FA-V Backplate - 2019-11-18 - v1

author: Fayne_Rogue
Top
Bottom

2 layer board of 0.91 x 1.06 inches (23.1 x 27.0 mm)
Uploaded: November 18, 2019
Shared: November 18, 2019
Total Price: $4.80

Neutrik NCJ6FA-V Backplate

Has dedicated connectors for XLR and TRS. Optional jumpers to combine XLR and TRS signals. Optional chassis ground connector.

Neutrik NCJ6FA-V Backplate

Has dedicated connectors for XLR and TRS. Optional jumpers to combine XLR and TRS signals. Optional chassis ground connector.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OmniT_11_17_Ver1_3

author: bgsail
Top
Bottom

2 layer board of 2.00 x 2.00 inches (50.8 x 50.8 mm)
Uploaded: November 17, 2019
Shared: November 17, 2019
Total Price: $19.95

MSP430G2553 multipurpose board

MSP430G2553 multipurpose board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32L4S9DevBoard.v01a

author: PeskyProducts
Top
Bottom

4 layer board of 0.70 x 1.41 inches (17.8 x 35.7 mm)
Uploaded: November 17, 2019
Shared: November 17, 2019
Total Price: $9.80

Replaced NCV8170AMX330 (3.3V, 150 mA, Iq = 500 nA) with MCP1812 (3V3, 300 mA, Iq = 50 nA), and replaced Panasonic EVPAFF tac buttons with larger C&K PTS810 buttons. Details of project here.

Replaced NCV8170AMX330 (3.3V, 150 mA, Iq = 500 nA) with MCP1812 (3V3, 300 mA, Iq = 50 nA), and replaced Panasonic EVPAFF tac buttons with larger C&K PTS810 buttons. Details of project here.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

teensy-plus.kicad_pcb

author: aaronw
Top
Bottom

2 layer board of 1.20 x 1.55 inches (30.5 x 39.4 mm)
Uploaded: November 17, 2019
Shared: November 17, 2019
Total Price: $9.30

Daughter board for Teensy 3.2/4.0 that provides a TXB0104 level shifter and a WS2813mini NeoPixel. This board is designed to support up to four chains of NeoPixels and is compatible with the FastLED library for the Teensy 3.2 (unknown about 4.0).

See https://github.com/aaronw2/teensy-plus

Daughter board for Teensy 3.2/4.0 that provides a TXB0104 level shifter and a WS2813mini NeoPixel. This board is designed to support up to four chains of NeoPixels and is compatible with the FastLED library for the Teensy 3.2 (unknown about 4.0).

See https://github.com/aaronw2/teensy-plus

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vp 2019-11b_2019-11-17

author: dhsi
Top
Bottom

2 layer board of 1.09 x 1.80 inches (27.8 x 45.8 mm)
Uploaded: November 17, 2019
Shared: November 17, 2019
Total Price: $9.80

variable pitch but with capacitor and button

variable pitch but with capacitor and button

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

(S)NES2USB

author: eaconner
Top
Bottom

2 layer board of 0.63 x 0.86 inches (15.9 x 21.8 mm)
Uploaded: November 16, 2019
Shared: November 16, 2019
Total Price: $2.65

Upgrade your NES or SNES controller to USB. Can be put inside the controller, or build real NES/SNES ports onto your computer. Works with standard controllers (original, Max, dogbone, Advantage, etc), does not work with peripherals (Zapper, FourScore, etc).

Upgrade your NES or SNES controller to USB. Can be put inside the controller, or build real NES/SNES ports onto your computer. Works with standard controllers (original, Max, dogbone, Advantage, etc), does not work with peripherals (Zapper, FourScore, etc).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BiasTeeGerbers

author: acalvin
Top
Bottom

2 layer board of 3.50 x 1.50 inches (89.0 x 38.2 mm)
Uploaded: November 15, 2019
Shared: November 15, 2019
Total Price: $26.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy