Shared Projects

Shared Projects

power-test-1.kicad_pcb

author: tills
Top
Bottom

2 layer board of 1.52 x 0.95 inches (38.6 x 24.0 mm)
Uploaded: January 28, 2019
Shared: December 02, 2019
Total Price: $7.15

USB-C to 3.3V power supply and UART.

The board converts USB-C 5V power to 3.3V (up to 15W). It also hosts a USB-RS232 bridge which connects to USB-C by default but is optionally switched to a micro-USB port.

Power is always drawn from USB-C.

USB-C connector: power + UART. USB-micro-B co…

Show full description

USB-C to 3.3V power supply and UART.

The board converts USB-C 5V power to 3.3V (up to 15W). It also hosts a USB-RS232 bridge which connects to USB-C by default but is optionally switched to a micro-USB port.

Power is always drawn from USB-C.

USB-C connector: power + UART. USB-micro-B co…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sot23-prog-v1.kicad_pcb

author: tills
Top
Bottom

2 layer board of 0.67 x 1.19 inches (17.0 x 30.3 mm)
Uploaded: June 25, 2019
Shared: December 02, 2019
Total Price: $3.95

Breakout board for SOT-23 (programmer) socket (WELLS CTI 499-P44-20). Can be used as a programmer for the Azoteq IQS211A.

Breakout board for SOT-23 (programmer) socket (WELLS CTI 499-P44-20). Can be used as a programmer for the Azoteq IQS211A.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3array Cell with ground plate

author: S
Top
Bottom

2 layer board of 3.99 x 1.00 inches (101.4 x 25.4 mm)
Uploaded: December 09, 2014
Shared: December 02, 2019
Total Price: $19.95

Rev 1

Rev 1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wireshark 0x4e00 by TwinkleTwinkie & Nick Pisarro

author: TwinkleTwinkie
Top
Bottom

4 layer board of 3.94 x 2.05 inches (100.1 x 52.0 mm)
Uploaded: December 02, 2019
Shared: December 02, 2019
Total Price: $80.60

Wireshark is a Pin Badge designed by TwinkleTwinkie & Nick Pisarro. When assembled and programmed it plays the Baby Shark theme over a Piezo Buzzer.

BOM & Firmware can be found here: https://hackaday.io/project/168570-wireshark-0x4e00

Wireshark is a Pin Badge designed by TwinkleTwinkie & Nick Pisarro. When assembled and programmed it plays the Baby Shark theme over a Piezo Buzzer.

BOM & Firmware can be found here: https://hackaday.io/project/168570-wireshark-0x4e00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB Mod 9

author: michael.manders
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.5 x 25.5 mm)
Uploaded: December 02, 2019
Shared: December 02, 2019
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cap2pi.kicad_pcb

author: mincepi
Top
Bottom

2 layer board of 0.41 x 0.67 inches (10.5 x 16.9 mm)
Uploaded: December 02, 2019
Shared: December 02, 2019
Total Price: $1.35

555 timer circuit that attaches to a mini variable tuning capacitor. Used with https://sites.google.com/site/mincepi/cap2pi to allow a variable capacitor to be used as an input device for the Raspberry Pi.

555 timer circuit that attaches to a mini variable tuning capacitor. Used with https://sites.google.com/site/mincepi/cap2pi to allow a variable capacitor to be used as an input device for the Raspberry Pi.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pwrterm

author: davedarko
Top
Bottom

2 layer board of 0.70 x 2.20 inches (17.8 x 55.9 mm)
Uploaded: December 02, 2019
Shared: December 02, 2019
Total Price: $7.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 4 Combo USB/SD Breakout Board

author: blackketter
Top
Bottom

2 layer board of 0.90 x 0.90 inches (22.9 x 22.9 mm)
Uploaded: December 01, 2019
Shared: December 01, 2019
Total Price: $4.05

From https://github.com/blackketter/teensy4_combo_breakout

From https://github.com/blackketter/teensy4_combo_breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shunt regulator

author: pan_environment_super_cyborg
Top
Bottom

2 layer board of 3.21 x 4.06 inches (81.4 x 103.0 mm)
Uploaded: April 08, 2014
Shared: December 01, 2019
Total Price: $65.00

bipolar shunt regulator

bipolar shunt regulator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Toslink to SPDIF adaptor

author: pan_environment_super_cyborg
Top
Bottom

2 layer board of 7.01 x 0.86 inches (178.0 x 21.8 mm)
Uploaded: June 10, 2017
Shared: December 01, 2019
Total Price: $30.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Twot.kicad_pcb

author: FoxBuild
Top
Bottom

2 layer board of 1.41 x 2.21 inches (35.7 x 56.0 mm)
Uploaded: January 27, 2019
Shared: December 01, 2019
Total Price: $15.50

Shield for the Wemos ESP32 MH ET used to run 2 brushless motors with some extra power and ground pins. Use for a 2 wheel robot.

Shield for the Wemos ESP32 MH ET used to run 2 brushless motors with some extra power and ground pins. Use for a 2 wheel robot.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rust Bunny

author: midwayfair
Top
Bottom

2 layer board of 1.98 x 1.53 inches (50.2 x 38.7 mm)
Uploaded: March 30, 2015
Shared: December 01, 2019
Total Price: $15.05

Modified Fuzzstainer (with buffers)

Modified Fuzzstainer (with buffers)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Oscillateur Programmable

author: CosmosAmiga
Top
Bottom

2 layer board of 0.72 x 0.44 inches (18.3 x 11.3 mm)
Uploaded: July 31, 2014
Shared: December 01, 2019
Total Price: $1.55

Oscillo Prog

Oscillo Prog

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB_Uno

author: artag
Top
Bottom

2 layer board of 2.72 x 2.12 inches (69.0 x 53.8 mm)
Uploaded: December 01, 2019
Shared: December 01, 2019
Total Price: $28.70

AR488 for Arduino Uno and ribbon cable

AR488 for Arduino Uno and ribbon cable

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini Paddle springboard v4

author: w6ipa
Top
Bottom

2 layer board of 1.59 x 0.48 inches (40.3 x 12.3 mm)
Uploaded: December 01, 2019
Shared: December 01, 2019
Total Price: $3.80

Paddle springboards Order in 2 oz copper - 0.8mm PCB.

Paddle springboards Order in 2 oz copper - 0.8mm PCB.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

KegMaster_Satellite_Gerber

author: JohnGrenard
Top
Bottom

2 layer board of 2.54 x 1.73 inches (64.5 x 44.0 mm)
Uploaded: November 30, 2019
Shared: November 30, 2019
Total Price: $21.95

This is the Keg Master Satellite PIC MCU PCB file, in support of the larger Keg Master project. The overall design uses one of these boards per tap.

Software Repo: https://github.com/Le-Grenadier/KegMaster_Satellite

This is the Keg Master Satellite PIC MCU PCB file, in support of the larger Keg Master project. The overall design uses one of these boards per tap.

Software Repo: https://github.com/Le-Grenadier/KegMaster_Satellite

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Spoke Pmod M-LVDS V0.4

author: davidthings
Top
Bottom

2 layer board of 1.16 x 0.81 inches (29.4 x 20.5 mm)
Uploaded: March 26, 2019
Shared: November 30, 2019
Total Price: $4.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Camera Cartridge V0.1

author: davidthings
Top
Bottom

2 layer board of 2.68 x 1.31 inches (68.0 x 33.3 mm)
Uploaded: November 07, 2019
Shared: November 30, 2019
Total Price: $17.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CPC Floppy Disk Adapter Board

author: LambdaMikel
Top
Bottom

2 layer board of 3.41 x 3.41 inches (86.5 x 86.5 mm)
Uploaded: November 15, 2019
Shared: November 30, 2019
Total Price: $58.00

Amstrad CPC Universal Floppy Disk Adapter. Connect the DDI-1 Amstrad disk interface to I1 and I2, or the DDI-3 or DDI-4 using either I1 or I2, and connect up to 3 disk drives using standard unmodified 1-to-1 34 pin PC floppy ribbon cables. There is a DIP switch for setting the READY signal and s…

Show full description

Amstrad CPC Universal Floppy Disk Adapter. Connect the DDI-1 Amstrad disk interface to I1 and I2, or the DDI-3 or DDI-4 using either I1 or I2, and connect up to 3 disk drives using standard unmodified 1-to-1 34 pin PC floppy ribbon cables. There is a DIP switch for setting the READY signal and s…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NAVA Muxboard V2 TH IC111 by BANZAI DIY

author: TEAMBANZAI
Top
Bottom

2 layer board of 2.26 x 1.46 inches (57.3 x 37.0 mm)
Uploaded: October 28, 2019
Shared: November 29, 2019
Total Price: $16.40

NAVA Muxboard V2 IC111

NAVA Muxboard V2 IC111

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy