Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

iSpindelShield v2.0.3

author: Rockabye74
Top
Bottom

2 layer board of 5.09 x 1.63 inches (129.2 x 41.3 mm)
Uploaded: March 02, 2019
Shared: January 31, 2020
Total Price: $41.30

iSpindel v2.0.3 Tilt Hydrometer for Petling XXL GeoCache, uses Arduino Mini D1, TP4056 LiPo Charger (4-pin), MPU6050 Accel/Gyro, DS18B20 Temperature Probe, 230K Resistor, 4.7K Resistor, Bat43 Diode, 1043P Battery Holder, 18650 LiPo Battery, and 27 gram weight.

For my iSpindels, I connected a m…

Show full description

iSpindel v2.0.3 Tilt Hydrometer for Petling XXL GeoCache, uses Arduino Mini D1, TP4056 LiPo Charger (4-pin), MPU6050 Accel/Gyro, DS18B20 Temperature Probe, 230K Resistor, 4.7K Resistor, Bat43 Diode, 1043P Battery Holder, 18650 LiPo Battery, and 27 gram weight.

For my iSpindels, I connected a m…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIYB0XX Power Strip

author: Crane1195
Top
Bottom

2 layer board of 1.40 x 0.60 inches (35.6 x 15.3 mm)
Uploaded: January 31, 2020
Shared: January 31, 2020
Total Price: $4.20

Board for connecting common power and data points. 5V and GND are usually the only two needed, but if you have an internal GCC to USB adapter for example, you'll want extra points for 3V and Data, so I included them.

Board for connecting common power and data points. 5V and GND are usually the only two needed, but if you have an internal GCC to USB adapter for example, you'll want extra points for 3V and Data, so I included them.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QuadcopterFinal.brd

author: anshul-sanam
Top
Bottom

2 layer board of 1.54 x 1.43 inches (39.2 x 36.4 mm)
Uploaded: July 05, 2017
Shared: January 31, 2020
Total Price: $11.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wired 360 Controller USB-C Mod V1.4

author: HDR
Top
Bottom

2 layer board of 0.57 x 1.45 inches (14.5 x 36.9 mm)
Uploaded: January 31, 2020
Shared: January 31, 2020
Total Price: $4.10

A board that converts a wired 360 controller to USB-C

BOM:

TYPE-C-31-M-12

1x5 2,54mm pitch header

Resistor 5.1K x 2 (only required if you want USB-C to USB-C)

Changelog 1.4:

  • Replaced usb c socket with something way better.

A board that converts a wired 360 controller to USB-C

BOM:

TYPE-C-31-M-12

1x5 2,54mm pitch header

Resistor 5.1K x 2 (only required if you want USB-C to USB-C)

Changelog 1.4:

  • Replaced usb c socket with something way better.
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESPEyeandEars.v01

author: PeskyProducts
Top
Bottom

4 layer board of 1.18 x 1.18 inches (30.0 x 30.0 mm)
Uploaded: January 30, 2020
Shared: January 30, 2020
Total Price: $13.90

ESP32 PICO D4 with OV2640 camera, stereo ICS43434 I2S microphones, and SDIO card reader for data capture. Based on the ESP32Eye.

ESP32 PICO D4 with OV2640 camera, stereo ICS43434 I2S microphones, and SDIO card reader for data capture. Based on the ESP32Eye.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Piksi_Mother_Board_v1

author: boz336
Top
Bottom

2 layer board of 2.88 x 2.88 inches (73.2 x 73.2 mm)
Uploaded: November 24, 2019
Shared: January 30, 2020
Total Price: $41.45

Take 2

Take 2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

t-connector.v2

author: randuhmm
Top
Bottom

2 layer board of 0.41 x 0.41 inches (10.5 x 10.5 mm)
Uploaded: October 03, 2019
Shared: January 30, 2020
Total Price: $0.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

led-plate_v1

author: randuhmm
Top
Bottom

2 layer board of 0.54 x 0.25 inches (13.8 x 6.4 mm)
Uploaded: October 03, 2019
Shared: January 30, 2020
Total Price: $0.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pcb

author: graham22
Top
Bottom

2 layer board of 1.69 x 3.05 inches (42.9 x 77.3 mm)
Uploaded: April 24, 2019
Shared: January 30, 2020
Total Price: $25.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SkyeTrackerV7.2.zip

author: graham22
Top
Bottom

2 layer board of 1.98 x 3.94 inches (50.2 x 100.2 mm)
Uploaded: January 31, 2016
Shared: January 30, 2020
Total Price: $38.90

Solar tracker

Solar tracker

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Encoder with HW debounce

author: blauret
Top
Bottom

2 layer board of 1.11 x 1.16 inches (28.1 x 29.4 mm)
Uploaded: February 23, 2016
Shared: January 30, 2020
Total Price: $6.40

For ALPS STEC11b

For ALPS STEC11b

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

srxe.kicad_pcb

author: jkent
Top
Bottom

2 layer board of 1.90 x 0.40 inches (48.2 x 10.2 mm)
Uploaded: January 29, 2020
Shared: January 30, 2020
Total Price: $3.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chuck Breakout

author: BRIAN-lOUGH
Top
Bottom

2 layer board of 0.89 x 0.28 inches (22.5 x 7.0 mm)
Uploaded: January 30, 2020
Shared: January 30, 2020
Total Price: $1.20

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Meaty_3 _vPS03

author: ProjectStruix
Top
Bottom

2 layer board of 0.91 x 0.69 inches (23.1 x 17.5 mm)
Uploaded: January 29, 2020
Shared: January 29, 2020
Total Price: $3.10

Based on the Sparkfun Beefy-3 FTDI USB-Serial Port adapter. The V3 of the Meaty-3+ has an improved micro-USB socket and allows either RTS or CTS to be selected on the output pin header and has a high current regulator for more power hungry projects.

Details and files are located here: https:/…

Show full description

Based on the Sparkfun Beefy-3 FTDI USB-Serial Port adapter. The V3 of the Meaty-3+ has an improved micro-USB socket and allows either RTS or CTS to be selected on the output pin header and has a high current regulator for more power hungry projects.

Details and files are located here: https:/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HackGT Insight Wi-Fi / Display

author: petschekr
Top
Bottom

2 layer board of 2.47 x 1.46 inches (62.7 x 37.0 mm)
Uploaded: December 31, 2019
Shared: January 29, 2020
Total Price: $17.95

Daughterboard for the HackGT Insight NFC check-in board. Will allow organizers to see additional badge info and configure the check-in action.

Daughterboard for the HackGT Insight NFC check-in board. Will allow organizers to see additional badge info and configure the check-in action.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PM_Duplexer.kicad_pcb

author: scherer
Top
Bottom

2 layer board of 2.18 x 1.40 inches (55.4 x 35.5 mm)
Uploaded: January 28, 2020
Shared: January 28, 2020
Total Price: $15.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FTDI Friend v1.0

author: jwilly
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.8 x 30.5 mm)
Uploaded: January 28, 2020
Shared: January 28, 2020
Total Price: $4.20

Straight from Adafruit's github.

Straight from Adafruit's github.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PLCC52_RevA

author: jwilly
Top
Bottom

2 layer board of 1.85 x 1.55 inches (47.0 x 39.3 mm)
Uploaded: January 28, 2020
Shared: January 28, 2020
Total Price: $14.30

PLCC52 breakout and FTDI Friend programming for AT89C51-AC3 MCU via FLIP v2.4.6 on Win7.

PLCC52 breakout and FTDI Friend programming for AT89C51-AC3 MCU via FLIP v2.4.6 on Win7.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Qwiic LED Stick.kicad_pcb

author: MontanaOpenSource
Top
Bottom

2 layer board of 2.11 x 1.01 inches (53.6 x 25.6 mm)
Uploaded: December 05, 2019
Shared: January 28, 2020
Total Price: $10.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HM2040

author: AMSynths
Top
Bottom

2 layer board of 0.87 x 0.91 inches (22.0 x 23.0 mm)
Uploaded: January 28, 2020
Shared: January 28, 2020
Total Price: $3.90

Adapter PCB to mount HM2040 onto SSM2040 IC socket

Adapter PCB to mount HM2040 onto SSM2040 IC socket

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy