Shared Projects by stokessd

Shared Projects by stokessd

Quad ESL-63 High Voltage Board

Top
Bottom

2 layer board of 3.70 x 2.50 inches (94.0 x 63.5 mm)
Uploaded: October 23, 2024
Shared: October 24, 2024
Total Price: $46.25

This board is a clone of the Quad ESL-63 high voltage board. this generates the polarizing voltage for the panels and is a clone of the most recent circuit still used to this day on all the quad models.

This board is a clone of the Quad ESL-63 high voltage board. this generates the polarizing voltage for the panels and is a clone of the most recent circuit still used to this day on all the quad models.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Quad ESL-63 Zener Clamp Board

Top
Bottom

2 layer board of 3.20 x 3.00 inches (81.3 x 76.2 mm)
Uploaded: October 23, 2024
Shared: October 23, 2024
Total Price: $48.00

A Circuit board that provides a zener bidirectional clamp protection for the Quad ESL-63 electrostatic loudspeaker. This is a clone of the most recent ESL-63 board design and this circuit continues to be used in all quad models to this day.

A Circuit board that provides a zener bidirectional clamp protection for the Quad ESL-63 electrostatic loudspeaker. This is a clone of the most recent ESL-63 board design and this circuit continues to be used in all quad models to this day.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Quad ESL-63 Input/Clamp Board

Top
Bottom

2 layer board of 3.38 x 2.45 inches (85.8 x 62.2 mm)
Uploaded: October 23, 2024
Shared: October 23, 2024
Total Price: $41.35

A PCB to replace the RF clamp and input on the Quad ESL-63 electrostatic loudspeaker. This board is a clone of the most recent ESL-63 input board design. It also incorporates the input cap and resistor on the back side of the board along with a film bypass cap.

A PCB to replace the RF clamp and input on the Quad ESL-63 electrostatic loudspeaker. This board is a clone of the most recent ESL-63 input board design. It also incorporates the input cap and resistor on the back side of the board along with a film bypass cap.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HK Citation1 1-input RCA Board

Top
Bottom

2 layer board of 1.00 x 1.50 inches (25.4 x 38.1 mm)
Uploaded: August 24, 2024
Shared: August 24, 2024
Total Price: $7.50

PCB to replace the single RCA connector asembly on a Harman Kardon Citation 1 Preamp

PCB to replace the single RCA connector asembly on a Harman Kardon Citation 1 Preamp

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HK Citation1 4-input RCA Board

Top
Bottom

2 layer board of 1.00 x 2.50 inches (25.4 x 63.5 mm)
Uploaded: August 24, 2024
Shared: August 24, 2024
Total Price: $12.50

PCB to replace the RCA jack assemblies on a Harman Kardon Citation 1 Preamp

PCB to replace the RCA jack assemblies on a Harman Kardon Citation 1 Preamp

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy