rotarydial
author: Speccy-Mad
2 layer board of 1.37 x 1.20 inches (34.9 x 30.5 mm)
Uploaded:
November 13, 2021
Shared:
November 13, 2021
Total Price:
$8.20
From http://www.mattmillman.com/projects/building-your-own-pulse-to-tone-converter/
From http://www.mattmillman.com/projects/building-your-own-pulse-to-tone-converter/
WaterTempInterlockVer11.kicad_pcb
author: yifeibai
2 layer board of 6.13 x 5.68 inches (155.6 x 144.4 mm)
Uploaded:
November 12, 2021
Shared:
November 12, 2021
Total Price:
$174.10
Water interlock, updated AND gate pin connection changes.
Water interlock, updated AND gate pin connection changes.
Brake Blinker V1
author: wfdudley
2 layer board of 1.72 x 1.46 inches (43.6 x 37.0 mm)
Uploaded:
January 25, 2017
Shared:
November 12, 2021
Total Price:
$12.45
When brake applied, flash brake light a few times and then stay on.
When brake applied, flash brake light a few times and then stay on.
Headlight Modulator
author: wfdudley
2 layer board of 1.51 x 1.43 inches (38.3 x 36.4 mm)
Uploaded:
November 12, 2021
Shared:
November 12, 2021
Total Price:
$10.75
Headlight Modulator V 2 for use on 12V negative ground motorcycle in the United States. Requires low RdsOn mosfet (IRF4905 or similar) and Cadmium Sulfide resistive photocell. See: https://www.dudley.nu/projects/headlight_modulator
Headlight Modulator V 2 for use on 12V negative ground motorcycle in the United States. Requires low RdsOn mosfet (IRF4905 or similar) and Cadmium Sulfide resistive photocell. See: https://www.dudley.nu/projects/headlight_modulator
BM62Adapter.kicad_pcb
author: Hydroponics
2 layer board of 2.65 x 1.20 inches (67.3 x 30.5 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$15.85
BM62 Bluetooth adapter board
BM62 Bluetooth adapter board
DRO Sensor Jumper 2134 v1.0
author: DosMan
2 layer board of 0.36 x 0.25 inches (9.2 x 6.4 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$0.45
Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 2-1-3-4 jumper, which refers to the pin num…
Show full description
Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 2-1-3-4 jumper, which refers to the pin num…
Show full description
DRO Sensor Jumper 6724 v1.0
author: DosMan
2 layer board of 0.36 x 0.25 inches (9.2 x 6.4 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$0.45
Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 6-7-2-4 jumper, which refers to the pin num…
Show full description
Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 6-7-2-4 jumper, which refers to the pin num…
Show full description
Mini T3.2 - Miniaturization of Teensy 3.2 board
author: trainer4edu
2 layer board of 1.20 x 0.51 inches (30.5 x 13.0 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$3.05
Download SCH, BOM and assembly instructions at:
https://forum.pjrc.com/threads/68613-Mini-3-2-Made-Teensy-3-2-smaller-at-30-48mm-x-12-98mm
Download SCH, BOM and assembly instructions at:
https://forum.pjrc.com/threads/68613-Mini-3-2-Made-Teensy-3-2-smaller-at-30-48mm-x-12-98mm
Label sheet for Mini-T3.2 board, a small Teensy 3.2 compatible
author: trainer4edu
2 layer board of 1.20 x 0.51 inches (30.5 x 12.8 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$3.00
This board is designed as a label sheet for the Mini-T3.2, a small Teensy 3.2 compatible board. When you order this PCB, the PCB should be 0.8mm thick.
This board is designed as a label sheet for the Mini-T3.2, a small Teensy 3.2 compatible board. When you order this PCB, the PCB should be 0.8mm thick.
LED PCB for Conversion of IR Trail Camera to White Flash
author: wbwl2021
2 layer board of 3.11 x 2.19 inches (79.0 x 55.5 mm)
Uploaded:
November 10, 2021
Shared:
November 10, 2021
Total Price:
$33.95
There are many cases where we would like a color photo of primarily nocturnal animals. Unfortunately, there are few choices for mid-range commercial white flash trail cameras on the market. A full blown DSLR homebrew is one possibility, but has its own drawbacks. In this post, I describe how I co…
Show full description
There are many cases where we would like a color photo of primarily nocturnal animals. Unfortunately, there are few choices for mid-range commercial white flash trail cameras on the market. A full blown DSLR homebrew is one possibility, but has its own drawbacks. In this post, I describe how I co…
Show full description
canShield 1.0
author: danchouzhou
2 layer board of 0.75 x 0.95 inches (19.0 x 24.1 mm)
Uploaded:
October 15, 2021
Shared:
November 09, 2021
Total Price:
$3.55
CAN Transceiver shield for NuMaker-Volcano https://github.com/danchouzhou/canShield
CAN Transceiver shield for NuMaker-Volcano https://github.com/danchouzhou/canShield
eMMC ODROID connector flex extender
author: dls
2 layer board of 0.45 x 7.87 inches (11.5 x 200.0 mm)
Uploaded:
September 20, 2021
Shared:
November 09, 2021
Total Price:
$17.75
To be used with eMMC Module and eMMC Interposer
Order as FLEX PCB.
Show full description
To be used with eMMC Module and eMMC Interposer
Order as FLEX PCB.
Show full description
UART Connector backing board
author: dls
2 layer board of 0.45 x 0.34 inches (11.4 x 8.7 mm)
Uploaded:
September 20, 2021
Shared:
November 09, 2021
Total Price:
$0.75
For use with Flex extender
For use with Flex extender
eMMC Connector backing board
author: dls
2 layer board of 0.45 x 0.51 inches (11.5 x 13.0 mm)
Uploaded:
September 20, 2021
Shared:
November 09, 2021
Total Price:
$1.15
For use with Flex extender
For use with Flex extender
Genesis M1 Breakout 0603 Edition
author: MobiusStripTech
2 layer board of 0.45 x 0.28 inches (11.4 x 7.0 mm)
Uploaded:
January 07, 2021
Shared:
November 08, 2021
Total Price:
$0.60
This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
This uses 3x 0603 5.62kohm resistors and a 0603 10uf or 4.7uf decoupling capacitor. Order in flex. You will need to lift the RGB pins and then can slide this flex under them to isolate the signals. It also connects to 5v and Gnd to provide an easy decoupling cap install.
Genesis M1 miniDIN Mount
author: MobiusStripTech
2 layer board of 1.50 x 1.26 inches (38.1 x 32.0 mm)
Uploaded:
February 01, 2021
Shared:
November 08, 2021
Total Price:
$9.45
For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.
For use when installing a 9pin miniDIN in place of the RF modulator for RGB mods. Works great with the triple bypass mod. Order in 0.8mm for perfect fitment.
