Shared Projects by Tommy

Shared Projects by Tommy

STM32MP135 Dev Board (Rev A)

2 layer board of 4.17 x 2.76 inches (106.0 x 70.0 mm)
Uploaded: September 8th 2023
Shared: September 8th 2023
Total Price: $57.50

A development board for MYIR brand System-on-Module containing an STM32MP135.

A development board for MYIR brand System-on-Module containing an STM32MP135.

Embeddable link to order this shared Project

STM32MP151 Dev Board (Rev B)

2 layer board of 2.83 x 4.17 inches (72.0 x 106.0 mm)
Uploaded: June 4th 2023
Shared: June 4th 2023
Total Price: $59.10

A minimal Linux single-board-computer design using an STM32MP151 SoM (MYiR Tech). Build details, schematic, BoM, and KiCad files are available on GitHub.

A minimal Linux single-board-computer design using an STM32MP151 SoM (MYiR Tech). Build details, schematic, BoM, and KiCad files are available on GitHub.

Embeddable link to order this shared Project

Toshiba T1200 PSU (Rev 1.0)

2 layer board of 5.67 x 2.30 inches (144.0 x 58.5 mm)
Uploaded: April 19th 2022
Shared: April 19th 2022
Total Price: $65.30

Power supply replacement for the Toshiba T1200 laptop computer. This is revision 1.0. It has been tested and working with basic functionality (the computer boots). KiCad files and some more details are on GitHub.

Power supply replacement for the Toshiba T1200 laptop computer. This is revision 1.0. It has been tested and working with basic functionality (the computer boots). KiCad files and some more details are on GitHub.

Embeddable link to order this shared Project

H-Bridge Motor Controller

2 layer board of 2.17 x 1.42 inches (55.1 x 36.1 mm)
Uploaded: February 27th 2021
Shared: March 20th 2021
Total Price: $15.40

H-bridge motor controller designed for use with a PWM signal from Arduino or similar. This was designed to drive a model train set and switch direction of the loco.

  • I have used 4x RFD14N05 N-MOS FETs. (<https://www.digikey.com.au/product-detail/en/on-semiconductor/RFD14N05LSM9A/RFD14N05LSM9A…

Show full description

H-bridge motor controller designed for use with a PWM signal from Arduino or similar. This was designed to drive a model train set and switch direction of the loco.

  • I have used 4x RFD14N05 N-MOS FETs. (<https://www.digikey.com.au/product-detail/en/on-semiconductor/RFD14N05LSM9A/RFD14N05LSM9A…

Show full description

Embeddable link to order this shared Project