Shared Projects

Shared Projects

CC3000 Breakout

author: stottsc
Top
Bottom

4 layer board of 1.41 x 1.51 inches (35.7 x 38.4 mm)
Uploaded: July 14, 2013
Shared: August 16, 2013
Total Price: $21.20

4 layer CC3000 module breakout board with appropriate antenna microstrip. Uses ceramic antenna from TI example boards.

4 layer CC3000 module breakout board with appropriate antenna microstrip. Uses ceramic antenna from TI example boards.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RocketMega R2

author: Zortness
Top
Bottom

2 layer board of 4.01 x 2.12 inches (101.8 x 53.8 mm)
Uploaded: August 15, 2013
Shared: August 15, 2013
Total Price: $42.40

Arduino Mega/Due shield for rocketry

Arduino Mega/Due shield for rocketry

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wireless sensor node

author: tkircher
Top
Bottom

2 layer board of 2.09 x 2.89 inches (53.1 x 73.5 mm)
Uploaded: August 13, 2013
Shared: August 15, 2013
Total Price: $30.25

This is a wireless sensor node, designed around a Microchip PIC18F45J10 microcontroller and an MRF89XAM9A (915MHz) wireless module. As of April 2018, the three prototype modules have been operating continuously for four years. One of the modules is connected to a computer via serial interface to …

Show full description

This is a wireless sensor node, designed around a Microchip PIC18F45J10 microcontroller and an MRF89XAM9A (915MHz) wireless module. As of April 2018, the three prototype modules have been operating continuously for four years. One of the modules is connected to a computer via serial interface to …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BurnBabyBurn v1.0

author: johnboiles
Top
Bottom

2 layer board of 0.71 x 1.75 inches (18.0 x 44.4 mm)
Uploaded: August 14, 2013
Shared: August 14, 2013
Total Price: $6.15

Tiny board for controlling a high-power logic-level n-channel MOSFET transistor. Useful for burning stuff (like nichrome wire). BurnBabyBurn on GitHub

Tiny board for controlling a high-power logic-level n-channel MOSFET transistor. Useful for burning stuff (like nichrome wire). BurnBabyBurn on GitHub

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

produinoboy led board

author: alleybeachelectric
Top
Bottom

2 layer board of 1.05 x 0.36 inches (26.7 x 9.2 mm)
Uploaded: August 14, 2013
Shared: August 14, 2013
Total Price: $1.85

daughter board for produinoboy

daughter board for produinoboy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Binary Clock

author: magnet18
Top
Bottom

2 layer board of 4.02 x 1.02 inches (102.0 x 25.8 mm)
Uploaded: August 14, 2013
Shared: August 14, 2013
Total Price: $20.40

A 1"*4" binary clock

A 1"*4" binary clock

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cmoy Amp

author: alleybeachelectric
Top
Bottom

2 layer board of 1.02 x 2.02 inches (25.8 x 51.2 mm)
Uploaded: September 15, 2012
Shared: August 14, 2013
Total Price: $10.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8x8x8

author: alleybeachelectric
Top
Bottom

2 layer board of 3.94 x 3.36 inches (100.1 x 85.3 mm)
Uploaded: January 02, 2013
Shared: August 14, 2013
Total Price: $66.10

8x8x8 led cube

8x8x8 led cube

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB for RoboFest

author: IPART
Top
Bottom

2 layer board of 2.29 x 2.75 inches (58.1 x 69.8 mm)
Uploaded: August 14, 2013
Shared: August 14, 2013
Total Price: $31.45

PCB ROBOFEST

PCB ROBOFEST

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Citadel r1

author: jjveleber
Top
Bottom

2 layer board of 5.81 x 3.91 inches (147.5 x 99.2 mm)
Uploaded: August 14, 2013
Shared: August 14, 2013
Total Price: $113.40

DMX Lighting

DMX Lighting

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UsbVia [B1313]

author: jmedved
Top
Bottom

2 layer board of 1.27 x 0.79 inches (32.2 x 20.1 mm)
Uploaded: April 01, 2013
Shared: August 14, 2013
Total Price: $5.00

UsbVia is small board that exposes USB contacts to allow for easier multimeter measurements. There are four 2 mm connectors (two for current and two for voltage measurement) that allow for direct multimeter probe connection.

Details at [https://bitbucket.org/jmedved/usbvia/](https://bitbucket….

Show full description

UsbVia is small board that exposes USB contacts to allow for easier multimeter measurements. There are four 2 mm connectors (two for current and two for voltage measurement) that allow for direct multimeter probe connection.

Details at [https://bitbucket.org/jmedved/usbvia/](https://bitbucket….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UsbAmps [B1314]

author: jmedved
Top
Bottom

2 layer board of 2.13 x 0.91 inches (54.2 x 23.2 mm)
Uploaded: April 06, 2013
Shared: August 14, 2013
Total Price: $9.70

UsbAmps is a small USB pass-through device that measures current, voltage and power used by whatever is connected on its output.

Details at http://jmedved.com/usbamps/.

UsbAmps is a small USB pass-through device that measures current, voltage and power used by whatever is connected on its output.

Details at http://jmedved.com/usbamps/.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AgIR [C1323]

author: jmedved
Top
Bottom

2 layer board of 1.50 x 0.99 inches (38.2 x 25.2 mm)
Uploaded: June 07, 2013
Shared: August 14, 2013
Total Price: $7.40

This board uses FT232RL chip and it is direct replacement for one used in Agilen'ts USB to IR cable (U1173A).

Details at http://jmedved.com/agir/.

This board uses FT232RL chip and it is direct replacement for one used in Agilen'ts USB to IR cable (U1173A).

Details at http://jmedved.com/agir/.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Scotte/Woody Motor Adapter v.1.0

author: st0ff3r
Top
Bottom

2 layer board of 3.50 x 3.26 inches (88.8 x 82.8 mm)
Uploaded: August 13, 2013
Shared: August 13, 2013
Total Price: $57.00

Adapter for Scotte/Woody Pellet Controller http://www.nbe-shop.dk/product/version-6-styring-26/

Adapter for Scotte/Woody Pellet Controller http://www.nbe-shop.dk/product/version-6-styring-26/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GPS Speedo Adapter

author: Voltair
Top
Bottom

2 layer board of 2.69 x 0.60 inches (68.2 x 15.2 mm)
Uploaded: August 13, 2013
Shared: August 13, 2013
Total Price: $8.05

Adapt GP635 gps module to vdo electronic programmable speedometer

Adapt GP635 gps module to vdo electronic programmable speedometer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ol' Timey Bridge

author: rstraight
Top
Bottom

2 layer board of 3.38 x 1.96 inches (85.7 x 49.9 mm)
Uploaded: August 12, 2013
Shared: August 13, 2013
Total Price: $33.10

24 volt 5 amp dc motor drive

24 volt 5 amp dc motor drive

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breakouts

author: leewiseley
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.0 x 100.0 mm)
Uploaded: August 12, 2013
Shared: August 12, 2013
Total Price: $77.45

Breakout boards for TSSOP and SOIC

Breakout boards for TSSOP and SOIC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AC Dimmer Switch

author: prometa
Top
Bottom

2 layer board of 1.76 x 1.27 inches (44.8 x 32.3 mm)
Uploaded: August 12, 2013
Shared: August 12, 2013
Total Price: $11.15

Digital AC Dimmer

Digital AC Dimmer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sunjar v1.1

author: mattmanning
Top
Bottom

2 layer board of 1.49 x 1.20 inches (37.8 x 30.5 mm)
Uploaded: August 11, 2013
Shared: August 11, 2013
Total Price: $8.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

John Stone Monster Driver V5.1

author: sampojoe
Top
Bottom

2 layer board of 4.06 x 2.78 inches (103.2 x 70.5 mm)
Uploaded: June 27, 2013
Shared: August 11, 2013
Total Price: $56.35

Energetic Forum Asymmetric motor PWM is designed to drive an N. Tesla asymmetric motor up to 100Amps and withstand radiant energy pulsing within the system. It is a driver board and is specifically designed to take input from an Arduino programmable logic chip acting as a pulse width modulation …

Show full description

Energetic Forum Asymmetric motor PWM is designed to drive an N. Tesla asymmetric motor up to 100Amps and withstand radiant energy pulsing within the system. It is a driver board and is specifically designed to take input from an Arduino programmable logic chip acting as a pulse width modulation …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy