4-Fader MIDI Controller
author: theturtle32
2 layer board of 6.30 x 3.94 inches (160.0 x 100.0 mm)
Uploaded:
January 22, 2014
Shared:
March 31, 2014
Total Price:
$124.00
for Justin Burnett.
Note: the RX/TX lines on the FTDI connector are reversed on this board.
for Justin Burnett.
Note: the RX/TX lines on the FTDI connector are reversed on this board.
4-Fader MIDI Controller (Ext. Faders) v1.2
author: theturtle32
2 layer board of 1.50 x 2.40 inches (38.0 x 61.0 mm)
Uploaded:
February 03, 2014
Shared:
March 31, 2014
Total Price:
$17.95
For Justin Burnett
For Justin Burnett
Atmel (Arduino) virgin chip flasher
author: zorpat
2 layer board of 1.44 x 0.50 inches (36.5 x 12.7 mm)
Uploaded:
March 31, 2014
Shared:
March 31, 2014
Total Price:
$3.55
With this PCB you can flash TQFP and 8DIP virgin Atmel chips
With this PCB you can flash TQFP and 8DIP virgin Atmel chips
Traffic Light Shield
author: jmclean
2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded:
March 31, 2014
Shared:
March 31, 2014
Total Price:
$28.30
Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.
Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.
RocketLog
author: matthewkennedy
2 layer board of 0.64 x 1.22 inches (16.2 x 31.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$3.85
RocketLog
RocketLog
CREE XB 16mm star
author: Helios-
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16mm star
author: Helios-
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
Bluetooth Serial Adapter for OpenTrackers/TinyTrak
author: KC8UFV
2 layer board of 0.69 x 1.35 inches (17.4 x 34.3 mm)
Uploaded:
March 29, 2014
Shared:
March 29, 2014
Total Price:
$4.60
Uses generic HC04 or HC06 bluetooth adapter, MAX16910 & MAX3233. X1 is to bring out the 2nd serial port if your device supports it. A Female DB9 connector fits on one end of the board and the bluetooth adapter board hangs off the other end. This board was based off the reference schematic for the…
Show full description
Uses generic HC04 or HC06 bluetooth adapter, MAX16910 & MAX3233. X1 is to bring out the 2nd serial port if your device supports it. A Female DB9 connector fits on one end of the board and the bluetooth adapter board hangs off the other end. This board was based off the reference schematic for the…
Show full description
