Shared Projects

Shared Projects

8-Bit Shift Register

author: brodyf42

2 layer board of 0.85 x 0.90 inches (21.6 x 22.9 mm)
Uploaded: February 11th 2014
Shared: February 11th 2014
Total Price: $3.80

This is a chainable 8-Bit serial-in / parallel-out shift register based on the 74HC164 IC. Be aware that the reset is actve LOW.

This is a chainable 8-Bit serial-in / parallel-out shift register based on the 74HC164 IC. Be aware that the reset is actve LOW.

Embeddable link to order this shared Project

ATTiny XBee Connected I2C / Analog Sensor

author: chipmc

2 layer board of 2.35 x 1.25 inches (59.7 x 31.8 mm)
Uploaded: January 28th 2014
Shared: February 11th 2014
Total Price: $14.70

Tested - Works!

General Purpose I2C and Analog Wireless Sensor Board. This board supports an I2C and a Digital / Analog sensor connection and the ability to communicate readings using an XBee radio.

Tested - Works!

General Purpose I2C and Analog Wireless Sensor Board. This board supports an I2C and a Digital / Analog sensor connection and the ability to communicate readings using an XBee radio.

Embeddable link to order this shared Project

Alps 8-way joystick breakout board.

author: macona

2 layer board of 0.91 x 1.15 inches (23.0 x 29.2 mm)
Uploaded: February 11th 2014
Shared: February 11th 2014
Total Price: $5.20

Breakouts the Alps RKJXL100401V

Breakouts the Alps RKJXL100401V

Embeddable link to order this shared Project

Breadboard USB Port

author: brodyf42

2 layer board of 0.62 x 0.58 inches (15.8 x 14.8 mm)
Uploaded: February 11th 2014
Shared: February 11th 2014
Total Price: $1.80

Embeddable link to order this shared Project

Power Supply: AC Mains to Low Voltage DC

author: Eric

2 layer board of 1.63 x 2.30 inches (41.4 x 58.3 mm)
Uploaded: January 15th 2014
Shared: February 10th 2014
Total Price: $18.70

Cost: $18.70 for three.

Description:

I needed a low voltage, low current DC power supply for a mains-powered project but I was out of spare wall warts, so I whipped this together and it does the job nicely.

Holes along the edges of the board are sized for [M3 x 4mm stando…

Show full description

Cost: $18.70 for three.

Description:

I needed a low voltage, low current DC power supply for a mains-powered project but I was out of spare wall warts, so I whipped this together and it does the job nicely.

Holes along the edges of the board are sized for [M3 x 4mm stando…

Show full description

Embeddable link to order this shared Project

CRAMPS V1.0

author: cdsteinkuehler

2 layer board of 3.92 x 4.02 inches (99.4 x 102.0 mm)
Uploaded: February 10th 2014
Shared: February 10th 2014
Total Price: $78.55

3D printing cape for the BeagleBone, based on the RAMPS-FD design for the Due. Details Source Files

3D printing cape for the BeagleBone, based on the RAMPS-FD design for the Due. Details Source Files

Embeddable link to order this shared Project

RS232 for Electric Imp BreakOut Board

author: ljbeng

2 layer board of 1.19 x 1.26 inches (30.2 x 32.0 mm)
Uploaded: February 9th 2014
Shared: February 10th 2014
Total Price: $7.50

This will solder directly to the SparkFun Electric Imp breakout https://www.sparkfun.com/products/11400 and adds RS232 Serial voltage levels to the Imp. Power and serial are all through an RJ12 6 pin connector. 1-GND, 2-+5V, 3-Tx232, 4-Rx232. Uses Uart57 on Imp. Chip is Max3232 http://www….

Show full description

This will solder directly to the SparkFun Electric Imp breakout https://www.sparkfun.com/products/11400 and adds RS232 Serial voltage levels to the Imp. Power and serial are all through an RJ12 6 pin connector. 1-GND, 2-+5V, 3-Tx232, 4-Rx232. Uses Uart57 on Imp. Chip is Max3232 http://www….

Show full description

Embeddable link to order this shared Project

ECE3440 I/O Expansion Board (Rev4)

author: Erikku

2 layer board of 1.98 x 1.98 inches (50.3 x 50.3 mm)
Uploaded: February 10th 2014
Shared: February 10th 2014
Total Price: $19.55

ECE3440 I/O Expansion Board (Rev4)

ECE3440 I/O Expansion Board (Rev4)

Embeddable link to order this shared Project

Charlie Heart

author: rmd6502

2 layer board of 1.86 x 2.29 inches (47.1 x 58.1 mm)
Uploaded: February 10th 2014
Shared: February 10th 2014
Total Price: $21.20

Rev 2.3

Rev 2.3

Embeddable link to order this shared Project

MAX21100 V3 Breakout

author: SpaceCoaster

2 layer board of 0.61 x 0.61 inches (15.6 x 15.6 mm)
Uploaded: February 9th 2014
Shared: February 9th 2014
Total Price: $1.85

Breakout board for MAX21100 a low-power, ultra-accurate 6+3 DoF IMU from Maxim Integrated.

Eagle files can be found at Github.

Breakout board for MAX21100 a low-power, ultra-accurate 6+3 DoF IMU from Maxim Integrated.

Eagle files can be found at Github.

Embeddable link to order this shared Project

Type 5 Comparator

author: tricorderproject

2 layer board of 1.58 x 0.78 inches (40.0 x 19.8 mm)
Uploaded: February 9th 2014
Shared: February 9th 2014
Total Price: $6.10

External comparator for Radiation Watch Type 5 Detector

External comparator for Radiation Watch Type 5 Detector

Embeddable link to order this shared Project

WiiCopter

author: dwhacks

2 layer board of 1.18 x 1.18 inches (30.0 x 30.0 mm)
Uploaded: February 9th 2014
Shared: February 9th 2014
Total Price: $6.95

DW brushed multiwii

DW brushed multiwii

Embeddable link to order this shared Project

Spark Core Programmer Shield

author: robertdolca

2 layer board of 2.50 x 1.55 inches (63.5 x 39.4 mm)
Uploaded: February 9th 2014
Shared: February 9th 2014
Total Price: $19.35

Embeddable link to order this shared Project

BITX Amplifier Block

author: roamingryan

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: February 9th 2014
Shared: February 9th 2014
Total Price: $5.00

General purpose bidirectional amplifier

General purpose bidirectional amplifier

Embeddable link to order this shared Project

iologic cpu v2

author: suby

2 layer board of 4.00 x 4.19 inches (101.6 x 106.4 mm)
Uploaded: November 11th 2013
Shared: February 8th 2014
Total Price: $83.75

cpu atmega1284p

cpu atmega1284p

Embeddable link to order this shared Project

Robotic Arm Servo Controller

author: Josh-Jetter

2 layer board of 2.32 x 1.92 inches (58.8 x 48.7 mm)
Uploaded: February 8th 2014
Shared: February 8th 2014
Total Price: $22.15

Servo mechanism controller for a brushed DC motor

Servo mechanism controller for a brushed DC motor

Embeddable link to order this shared Project

NEC RGB

author: Akira76

2 layer board of 1.13 x 0.50 inches (28.6 x 12.7 mm)
Uploaded: February 8th 2014
Shared: February 8th 2014
Total Price: $2.80

NEC RGB

NEC RGB

Embeddable link to order this shared Project

Left Side Booster V1.1

author: Xenocoder

2 layer board of 2.01 x 1.08 inches (51.1 x 27.3 mm)
Uploaded: December 9th 2013
Shared: February 8th 2014
Total Price: $10.80

Left Side Booster for Double Boost Version 1.1

Left Side Booster for Double Boost Version 1.1

Embeddable link to order this shared Project

18V Charge Pump V1.1

author: Xenocoder

2 layer board of 0.99 x 0.93 inches (25.1 x 23.5 mm)
Uploaded: November 24th 2013
Shared: February 8th 2014
Total Price: $4.55

Version 1.1 of the 9V to 18V Charge board

Version 1.1 of the 9V to 18V Charge board

Embeddable link to order this shared Project

ATxmega*E5 DevDIP

2 layer board of 0.72 x 1.51 inches (18.3 x 38.2 mm)
Uploaded: August 23rd 2013
Shared: February 8th 2014
Total Price: $5.40

AVR Xmega E5 series breakout with PDI and 3.3v regulator

AVR Xmega E5 series breakout with PDI and 3.3v regulator

Embeddable link to order this shared Project