ATMega16M1 Breakout
author: redfern314
2 layer board of 0.71 x 1.62 inches (18.1 x 41.0 mm)
Uploaded:
September 30, 2014
Shared:
January 29, 2015
Total Price:
$5.75
v1 - 9/29/14
v1 - 9/29/14
Morseduino Controller Board
author: BarnacleBudd
2 layer board of 1.71 x 1.20 inches (43.3 x 30.5 mm)
Uploaded:
July 01, 2014
Shared:
January 28, 2015
Total Price:
$10.20
Used to connect the rotary encoder to the cw decoder board. Recommend you look at the Morseduino 2 version which uses two push buttons instead of the encoder.
Used to connect the rotary encoder to the cw decoder board. Recommend you look at the Morseduino 2 version which uses two push buttons instead of the encoder.
Retrode Virtual Boy to Sega Genesis Adapter v1.0
author: Helder
2 layer board of 3.30 x 1.60 inches (83.8 x 40.7 mm)
Uploaded:
January 25, 2015
Shared:
January 28, 2015
Total Price:
$26.40
Allows you to rip Virtual Boy games on the Retrode using the Sega Genesis Cart Slot, Virtual Boy cart is inserted with label facing back of Genesis cart. Use 2mm spacing angled headers.
Allows you to rip Virtual Boy games on the Retrode using the Sega Genesis Cart Slot, Virtual Boy cart is inserted with label facing back of Genesis cart. Use 2mm spacing angled headers.
3V3 ADJ TINPS (604)
author: erat
2 layer board of 1.44 x 0.65 inches (36.5 x 16.5 mm)
Uploaded:
December 09, 2014
Shared:
January 27, 2015
Total Price:
$4.65
Mint tin power supply board w/ MAX604 (https://github.com/modalpdx/MintTinPS_604)
Mint tin power supply board w/ MAX604 (https://github.com/modalpdx/MintTinPS_604)
CK's_BOOST_v02
author: Cereal_Killer
2 layer board of 0.59 x 0.59 inches (15.0 x 15.0 mm)
Uploaded:
January 27, 2015
Shared:
January 27, 2015
Total Price:
$1.70
LM3410 based boost driver 2.4-5v with ATTiny13A. Note extra low power applications should use the low power version (the Attiny13V). Max current will not be reached from only 2xNiMH (2.4v)! DO NOT ORDER, NOT READY
LM3410 based boost driver 2.4-5v with ATTiny13A. Note extra low power applications should use the low power version (the Attiny13V). Max current will not be reached from only 2xNiMH (2.4v)! DO NOT ORDER, NOT READY
Multi Function adapter
author: jimgrina
2 layer board of 3.24 x 1.60 inches (82.2 x 40.6 mm)
Uploaded:
January 26, 2015
Shared:
January 26, 2015
Total Price:
$25.85
Two part adapter that connects HC-05/06 bluetooth modules to Arduino
Two part adapter that connects HC-05/06 bluetooth modules to Arduino
7-segment LED strip driver
author: tkbletsc
2 layer board of 1.74 x 2.30 inches (44.2 x 58.4 mm)
Uploaded:
January 26, 2015
Shared:
January 26, 2015
Total Price:
$19.95
For use with an ATMEGA328P and two ULN2003A darlington arrays. Drives up to 14 short lengths of LED strip, presumably to form a two-digit seven-segment display.
For use with an ATMEGA328P and two ULN2003A darlington arrays. Drives up to 14 short lengths of LED strip, presumably to form a two-digit seven-segment display.
keypad board
author: TorontoBuilder
2 layer board of 1.59 x 1.50 inches (40.3 x 38.1 mm)
Uploaded:
January 26, 2015
Shared:
January 26, 2015
Total Price:
$11.90
Arduino indexing controller keypad
Arduino indexing controller keypad
ATtiny uB-v1.4
author: epaul
2 layer board of 0.80 x 0.95 inches (20.2 x 24.0 mm)
Uploaded:
January 25, 2015
Shared:
January 25, 2015
Total Price:
$3.75
ATtiny13/25 with power, ISP and headears.
- Q1 can be NPN or PNP or logic level MOSFET N or P by proper selection on J1 solder jumper.
- Qty Value Device Package Parts
1 SOLDERJUMPER_2WAYS SJ_3 J1
2 .1u C-EUC0805K C0805K C1, C3
2 10k R-EU_R0603 R0603 R3, R4
1 10u CPO…
Show full description
ATtiny13/25 with power, ISP and headears.
- Q1 can be NPN or PNP or logic level MOSFET N or P by proper selection on J1 solder jumper.
- Qty Value Device Package Parts
1 SOLDERJUMPER_2WAYS SJ_3 J1
2 .1u C-EUC0805K C0805K C1, C3
2 10k R-EU_R0603 R0603 R3, R4
1 10u CPO…
Show full description
[untested] [wip] 22mm DD + single 7135 v013
author: Red
2 layer board of 0.87 x 0.87 inches (22.0 x 22.0 mm)
Uploaded:
January 25, 2015
Shared:
January 25, 2015
Total Price:
$3.75
Forum thread: http://budgetlightforum.com/node/37231
Forum thread: http://budgetlightforum.com/node/37231
currentmeter
author: Kingswood
2 layer board of 1.36 x 1.36 inches (34.4 x 34.4 mm)
Uploaded:
January 04, 2015
Shared:
January 24, 2015
Total Price:
$9.15
Microamp current meter
The board has space for a CR2032 battery on the bottom, and is designed to fit in a Hammond 1551P case, 40x40x20mm.
Microamp current meter
The board has space for a CR2032 battery on the bottom, and is designed to fit in a Hammond 1551P case, 40x40x20mm.
BU_CK-17AVR_v04
author: Cereal_Killer
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
January 24, 2015
Shared:
January 24, 2015
Total Price:
$2.25
Max16820 based buck driver, 8.4-24v in, LED voltage can be up to vin - 1.5 (overhead).
Max16820 based buck driver, 8.4-24v in, LED voltage can be up to vin - 1.5 (overhead).
Cx6_daughter_v04
author: Cereal_Killer
2 layer board of 0.75 x 0.71 inches (19.1 x 18.1 mm)
Uploaded:
January 17, 2015
Shared:
January 24, 2015
Total Price:
$2.65
Cx6_main_v03
author: Cereal_Killer
2 layer board of 1.00 x 0.94 inches (25.4 x 23.8 mm)
Uploaded:
January 17, 2015
Shared:
January 24, 2015
Total Price:
$4.65
FFC 10 breakout
author: nsayer
2 layer board of 0.50 x 1.10 inches (12.7 x 27.9 mm)
Uploaded:
January 24, 2015
Shared:
January 24, 2015
Total Price:
$2.75
For OpenEVSE / Hydra debug and dev.
Ironically, this design was created, uploaded and ordered during a power failure.
For OpenEVSE / Hydra debug and dev.
Ironically, this design was created, uploaded and ordered during a power failure.
