IR Remote + Temp + Light Sensor (ESP based) - 0.4 alpha
2 layer board of 2.06 x 1.18 inches (52.2 x 30.0 mm)
Uploaded:
April 06, 2017
Shared:
April 06, 2017
Total Price:
$12.10
Changes: Added Micro USB for power
Designed with mqtt and homie in mind.
see This link
very little code written for it yet
Changes: Added Micro USB for power
Designed with mqtt and homie in mind.
see This link
very little code written for it yet
IR Remote + Temp + Light Sensor (ESP based) - 0.1 alpha
2 layer board of 2.70 x 1.27 inches (68.7 x 32.2 mm)
Uploaded:
March 12, 2017
Shared:
March 12, 2017
Total Price:
$17.10
ESP8266, WS2813/2 v0.5
2 layer board of 1.27 x 0.48 inches (32.2 x 12.2 mm)
Uploaded:
February 10, 2017
Shared:
February 10, 2017
Total Price:
$3.00
v0.5 changes the tant cap pads.
V0.3 adds a UART header (also be used for a reset pin for homie)
Designed as a small daughter board for an ESP-01 to control a led strip, includes space for a 1000uf cap for the lights.
See <https://github.com/takigama/HomeAutomationExperiments>
Big cap…
Show full description
v0.5 changes the tant cap pads.
V0.3 adds a UART header (also be used for a reset pin for homie)
Designed as a small daughter board for an ESP-01 to control a led strip, includes space for a 1000uf cap for the lights.
See <https://github.com/takigama/HomeAutomationExperiments>
Big cap…
Show full description
ESP8266, WS2813/2 v0.3
2 layer board of 1.27 x 0.48 inches (32.2 x 12.2 mm)
Uploaded:
January 26, 2017
Shared:
January 26, 2017
Total Price:
$3.00
V0.3 adds a UART header (also be used for a reset pin for homie)
Designed as a small daughter board for an ESP-01 to control a led strip, includes space for a 1000uf cap for the lights.
See <https://github.com/takigama/HomeAutomationExperiments>
Big cap goes on the underside of the board…
Show full description
V0.3 adds a UART header (also be used for a reset pin for homie)
Designed as a small daughter board for an ESP-01 to control a led strip, includes space for a 1000uf cap for the lights.
See <https://github.com/takigama/HomeAutomationExperiments>
Big cap goes on the underside of the board…
Show full description
Takiuino V3.2
2 layer board of 1.83 x 0.83 inches (46.4 x 21.0 mm)
Uploaded:
March 08, 2015
Shared:
March 08, 2015
Total Price:
$7.50
Takiuino V3.2 is just v3.1 with an updated pin layout and the reset switch moved so its not butting right up against the resonator. This board should be easier to build then the 3.1 version. However, either layout is valid, so if your after a specific version you can build either.
The code is …
Show full description
Takiuino V3.2 is just v3.1 with an updated pin layout and the reset switch moved so its not butting right up against the resonator. This board should be easier to build then the 3.1 version. However, either layout is valid, so if your after a specific version you can build either.
The code is …
Show full description
