Shared Projects by tupoar

Version 1.2 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.

Changelog:

Rev 3:

• Added pads for alternative OLED screen

Rev 2:

• Fixed missing track on RSSI_A

Rev 1:

• Added IR Emitter
• Added SPI port

Details can be found on

RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752

and Github:

https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md

https://github.com/RCDaddy/T-Box

Version 1.1 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.

Changelog:

Rev 2: Fixed missing track between RSSI_A and PIN 25

Rev 1: Initial version. Replaced Pro Mini with Atmega328p.

Details can be found on

RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752

and Github:

https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md

https://github.com/RCDaddy/T-Box

Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.

Changelog:

Rev 4:

• Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.

• More Pro Mini pin corrections

Rev 3.1:

• Minor adjustments to routing

• Minor changes to 100k pull down resistors.

Rev 3:

• Fixed hole spacing for Pro Mini

• Fixed DTR, TX, RX etc ports as they were reversed

• Swapped Up and Down Buttons.

• Added 100K pull down resistors on RSSI lines

• Added extra ground and vcc points for pro mini

• Corrected A5 and A4 conenctions

Rev 2:

• Repositioned via holes

Rev 1:

• Initial version

Details can be found on

RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752

and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md https://github.com/RCDaddy/T-Box

Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.

Changelog:

Rev 4:

• Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.

Rev 3.1:

• Minor adjustments to routing

• Minor changes to 100k pull down resistors.

Rev 3:

• Fixed hole spacing for Pro Mini

• Fixed DTR, TX, RX etc ports as they were reversed

• Swapped Up and Down Buttons.

• Added 100K pull down resistors on RSSI lines

• Added extra ground and vcc points for pro mini

• Corrected A5 and A4 conenctions

Rev 2:

• Repositioned via holes

Rev 1:

• Initial version

Details can be found on

RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752

and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md

This is not my work!