Shared Projects

Shared Projects

WS2812B breakout

author: HighInBC
Top
Bottom

2 layer board of 0.62 x 0.34 inches (15.7 x 8.5 mm)
Uploaded: October 09, 2015
Shared: October 11, 2015
Total Price: $1.00

With optional 0802 cap. Board will pass through VCC and GND even if LED is absent or damaged.

BOM:

  • 1 x 0802 100nf capacitor
  • 1 x 5050 WS2812B RGB LED
  • 2 x 1x3 male pin header

With optional 0802 cap. Board will pass through VCC and GND even if LED is absent or damaged.

BOM:

  • 1 x 0802 100nf capacitor
  • 1 x 5050 WS2812B RGB LED
  • 2 x 1x3 male pin header
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EM7180MPU6500HMC5983MS5637.v01a

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded: October 11, 2015
Shared: October 11, 2015
Total Price: $3.50

Sensor fusion test board to gauge perfromance of the HMC5983 magnetometer for improved heading accuray. Improved layout.

Sensor fusion test board to gauge perfromance of the HMC5983 magnetometer for improved heading accuray. Improved layout.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

miniSam

author: ALKR
Top
Bottom

2 layer board of 0.98 x 0.98 inches (24.9 x 24.9 mm)
Uploaded: October 11, 2015
Shared: October 11, 2015
Total Price: $4.80

…

…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tiny7_rev2.1

author: ALKR
Top
Bottom

2 layer board of 0.55 x 0.94 inches (14.0 x 23.8 mm)
Uploaded: October 11, 2015
Shared: October 11, 2015
Total Price: $2.55

…

…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Retro LED v1

author: jvanier
Top
Bottom

2 layer board of 1.33 x 0.86 inches (33.7 x 21.7 mm)
Uploaded: June 09, 2015
Shared: October 11, 2015
Total Price: $5.65

Old school LED display with driver

Old school LED display with driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATmega328 Development Board

author: METRronics
Top
Bottom

2 layer board of 0.92 x 2.19 inches (23.4 x 55.6 mm)
Uploaded: October 01, 2015
Shared: October 11, 2015
Total Price: $10.05

A ISP programming board for the ATmega328 & ATmega328P

A ISP programming board for the ATmega328 & ATmega328P

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hacker Badge

author: tdfischer
Top
Bottom

2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded: May 26, 2015
Shared: October 11, 2015
Total Price: $7.90

A badge for hackers to learn how to solder kits together!

A badge for hackers to learn how to solder kits together!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

i2cHub_v0.1_06222015

author: Dan
Top
Bottom

2 layer board of 2.56 x 2.23 inches (65.0 x 56.5 mm)
Uploaded: June 23, 2015
Shared: October 11, 2015
Total Price: $28.50

I2C Hub for led control

I2C Hub for led control

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Vr Conditioner

author: Ebinkerd
Top
Bottom

2 layer board of 2.09 x 1.10 inches (53.0 x 27.9 mm)
Uploaded: July 09, 2015
Shared: October 11, 2015
Total Price: $11.45

Max9926 VR Interface

Max9926 VR Interface

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WF-KNT-PGMR

author: wfang2002
Top
Bottom

2 layer board of 1.38 x 1.58 inches (35.0 x 40.0 mm)
Uploaded: October 10, 2015
Shared: October 10, 2015
Total Price: $10.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

20mm FET + 1 driver for X6R

author: pyro1son
Top
Bottom

2 layer board of 0.78 x 0.78 inches (19.9 x 19.9 mm)
Uploaded: October 10, 2015
Shared: October 10, 2015
Total Price: $3.05

dual channel for dual LED output

dual channel for dual LED output

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Zener Noise Generator

author: jhol
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: October 10, 2015
Shared: October 10, 2015
Total Price: $5.00

A wide-band noise generator

A wide-band noise generator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Triple PMOD Dual Plugin v1.1

author: apertus
Top
Bottom

4 layer board of 0.83 x 2.24 inches (21.1 x 57.0 mm)
Uploaded: May 02, 2015
Shared: October 10, 2015
Total Price: $18.60

Triple PMOD Dual Slot Plugin Module v1.1

Triple PMOD Dual Slot Plugin Module v1.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1xHDMI Plugin Module v0.6

author: apertus
Top
Bottom

4 layer board of 1.21 x 1.12 inches (30.7 x 28.4 mm)
Uploaded: September 28, 2015
Shared: October 10, 2015
Total Price: $13.40

1xHDMI Single Plugin Module v0.6

1xHDMI Single Plugin Module v0.6

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 3.2 DIY Reference Board

author: PaulStoffregen
Top
Bottom

4 layer board of 2.80 x 1.00 inches (71.2 x 25.5 mm)
Uploaded: September 05, 2015
Shared: October 10, 2015
Total Price: $28.10

For testing the MKL04 chip used on DIY Teensy boards…

TODO: Bill of Materials

For testing the MKL04 chip used on DIY Teensy boards…

TODO: Bill of Materials

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Test1

author: Keith
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.7 x 25.7 mm)
Uploaded: March 28, 2014
Shared: October 09, 2015
Total Price: $5.10

Voltage Monitor. Lights LED D1 if voltage exceeds threshold set by R3 and R4. Uses TO-92 TL431.

Voltage Monitor. Lights LED D1 if voltage exceeds threshold set by R3 and R4. Uses TO-92 TL431.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bat Led R0

author: MakersBox
Top
Bottom

2 layer board of 1.00 x 1.35 inches (25.5 x 34.4 mm)
Uploaded: November 23, 2014
Shared: October 09, 2015
Total Price: $6.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

loupiottes-v2-oh

author: tzim
Top
Bottom

2 layer board of 2.33 x 1.78 inches (59.3 x 45.3 mm)
Uploaded: October 09, 2015
Shared: October 09, 2015
Total Price: $20.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cameron Tech Offroad CPU v1.1.0

author: cannikin
Top
Bottom

2 layer board of 3.11 x 1.01 inches (78.9 x 25.6 mm)
Uploaded: February 26, 2015
Shared: October 09, 2015
Total Price: $15.65

http://camte.ch/offroad-cpu

http://camte.ch/offroad-cpu

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Particle Photon, Electron and Spark Core JTAG Shield Debugger

author: Technobly
Top
Bottom

2 layer board of 1.00 x 1.65 inches (25.4 x 41.9 mm)
Uploaded: October 09, 2015
Shared: October 09, 2015
Total Price: $8.25

Particle Photon, Electron and Spark Core JTAG Shield Debugger

Particle Photon, Electron and Spark Core JTAG Shield Debugger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy