MKL27Z*VLH4 breakout
author: flabbergast
2 layer board of 1.21 x 0.81 inches (30.7 x 20.6 mm)
Uploaded:
October 05, 2015
Shared:
October 19, 2015
Total Price:
$4.90
A small breakout board for Freescale KL27Z chips that come in LQFP64 package. Just USB (mini or micro), reset button, NMI button, one LED and minimal passive components.
WARNING: This breakout is for MKL27Z128VLH4 and MKL27Z256VLH4 chips. Do not use MKL27Z32VLH4 or MKL27Z64VLH4 chips on it…
Show full description
A small breakout board for Freescale KL27Z chips that come in LQFP64 package. Just USB (mini or micro), reset button, NMI button, one LED and minimal passive components.
WARNING: This breakout is for MKL27Z128VLH4 and MKL27Z256VLH4 chips. Do not use MKL27Z32VLH4 or MKL27Z64VLH4 chips on it…
Show full description
Atomic Robo-Kid CPU block
author: system11
2 layer board of 1.07 x 2.59 inches (27.1 x 65.8 mm)
Uploaded:
October 19, 2015
Shared:
October 19, 2015
Total Price:
$13.80
Replacement for custom CPU block. Requires 6mhz or better Z80 and 82S129 PROM programmed with the block data (should be in MAME set shortly)
Replacement for custom CPU block. Requires 6mhz or better Z80 and 82S129 PROM programmed with the block data (should be in MAME set shortly)
ESP8266TeensyAddOn.v05
author: PeskyProducts
2 layer board of 0.71 x 0.86 inches (18.0 x 21.7 mm)
Uploaded:
October 19, 2015
Shared:
October 19, 2015
Total Price:
$3.00
Small Teensy add-on board with all pins broken out. Added pullup to GPIO2 and changed antenna design.
Small Teensy add-on board with all pins broken out. Added pullup to GPIO2 and changed antenna design.
Arduino_8i_8o
author: Piafhelec
2 layer board of 2.70 x 2.10 inches (68.6 x 53.4 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$28.35
8-input (switches with pulldown resistors) + 8-output (open collectors) shield for arduino. Schematics, layout & BoM
8-input (switches with pulldown resistors) + 8-output (open collectors) shield for arduino. Schematics, layout & BoM
Nixie IN-12 board
author: diycrap
2 layer board of 3.59 x 2.65 inches (91.1 x 67.3 mm)
Uploaded:
September 12, 2015
Shared:
October 18, 2015
Total Price:
$47.50
Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.
Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.
FigTroniX - Antenna Tuner Ver 2 - KD5VMF
author: KD5VMF
2 layer board of 2.51 x 1.01 inches (63.6 x 25.6 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$12.60
ESP8266 Breakout v3.0B - SPX3819 - Mini
author: 8n1
2 layer board of 0.96 x 1.21 inches (24.3 x 30.6 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$5.75
untested (not yet in production)
ESP-07 & ESP-12 Breakout Adapter with on-board voltage regulator - Version 3.0B
Used LDO: SPX3819 (Vin=3.7-16V, Dropout=340mV(-550mV), Iq=90µA)
Eagle files, Pictures, Schematic, Partlist(BOM)
https://github.com/8n1/ESP8266-Breakout-Adapter
untested (not yet in production)
ESP-07 & ESP-12 Breakout Adapter with on-board voltage regulator - Version 3.0B
Used LDO: SPX3819 (Vin=3.7-16V, Dropout=340mV(-550mV), Iq=90µA)
Eagle files, Pictures, Schematic, Partlist(BOM)
https://github.com/8n1/ESP8266-Breakout-Adapter
ESP8266 Breakout v3.0A - AS1363 - Mini
author: 8n1
2 layer board of 0.96 x 1.21 inches (24.3 x 30.6 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$5.75
untested (not yet in production)
ESP-07 & ESP-12 Breakout Adapter with on-board voltage regulator - Version 3.0A
Used LDO: AS1363 (Vin=3.5-5.5V, Dropout=150mV(-320mV), Iq=40µA)
Eagle files, Pictures, Schematic, Partlist(BOM)
https://github.com/8n1/ESP8266-Breakout-Adapter
untested (not yet in production)
ESP-07 & ESP-12 Breakout Adapter with on-board voltage regulator - Version 3.0A
Used LDO: AS1363 (Vin=3.5-5.5V, Dropout=150mV(-320mV), Iq=40µA)
Eagle files, Pictures, Schematic, Partlist(BOM)
https://github.com/8n1/ESP8266-Breakout-Adapter
LGA-28 Breakout Board-v2
author: mtDSolutions
2 layer board of 0.51 x 1.47 inches (13.0 x 37.3 mm)
Uploaded:
October 14, 2015
Shared:
October 18, 2015
Total Price:
$3.70
LGA-28 Breakout Board-v2
LGA-28 Breakout Board-v2
ESP8266TeensyAddOn.v04
author: PeskyProducts
2 layer board of 0.71 x 0.86 inches (18.0 x 21.7 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$3.00
Teensy add-on board for the ESP8266 with all pins broken out to headers. Replaced TLV73333 300 mA regulator with MIC5528 500 mA LDO, pulled up RX and connected indicator led cathode to TX.
Teensy add-on board for the ESP8266 with all pins broken out to headers. Replaced TLV73333 300 mA regulator with MIC5528 500 mA LDO, pulled up RX and connected indicator led cathode to TX.
LDO SCR
author: MikeNE5U
2 layer board of 3.00 x 3.59 inches (76.2 x 91.1 mm)
Uploaded:
October 02, 2015
Shared:
October 18, 2015
Total Price:
$53.80
Low Dropout Solar Charge Controller. All thru-hole parts. Parts list and Eagle schematic and board files can be made available. Easy to build. Tested. I have the same circuit with SMD's that is about ½ the cost of this one due to a smaller board. If it tests fine I will share it.
Low Dropout Solar Charge Controller. All thru-hole parts. Parts list and Eagle schematic and board files can be made available. Easy to build. Tested. I have the same circuit with SMD's that is about ½ the cost of this one due to a smaller board. If it tests fine I will share it.
Nanospider.UART.v04a
author: PeskyProducts
4 layer board of 0.71 x 0.71 inches (17.9 x 17.9 mm)
Uploaded:
October 18, 2015
Shared:
October 18, 2015
Total Price:
$4.90
Origin's 4400 Nano Spider GPS module in a small breakout board for easy mounting on a Teensy 3.1. Reduced board size, added ceramic antenna and transistors to drive the leds. Replaced button with side-mount on/off switch.
Origin's 4400 Nano Spider GPS module in a small breakout board for easy mounting on a Teensy 3.1. Reduced board size, added ceramic antenna and transistors to drive the leds. Replaced button with side-mount on/off switch.
STM32L4LQFP64.v01
author: PeskyProducts
4 layer board of 0.71 x 1.41 inches (17.9 x 35.7 mm)
Uploaded:
October 17, 2015
Shared:
October 17, 2015
Total Price:
$9.90
Reference design for STM32L476 80 MHz ARM Cortex M4 with FPU in small breakout board with enough pins broken out to be useful.
Reference design for STM32L476 80 MHz ARM Cortex M4 with FPU in small breakout board with enough pins broken out to be useful.
