Shared Projects

Shared Projects

Dragonfly.v03c

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.41 inches (17.9 x 35.7 mm)
Uploaded: March 28, 2016
Shared: March 28, 2016
Total Price: $9.90

Ultra-low power STM32L476 breakout board with 16 Mbyte QSPI flash, rgb led, 500 nA Iq 3V3 LDO. Added 22 Ohm resistors and TVS diode protection onto D-/D+ lines.

Ultra-low power STM32L476 breakout board with 16 Mbyte QSPI flash, rgb led, 500 nA Iq 3V3 LDO. Added 22 Ohm resistors and TVS diode protection onto D-/D+ lines.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Kenwood TS-950SDX DDS module

author: noisetube
Top
Bottom

2 layer board of 1.97 x 0.79 inches (50.1 x 20.1 mm)
Uploaded: March 27, 2016
Shared: March 27, 2016
Total Price: $7.80

This module is designed to act as a replacement for the obsolete F71022 DDS chips in the Kenwood TS-950SDX transceiver.

Software, documentation and full board design are available at the following location:

[http://people.freebsd.org/~wpaul/w00t/kenwood_dds.zip](http://people.freebsd.org/~w…

Show full description

This module is designed to act as a replacement for the obsolete F71022 DDS chips in the Kenwood TS-950SDX transceiver.

Software, documentation and full board design are available at the following location:

[http://people.freebsd.org/~wpaul/w00t/kenwood_dds.zip](http://people.freebsd.org/~w…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Low Power Node SMD v1 (CR1632 battery)

author: GertSanders
Top
Bottom

2 layer board of 0.80 x 0.90 inches (20.3 x 22.9 mm)
Uploaded: March 24, 2016
Shared: March 27, 2016
Total Price: $3.60

Untested

Untested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Low Power Node SMD v1 (atmega328p and nrf24l01+)

author: GertSanders
Top
Bottom

2 layer board of 0.80 x 0.90 inches (20.3 x 22.9 mm)
Uploaded: March 24, 2016
Shared: March 27, 2016
Total Price: $3.60

Works nicely

Works nicely

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEA5767 Breakout Board

author: phtvs
Top
Bottom

2 layer board of 1.07 x 0.62 inches (27.1 x 15.8 mm)
Uploaded: April 02, 2015
Shared: March 27, 2016
Total Price: $3.30

Breakout Board for TEA5767

Breakout Board for TEA5767

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bikelight attiny85

author: donpdonp
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.6 x 25.6 mm)
Uploaded: April 15, 2015
Shared: March 27, 2016
Total Price: $5.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PlugCopter 2015-May

author: donpdonp
Top
Bottom

2 layer board of 2.00 x 1.04 inches (50.9 x 26.5 mm)
Uploaded: April 22, 2015
Shared: March 27, 2016
Total Price: $10.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp-ftl

author: donpdonp
Top
Bottom

2 layer board of 0.85 x 1.70 inches (21.5 x 43.2 mm)
Uploaded: March 27, 2016
Shared: March 27, 2016
Total Price: $7.20

ESP8266 (ESP-06) Wifi with USB power, a programming port, two ports for sensors (therm and light), and a neopixel port.

Possible uses: wifi reporting thermometer, wifi controlled neopixel strip

ESP8266 (ESP-06) Wifi with USB power, a programming port, two ports for sensors (therm and light), and a neopixel port.

Possible uses: wifi reporting thermometer, wifi controlled neopixel strip

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

24bit BCD Clock Driver

author: flimshaw
Top
Bottom

2 layer board of 1.24 x 2.40 inches (31.4 x 61.0 mm)
Uploaded: January 20, 2016
Shared: March 27, 2016
Total Price: $14.85

ATTiny45 driving 3 shift-registers, kind of set up for 6 4bit drivers

ATTiny45 driving 3 shift-registers, kind of set up for 6 4bit drivers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZM1005 Nixie Module

author: flimshaw
Top
Bottom

2 layer board of 1.02 x 1.52 inches (25.8 x 38.5 mm)
Uploaded: January 04, 2016
Shared: March 27, 2016
Total Price: $7.70

Board for mounting and controlling ZM1005 nixie controllers. Requires a high-voltage DC power supply and a 74141 or equivalent

Board for mounting and controlling ZM1005 nixie controllers. Requires a high-voltage DC power supply and a 74141 or equivalent

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

555 Driven Nixie Tube Power Supply

author: flimshaw
Top
Bottom

2 layer board of 1.36 x 1.40 inches (34.6 x 35.6 mm)
Uploaded: January 19, 2016
Shared: March 27, 2016
Total Price: $9.50

Revision 1, based on http://talkingelectronics.com/projects/50%20-%20555%20Circuits/images/170vSupply.gif

Revision 1, based on http://talkingelectronics.com/projects/50%20-%20555%20Circuits/images/170vSupply.gif

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AMIGA USB PS/2 Adapter

author: X-cAlibur
Top
Bottom

2 layer board of 0.67 x 1.09 inches (17.0 x 27.6 mm)
Uploaded: March 26, 2016
Shared: March 26, 2016
Total Price: $3.60

This allows you to connect an USB supporting PS/2 protocol mouse on an Amiga

This allows you to connect an USB supporting PS/2 protocol mouse on an Amiga

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

858D+ Adapter for AtmegaXX8P instead of MK1841D3

author: GiantGnome
Top
Bottom

2 layer board of 1.27 x 0.93 inches (32.2 x 23.7 mm)
Uploaded: March 06, 2016
Shared: March 26, 2016
Total Price: $5.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Speeduino front panel Rev2

author: FilipW
Top
Bottom

2 layer board of 4.06 x 2.09 inches (103.0 x 53.0 mm)
Uploaded: February 29, 2016
Shared: March 26, 2016
Total Price: $42.30

Generic breakout panel for Speeduino V0.4 EMS. Mounted in a Hammond 1455 enclosure. Revision 2.

Generic breakout panel for Speeduino V0.4 EMS. Mounted in a Hammond 1455 enclosure. Revision 2.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2016.03.25 Valve Controller

author: mserlin
Top
Bottom

2 layer board of 1.90 x 2.56 inches (48.3 x 65.0 mm)
Uploaded: March 25, 2016
Shared: March 25, 2016
Total Price: $24.30

Board to design to controll solenoid valves

Board to design to controll solenoid valves

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PPM2DSM

Top
Bottom

2 layer board of 1.31 x 1.31 inches (33.2 x 33.2 mm)
Uploaded: March 16, 2015
Shared: March 25, 2016
Total Price: $8.50

PPM to DSM

see: http://github.com/JR63/PPM2DSM

PPM to DSM

see: http://github.com/JR63/PPM2DSM

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DS18B20 Breakout

author: brooke
Top
Bottom

2 layer board of 0.54 x 0.45 inches (13.6 x 11.4 mm)
Uploaded: March 13, 2016
Shared: March 25, 2016
Total Price: $1.20

Breakout Board for DS18B20 sensor

Breakout Board for DS18B20 sensor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Apple IIc Game Port Adapter

author: option8
Top
Bottom

2 layer board of 1.25 x 1.25 inches (31.8 x 31.7 mm)
Uploaded: July 23, 2015
Shared: March 25, 2016
Total Price: $7.80

Adapter for 16-pin Apple II joysticks to 9-pin D-sub connector. Rotated to fit hand controllers (paddles)

Adapter for 16-pin Apple II joysticks to 9-pin D-sub connector. Rotated to fit hand controllers (paddles)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Valve Controller Arduino Board

author: mserlin
Top
Bottom

2 layer board of 3.30 x 2.34 inches (83.8 x 59.4 mm)
Uploaded: March 24, 2016
Shared: March 24, 2016
Total Price: $38.55

Valve Controller Arduino Board

Valve Controller Arduino Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ValveController.brd

author: mserlin
Top
Bottom

2 layer board of 1.89 x 2.56 inches (48.0 x 65.0 mm)
Uploaded: March 24, 2016
Shared: March 24, 2016
Total Price: $24.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy