Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

CoreIR Transponder - I-Lap Compatible (balance connector)

author: TimJC
Top
Bottom

2 layer board of 0.52 x 0.73 inches (13.2 x 18.5 mm)
Uploaded: July 28, 2016
Shared: July 28, 2016
Total Price: $1.85

This version has a 5v regulator and is designed to plug into the balance lead of a LiPo battery. It is powered by just the first two cells of the battery and should not result in unbalancing the pack due to the low current draw.

This version has a 5v regulator and is designed to plug into the balance lead of a LiPo battery. It is powered by just the first two cells of the battery and should not result in unbalancing the pack due to the low current draw.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Magnetic Sensor

author: DevilTech-Team1559
Top
Bottom

2 layer board of 1.00 x 0.50 inches (25.4 x 12.7 mm)
Uploaded: September 13, 2015
Shared: July 27, 2016
Total Price: $2.50

Hall Effect Sensor with LED

Hall Effect Sensor with LED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RoboRio Stacker

author: DevilTech-Team1559
Top
Bottom

2 layer board of 2.70 x 0.90 inches (68.6 x 22.9 mm)
Uploaded: January 25, 2016
Shared: July 27, 2016
Total Price: $12.15

Allows stacking a board on top of Rioduino

Allows stacking a board on top of Rioduino

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SHARP memory display and Teensy LC [f6cf2c4]

author: fustini
Top
Bottom

2 layer board of 1.93 x 2.01 inches (49.0 x 51.0 mm)
Uploaded: July 26, 2016
Shared: July 27, 2016
Total Price: $19.35

Description

Test board for SHARP memory display and Teensy LC

Blog

GitHub

Show full description

Description

Test board for SHARP memory display and Teensy LC

Blog

GitHub

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi Zero TFT LCD adapter board v0.1

author: flowc
Top
Bottom

2 layer board of 1.61 x 2.61 inches (40.9 x 66.3 mm)
Uploaded: July 26, 2016
Shared: July 27, 2016
Total Price: $21.00

Compact PCB for adding a 2.2" TFT LCD adapter to a Pi Zero

See github.com/solon/pi-zero-tft-adapter

Tested with a Pi Zero 1.3 and an Adafruit 2.2" TFT LCD display.

Compact PCB for adding a 2.2" TFT LCD adapter to a Pi Zero

See github.com/solon/pi-zero-tft-adapter

Tested with a Pi Zero 1.3 and an Adafruit 2.2" TFT LCD display.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

16175^0

author: epccs
Top
Bottom

2 layer board of 1.70 x 1.90 inches (43.2 x 48.3 mm)
Uploaded: June 26, 2016
Shared: July 27, 2016
Total Price: $16.15

CCtest

Charge Controller test board.

CCtest

Status

CCtest

Charge Controller test board.

CCtest

Status

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueSaab v4.2

author: Edison517
Top
Bottom

2 layer board of 2.44 x 2.44 inches (62.0 x 62.0 mm)
Uploaded: July 27, 2016
Shared: July 27, 2016
Total Price: $29.75

Added caps, fixed USB mounting holes, added via stitching to 3.3v

Added caps, fixed USB mounting holes, added via stitching to 3.3v

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF22

author: ok1ift
Top
Bottom

2 layer board of 1.51 x 1.72 inches (38.3 x 43.7 mm)
Uploaded: April 27, 2016
Shared: July 27, 2016
Total Price: $12.95

RF22

RF22

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PKSFPV Digispark ERLT Ponder v2

author: ntthhtl
Top
Bottom

2 layer board of 0.81 x 0.71 inches (20.5 x 18.0 mm)
Uploaded: July 24, 2016
Shared: July 27, 2016
Total Price: $2.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESPTool v0.2

author: dangrie158
Top
Bottom

2 layer board of 1.85 x 1.38 inches (47.0 x 35.0 mm)
Uploaded: July 25, 2016
Shared: July 27, 2016
Total Price: $12.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EM7180+MPU9250Nano.v03b

author: PeskyProducts
Top
Bottom

4 layer board of 0.41 x 0.41 inches (10.3 x 10.3 mm)
Uploaded: July 27, 2016
Shared: July 27, 2016
Total Price: $1.60

Small wearable reference design for EM7180 managing the MPU9250 9 DoF IMU. Easy-to-solder 1-mm through holes on one side for power, I2C and interrupt attached in a thin wire bundle. Added ADO to change I2C address of EM7180 to gang more than one wearable nano board.

Small wearable reference design for EM7180 managing the MPU9250 9 DoF IMU. Easy-to-solder 1-mm through holes on one side for power, I2C and interrupt attached in a thin wire bundle. Added ADO to change I2C address of EM7180 to gang more than one wearable nano board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NT controller

author: CPRobertson1
Top
Bottom

2 layer board of 1.99 x 2.80 inches (50.5 x 71.1 mm)
Uploaded: July 27, 2016
Shared: July 27, 2016
Total Price: $27.80

stackable HV shift register controller

stackable HV shift register controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EM7180+MPU9250Nano.v03a

author: PeskyProducts
Top
Bottom

4 layer board of 0.41 x 0.41 inches (10.3 x 10.3 mm)
Uploaded: July 27, 2016
Shared: July 27, 2016
Total Price: $1.60

Small wearable reference design for EM7180 managing the MPU9250 9 DoF IMU. Easy-to-solder 1-mm through holes on one side for power, I2C and interrupt attached in a thin wire bundle.

Small wearable reference design for EM7180 managing the MPU9250 9 DoF IMU. Easy-to-solder 1-mm through holes on one side for power, I2C and interrupt attached in a thin wire bundle.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266 Breakout

author: gtaubman
Top
Bottom

2 layer board of 1.17 x 0.85 inches (29.6 x 21.5 mm)
Uploaded: July 27, 2016
Shared: July 27, 2016
Total Price: $4.90

ESP8266 12-E Breakout Board

ESP8266 12-E Breakout Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

eeblvd's v2

author: manguztap
Top
Bottom

2 layer board of 2.56 x 2.56 inches (64.9 x 64.9 mm)
Uploaded: May 07, 2016
Shared: July 26, 2016
Total Price: $32.60

eeblvd's v2

eeblvd's v2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mic69502_breakout.brd

author: skycks
Top
Bottom

2 layer board of 1.08 x 0.88 inches (27.4 x 22.4 mm)
Uploaded: July 20, 2016
Shared: July 26, 2016
Total Price: $4.70

Breadboard-compatible breakout board for Micrel MIC69502 LDO IC

Breadboard-compatible breakout board for Micrel MIC69502 LDO IC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CoreIR Transponder - I-Lap Compatible

author: TimJC
Top
Bottom

2 layer board of 0.47 x 0.72 inches (11.9 x 18.3 mm)
Uploaded: July 26, 2016
Shared: July 26, 2016
Total Price: $1.65

Open source drone racing transponder that is I-Lap compatible.

Open source drone racing transponder that is I-Lap compatible.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Photodiode Amplifier - 5V

author: cindyharnett
Top
Bottom

2 layer board of 0.57 x 0.77 inches (14.4 x 19.5 mm)
Uploaded: July 17, 2016
Shared: July 26, 2016
Total Price: $2.15

A 2 stage amplifier with gain 2.7e6 V/A. R1=180K, R2=3.3K, R3=47K, C1=1pF, C2=10uF, C3=0.1uF tested and working

A 2 stage amplifier with gain 2.7e6 V/A. R1=180K, R2=3.3K, R3=47K, C1=1pF, C2=10uF, C3=0.1uF tested and working

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LCD_Shield.kicad_pcb

author: Aleksejsm
Top
Bottom

2 layer board of 1.49 x 1.26 inches (37.7 x 31.9 mm)
Uploaded: July 26, 2016
Shared: July 26, 2016
Total Price: $9.30

2.2" 50pin LCD Shield with Touch Screen

2.2" 50pin LCD Shield with Touch Screen

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Atari Joystick To Tandy

author: Jayeson
Top
Bottom

2 layer board of 0.60 x 0.64 inches (15.2 x 16.2 mm)
Uploaded: July 26, 2016
Shared: July 26, 2016
Total Price: $1.85

Adapter that fits into a D-9 shell.

Adapter that fits into a D-9 shell.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy