Shared projects

OSH Park I Can Solder

2 layer board of 1.19 x 1.35 inches (30.3 x 34.3 mm).
Shared on April 21st, 2018 23:14

BOM and Instructions at https://github.com/aspro648/KiCad/tree/master/projects/OSH Park I Can Solder


OSH Park I Can Solder

2 layer board of 1.19 x 1.35 inches (30.3 x 34.3 mm).
Shared on April 21st, 2018 23:14

BOM and Instructions at https://github.com/aspro648/KiCad/tree/master/projects/OSH Park I Can Solder



Open Source Turtle Robot Board 0.2

2 layer board of 1.26 x 2.31 inches (32.0 x 58.7 mm).
Shared on April 18th, 2018 05:51

Turtle robot that uses an Adafruit Trinket Pro as MCU. BOM & instructions at https://github.com/aspro648/OSTR


Open Source Turtle Robot Board 0.2

2 layer board of 1.26 x 2.31 inches (32.0 x 58.7 mm).
Shared on April 18th, 2018 05:51

Turtle robot that uses an Adafruit Trinket Pro as MCU. BOM & instructions at https://github.com/aspro648/OSTR



rroll v0.3

2 layer board of 0.80 x 1.05 inches (20.4 x 26.8 mm).
Shared on March 30th, 2018 05:34

https://github.com/aspro648/KiCad/tree/master/projects/rroll


rroll v0.3

2 layer board of 0.80 x 1.05 inches (20.4 x 26.8 mm).
Shared on March 30th, 2018 05:34

https://github.com/aspro648/KiCad/tree/master/projects/rroll



Push Button IR light.kicad_pcb

2 layer board of 3.06 x 1.26 inches (77.6 x 31.9 mm).
Shared on March 8th, 2018 23:27


Push Button IR light.kicad_pcb

2 layer board of 3.06 x 1.26 inches (77.6 x 31.9 mm).
Shared on March 8th, 2018 23:27



SMD Challenge R1

2 layer board of 1.07 x 1.07 inches (27.1 x 27.1 mm).
Shared on March 6th, 2018 01:50

BOM and blog at https://hackaday.io/project/25265-an-unfortunate-smd-project


SMD Challenge R1

2 layer board of 1.07 x 1.07 inches (27.1 x 27.1 mm).
Shared on March 6th, 2018 01:50

BOM and blog at https://hackaday.io/project/25265-an-unfortunate-smd-project