Shared Projects

Shared Projects

1.8V 2A Portable Power Supply Li-Ion USB Charging - 1V82AR5

author: jckz82
Top
Bottom

2 layer board of 1.44 x 1.44 inches (36.5 x 36.5 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $10.30

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to …

Show full description

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3.3V 2A Portable Power Supply Li-Ion USB Charging - 3V32AR5

author: jckz82
Top
Bottom

2 layer board of 1.44 x 1.44 inches (36.5 x 36.5 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $10.30

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to prov…

Show full description

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to prov…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5V 2A Portable Power Supply Li-Ion USB Charging - 5V2AR5

author: jckz82
Top
Bottom

2 layer board of 1.44 x 1.44 inches (36.5 x 36.5 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $10.30

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to prov…

Show full description

I designed this power supply for small projects, prototyping, Arduino, IoT, and wireless embedded applications. An ATtiny45 provides the ideal balance between features and efficiency. When on, efficiencies go as high as 92%. When off, it only consumes 2μA! It uses two LEDs, red and green, to prov…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HackBerry Lab Soldering Kit

author: zrcochran
Top
Bottom

2 layer board of 1.26 x 1.09 inches (32.0 x 27.7 mm)
Uploaded: February 24, 2016
Shared: May 08, 2017
Total Price: $6.85

Kit to Help Teach CRT Soldering

Kit to Help Teach CRT Soldering

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LiPo Battery Breadboard Supply with Charging

author: orlandohoilett
Top
Bottom

2 layer board of 2.17 x 0.60 inches (55.0 x 15.3 mm)
Uploaded: April 25, 2017
Shared: May 08, 2017
Total Price: $6.50

Currently untested. Just received boards from OSHPark.

Follow along the journey! https://github.com/CalvEngIO/LiPoBBSupplyWithCharging.git

Currently untested. Just received boards from OSHPark.

Follow along the journey! https://github.com/CalvEngIO/LiPoBBSupplyWithCharging.git

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LiPo Battery Breadboard Supply

author: orlandohoilett
Top
Bottom

2 layer board of 2.17 x 0.60 inches (55.0 x 15.3 mm)
Uploaded: March 14, 2017
Shared: May 08, 2017
Total Price: $6.50

This is a handy power supply for Lithium Polymer batteries breadboards. It features an on-off switch for a 3.3V regulator, as well as jumpers to select between un-regulated and regulated power.

https://github.com/CalvEngIO/LiPoBatteryBreadboardSupply

This is a handy power supply for Lithium Polymer batteries breadboards. It features an on-off switch for a 3.3V regulator, as well as jumpers to select between un-regulated and regulated power.

https://github.com/CalvEngIO/LiPoBatteryBreadboardSupply

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

battery_sensor2.zip

author: night_ghost
Top
Bottom

2 layer board of 0.55 x 0.46 inches (13.9 x 11.6 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $1.25

Current (up to 60A) and Voltage sensor on 2* ACS712

Current (up to 60A) and Voltage sensor on 2* ACS712

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Kitty Ears!

author: cacklestein
Top
Bottom

2 layer board of 1.97 x 1.34 inches (50.1 x 34.1 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $13.20

PCB for 3D printed kitty ear headband

PCB for 3D printed kitty ear headband

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Yuan_large.zip

author: luoyuan
Top
Bottom

2 layer board of 6.76 x 7.00 inches (171.7 x 177.7 mm)
Uploaded: May 07, 2017
Shared: May 08, 2017
Total Price: $236.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Carlos_Garibay_ITESO_KL46_Audio_codec

author: Charlie_rocker
Top
Bottom

4 layer board of 2.01 x 1.51 inches (51.0 x 38.3 mm)
Uploaded: April 15, 2015
Shared: May 08, 2017
Total Price: $30.20

MP3 Player with Freescale Audio Codec

MP3 Player with Freescale Audio Codec

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nrf-v1.zip

author: khyale
Top
Bottom

2 layer board of 0.96 x 0.45 inches (24.5 x 11.4 mm)
Uploaded: May 08, 2017
Shared: May 08, 2017
Total Price: $2.15

2.4GHz wireless module based on Nordic NRF24L01 chip

2.4GHz wireless module based on Nordic NRF24L01 chip

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SigGen

author: ataradov
Top
Bottom

2 layer board of 1.54 x 2.02 inches (39.2 x 51.2 mm)
Uploaded: April 23, 2017
Shared: May 07, 2017
Total Price: $15.55

100+ MHz signal generator and frequency counter based on Atmel SAM D11

100+ MHz signal generator and frequency counter based on Atmel SAM D11

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

µBITX Bidirectional RF Amplifier

author: Slay3rOne
Top
Bottom

2 layer board of 1.35 x 1.95 inches (34.3 x 49.5 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $13.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[Not Tested] LED Minute Repeater Clock - rev 0.2

author: ryo1kato
Top
Bottom

2 layer board of 1.17 x 1.51 inches (29.6 x 38.2 mm)
Uploaded: April 29, 2017
Shared: May 07, 2017
Total Price: $8.75

A clock with blinking LED telling you time. Useful if you’re myopic and don’t have glasses or smartphone within reach of your hand when you’re in the bed (like me, with my two kids blocking my both sides) https://github.com/ryo1kato/arduino-clock/tree/trinket-neopixel Using ATtiny85 micro contro…

Show full description

A clock with blinking LED telling you time. Useful if you’re myopic and don’t have glasses or smartphone within reach of your hand when you’re in the bed (like me, with my two kids blocking my both sides) https://github.com/ryo1kato/arduino-clock/tree/trinket-neopixel Using ATtiny85 micro contro…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pot-Hookup miniboards.kicad_pcb

author: StrangeDesignsLLC
Top
Bottom

2 layer board of 0.34 x 0.33 inches (8.5 x 8.4 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $0.55

Mini Patch board for Bourns PTD901 series potentiometers

Mini Patch board for Bourns PTD901 series potentiometers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BrewPi Shield.kicad_pcb

author: supercow
Top
Bottom

2 layer board of 1.37 x 2.11 inches (34.7 x 53.5 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $14.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FetBoard.brd

author: Jetty
Top
Bottom

2 layer board of 1.40 x 2.19 inches (35.6 x 55.6 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $15.30

Liteplacer FET Board

Liteplacer FET Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Grasshopper.v01g

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.76 inches (17.9 x 44.7 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $12.40

Changed labels on pins 14 &15, moved AREF solder jumper to back.

Changed labels on pins 14 &15, moved AREF solder jumper to back.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

O2 Keypad

author: ai03
Top
Bottom

2 layer board of 1.25 x 0.93 inches (31.7 x 23.6 mm)
Uploaded: May 07, 2017
Shared: May 07, 2017
Total Price: $5.75

A 2-key keypad based on V-USB and the ATTINY85

A 2-key keypad based on V-USB and the ATTINY85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Livolo-2-channels-1-way-EU-switchVL-C700X-1_Ver_C2.zip

author: Mysensors_LIVOLO_Adapt_plate
Top
Bottom

2 layer board of 1.70 x 1.71 inches (43.1 x 43.5 mm)
Uploaded: May 06, 2017
Shared: May 06, 2017
Total Price: $14.50

Livolo diy touch plate for MySensors design from mysensors user @mtiutiu

Livolo diy touch plate for MySensors design from mysensors user @mtiutiu

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy