Shared Projects

https://www.youtube.com/playlist?list=PLrlRea95Kx7Impd6-xJ1vrx1G_OLy6BmD

https://www.youtube.com/playlist?list=PLrlRea95Kx7KsMcMdxS9Br003B7iOswZu

Hacker Home Security Door Sensor v0.1

Ultra-low-power asset tracker with STM32L433 MCU host, CAM M8Q concurrent GNSS engine, EM7180+MPU9250+MS5637 for absolute orientation and altitude, and ESP8285 wifi for connectivity. Separate UART connections between host and modules, control of power enable via GPIOs or serial commands from host, RTC backup batteries and power from single-cell LiPo.

DIY version of the Frantone Vibutron. Layout by storyboardist/Effects Layouts

A first try, based on http://kempbros.github.io/antennas/Patch_Antenna_Generator/

Does not work as intended, center frequency is about 4.95 GHz. May be usable for 5 GHz WLAN :-)

E-Paper Badge with Teensy LC designed in KiCad

E-Paper badge designed in KiCad to connect Pervasive Displays 2.15" E-Paper (E2215CS062) to Teensy LC. (Teensy 3.2 is also compatible). Based Teensy E-Paper Shield by Jarek Lupinski in EAGLE.

KiCad PCB design files:

• repo: kicad-teensy-epaper
• commit: Reworked layout for aesthetics [0a40263]
• requires KiCad library wickerlib by Jenner Hanni of Wickerbox Electronics for the 34-position FPC connector that the e-paper display plugs into:
  • CONN-HEADER-FH34SRJ-34S-0.5SH.kicad_mod

Bill of Materials (BoM)

• Teensy LC sold by OSH Park. Designed and manufactured by PJRC.
  • Teensy 3.2 is also compatible but more expensive
• Pervasive Displays 2.15" e-paper with ITC
  • Model number: E2215CS062
  • Digi-Key: E2215CS062-ND
  • Datasheet: 2.15" TFT EPD Panel (E2215CS062)
  • App note: 2.15" Aurora_Mb Application Note
• Hirose FH34SRJ-34S-0.5SH FPC connector
  • Part number: FH34SRJ-34S-0.5SH(99)
  • Digi-Key: H124726CT-ND
  • Datasheet: FH34(S) Series Datasheet
• Teensy headers
  • Digikey: S7012-ND (CONN HEADER FEMALE 14POS.1" TIN)
  • optional as Teensy can be soldered directly to PCB
• Capacitor 1uF 0805 (quantity 9)
  • Digi-Key: 1276-1066-1-ND (CAP CER 1UF 25V X7R 0805)
  • Reference: C1 C3 C4 C5 C6 C7 C8 C9 C10
  • Note: it is cheaper to purhcase qty 10
• Capacitor 2.2uF 0805
  • Digi-Key: 1276-2953-1-ND (CAP CER 2.2UF 25V X7R 0805)
  • Reference: C2
• Inductor 47uH
  • Digi-Key: 732-7252-1-ND (FIXED IND 47UH 800MA 521 MOHM)
  • Reference: L1
• Mosfet N-Ch SOT23
  • Digi-Key: 785-1012-1-ND (MOSFET N-CH 30V 3.8A SOT23)
  • Reference: Q1
• Resistor 2.2 Ohm 0805
  • Digi-Key: 311-2.20CRCT-ND (RES SMD 2.2 OHM 1% 1/8W 0805)
  • Reference: R1
• Schotty diodes SOD123 (quantity 3)
  • Digi-Key: MBR0530CT-ND (DIODE SCHOTTKY 30V 500MA SOD123)
  • Reference: D1 D2 D3

Digi-Key shopping cart

Battery Power

• These products are used to power the badge from a battery.
• LiPo battery charger add-on for Teensy 3.1 from Pesky Products on Tindie
  • WARNING: The trace between VIN and VUSB must be cut! Here is an demostration of cutting the trace on Adafruit Learning System.
• Lithium Ion Polymer Battery - 3.7v 500mAh from Adafruit
  • Initial capacity chosen for a good trade off between weight and power. I have not yet measured how long it will run with different capacities.

Source Code

• uses EPD215 Arduino Library by Jarek Lupinski for his E-paper Teensy Shield
• requires pinout modification:
  • EpaperQuoteDisplay.ino
  • EPD215 epaper( 17, 16, 14, 15, 13, 11 );

Photos

• Google Photos gallery
• images directory in github repo

Video

• YouTube: E-Paper Badge with Teensy LC designed in KiCad

Related: Jarek’s ePaper Teensy shield

• OSH Park shared project: Teensy e-Paper shield
• My repo of Jarek’s design files: TeensyEpaperShield

INFO HERE!

Condor Cabinet Simulator from RunOffGroove.

PCB rev.2 layouted by grrrunge for FreeStompboxes

More info here!

Plessey Contactless board

Plessey Contact Pad

Plessey Contact Sensor Board