Simple USB Sound Card Interface
author: goboxgizmos
2 layer board of 2.73 x 1.73 inches (69.3 x 43.9 mm)
Uploaded:
December 08, 2017
Shared:
December 08, 2017
Total Price:
$23.55
Ham Radio to PC Sound Card Isolated Interface.
http://g7ltt.blogspot.com/2017/11/isolated-sound-card-interface.html
Ham Radio to PC Sound Card Isolated Interface.
http://g7ltt.blogspot.com/2017/11/isolated-sound-card-interface.html
DieWithMC.zip
author: RonakRamachandran
2 layer board of 1.47 x 1.07 inches (37.3 x 27.1 mm)
Uploaded:
December 05, 2017
Shared:
December 08, 2017
Total Price:
$7.80
A simple electronic semi-random die.
A simple electronic semi-random die.
VE6JI_OCXO_12v_Supply.brd
author: VE6JI
2 layer board of 0.81 x 1.01 inches (20.5 x 25.6 mm)
Uploaded:
December 07, 2017
Shared:
December 07, 2017
Total Price:
$4.05
Regulate the common ham voltage of 13.8Vdc to 12.0Vdc. Useful for supplying 12V OCXO
Regulate the common ham voltage of 13.8Vdc to 12.0Vdc. Useful for supplying 12V OCXO
makey_makey-v12.1.brd
author: jfryar30272
2 layer board of 3.71 x 1.91 inches (94.2 x 48.5 mm)
Uploaded:
November 02, 2017
Shared:
December 07, 2017
Total Price:
$35.40
HEDL to RJ45 Breakout.kicad_pcb
author: JanBeck
2 layer board of 1.11 x 1.46 inches (28.1 x 37.0 mm)
Uploaded:
October 27, 2017
Shared:
December 07, 2017
Total Price:
$8.05
I connect to a lot of encoders in various projects, and usually, I will try to hook them up to a RJ45 connector, as described here: https://sites.google.com/site/janbeck/hedl-encoder-to-rj45-adapter-board
This board primarily targets HEDL encoders, but can also be used with others, by either …
Show full description
I connect to a lot of encoders in various projects, and usually, I will try to hook them up to a RJ45 connector, as described here: https://sites.google.com/site/janbeck/hedl-encoder-to-rj45-adapter-board
This board primarily targets HEDL encoders, but can also be used with others, by either …
Show full description
BAR30-SENSOR.brd
author: decent-design
2 layer board of 0.45 x 0.45 inches (11.5 x 11.5 mm)
Uploaded:
December 07, 2017
Shared:
December 07, 2017
Total Price:
$1.00
3DO USB QSB
author: citrus3000psi
2 layer board of 2.20 x 1.48 inches (56.0 x 37.6 mm)
Uploaded:
November 13, 2017
Shared:
December 06, 2017
Total Price:
$16.30
This is designed to be used with Mnemo's 3DO USB loader with an FZ-10
Parts required:
WM17463-ND
609-5104-ND
609-1747-ND
**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.
This is designed to be used with Mnemo's 3DO USB loader with an FZ-10
Parts required:
WM17463-ND
609-5104-ND
609-1747-ND
**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.
Owl HC
author: gryphonhouse
2 layer board of 2.50 x 2.00 inches (63.5 x 50.8 mm)
Uploaded:
April 21, 2017
Shared:
December 06, 2017
Total Price:
$25.00
A higher current OWL - Should I call it HOWL?
A higher current OWL - Should I call it HOWL?
OpticSpy Analog (Rev. B)
author: joegrand
2 layer board of 1.86 x 1.68 inches (47.2 x 42.6 mm)
Uploaded:
December 02, 2017
Shared:
December 06, 2017
Total Price:
$15.55
Receiver module for Optical Covert Channel experiments.
Analog version based on Maxim Integrated’s AN1117 application note.
Rev. B includes potentiometers and test points for easier configuration.
Receiver module for Optical Covert Channel experiments.
Analog version based on Maxim Integrated’s AN1117 application note.
Rev. B includes potentiometers and test points for easier configuration.
Quadrigotion TMC2660
author: hzeller
4 layer board of 4.93 x 1.58 inches (125.1 x 40.1 mm)
Uploaded:
December 06, 2017
Shared:
December 06, 2017
Total Price:
$77.70
Four stepper drivers, one simple connector.
Based on sophisticated TMC2660; 24V 2.8A RMS (4A peak) per motor phase.
Four stepper drivers, one simple connector.
Based on sophisticated TMC2660; 24V 2.8A RMS (4A peak) per motor phase.
AccelerationDataLogger v1 board
author: fclad
2 layer board of 3.08 x 3.10 inches (78.2 x 78.8 mm)
Uploaded:
December 06, 2017
Shared:
December 06, 2017
Total Price:
$47.75
An open source acceleration data logger board and software, using widely available MEMS
An open source acceleration data logger board and software, using widely available MEMS
ATtiny13 LED matrix badge
author: luca-anastasio
2 layer board of 2.01 x 2.01 inches (51.0 x 51.0 mm)
Uploaded:
December 05, 2017
Shared:
December 05, 2017
Total Price:
$20.20
Simple charlieplexed LED matrix Source and firmware
Simple charlieplexed LED matrix Source and firmware
USB potentiostat/galvanostat, Detavernier research group
author: danielfp248
2 layer board of 1.98 x 1.98 inches (50.2 x 50.2 mm)
Uploaded:
December 05, 2017
Shared:
December 05, 2017
Total Price:
$19.50
This is the potentiostat published here http://www.sciencedirect.com/science/article/pii/S2468067217300317#!. Shared here with permission of the author.
This is the potentiostat published here http://www.sciencedirect.com/science/article/pii/S2468067217300317#!. Shared here with permission of the author.
