Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

PDXWLF - Bling Your Thing

author: hydronics
Top
Bottom

2 layer board of 1.24 x 1.05 inches (31.4 x 26.7 mm)
Uploaded: January 03, 2018
Shared: January 03, 2018
Total Price: $6.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_pmod_5v_jumper_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 0.66 x 0.26 inches (16.7 x 6.5 mm)
Uploaded: December 23, 2017
Shared: January 03, 2018
Total Price: $0.80

5V Jumper for between dual-PMOD connectors between BML FPGA boards with dual-PMODs and BML dual-PMOD peripherals. 0.550" spaced

5V Jumper for between dual-PMOD connectors between BML FPGA boards with dual-PMODs and BML dual-PMOD peripherals. 0.550" spaced

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IN-12 Nixie Breakout

author: brikbot
Top
Bottom

2 layer board of 1.05 x 0.88 inches (26.7 x 22.2 mm)
Uploaded: November 25, 2017
Shared: January 03, 2018
Total Price: $4.55

IN-12 nixie breakout board for providing standard 0.1" headers.

IN-12 nixie breakout board for providing standard 0.1" headers.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TSSOP-16 Breakout Board

author: brikbot
Top
Bottom

2 layer board of 0.65 x 0.85 inches (16.5 x 21.6 mm)
Uploaded: December 03, 2017
Shared: January 03, 2018
Total Price: $2.75

Breakout board for 16-pin TSSOP IC’s. Based on pattern from TI.

Breakout board for 16-pin TSSOP IC’s. Based on pattern from TI.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TritiLED V3.0 OSLON Signal Edition

author: ted.yapo
Top
Bottom

2 layer board of 0.91 x 0.91 inches (23.1 x 23.1 mm)
Uploaded: December 26, 2017
Shared: January 03, 2018
Total Price: $4.10

Multi-year LED glow marker

Multi-year LED glow marker

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MySensors Gateway for Raspberry PI

author: alexsh1
Top
Bottom

2 layer board of 2.57 x 1.19 inches (65.2 x 30.2 mm)
Uploaded: January 03, 2018
Shared: January 03, 2018
Total Price: $15.20

More details are available here:

https://www.openhardware.io/view/470/MySensors-Gateway-for-Raspberry-PI#tabs-comments

More details are available here:

https://www.openhardware.io/view/470/MySensors-Gateway-for-Raspberry-PI#tabs-comments

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cpu28v1.zip

author: EnisASLAN
Top
Bottom

4 layer board of 1.98 x 1.51 inches (50.4 x 38.3 mm)
Uploaded: October 30, 2015
Shared: January 03, 2018
Total Price: $29.90

cpu module

cpu module

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dog

author: Junes-PhD
Top
Bottom

2 layer board of 6.01 x 4.01 inches (152.6 x 101.8 mm)
Uploaded: January 03, 2018
Shared: January 03, 2018
Total Price: $120.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Kilo Distribution

author: ChainsDD
Top
Bottom

2 layer board of 1.33 x 0.86 inches (33.8 x 21.7 mm)
Uploaded: January 03, 2018
Shared: January 03, 2018
Total Price: $5.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Disintegrated LM3909

author: Dillon1337
Top
Bottom

2 layer board of 0.83 x 0.56 inches (21.1 x 14.1 mm)
Uploaded: December 11, 2017
Shared: January 03, 2018
Total Price: $2.30

Discrete component replacement for the LM3909 LED flasher

Discrete component replacement for the LM3909 LED flasher

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IGBT Modul driver version 1.1

author: TTM
Top
Bottom

2 layer board of 2.99 x 2.35 inches (75.9 x 59.7 mm)
Uploaded: January 03, 2018
Shared: January 03, 2018
Total Price: $35.10

inverted gate drivers. Fixed in v1.3

Opto-isolated High-power IGBT-module H-Bridge Driver. This board was designed to drive a IGBT-module configured as half a H-bridge. It’s designed to be driven directly by a micro-controller with only one push-pull drive pin do control both high side and lo…

Show full description

inverted gate drivers. Fixed in v1.3

Opto-isolated High-power IGBT-module H-Bridge Driver. This board was designed to drive a IGBT-module configured as half a H-bridge. It’s designed to be driven directly by a micro-controller with only one push-pull drive pin do control both high side and lo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ws0ta-trap-v2.2

author: ke6mt
Top
Bottom

2 layer board of 0.61 x 0.26 inches (15.5 x 6.6 mm)
Uploaded: January 02, 2018
Shared: January 02, 2018
Total Price: $0.75

Simple tiny board for an LC circuit designed to be part of a wire antenna, for the purpose of utilizing the same antenna wire on multiple bands. v2.2

Simple tiny board for an LC circuit designed to be part of a wire antenna, for the purpose of utilizing the same antenna wire on multiple bands. v2.2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Reflow

author: nppc
Top
Bottom

2 layer board of 1.97 x 0.70 inches (50.0 x 17.8 mm)
Uploaded: December 01, 2017
Shared: January 02, 2018
Total Price: $6.85

https://github.com/nppc/Heater12VControl

https://github.com/nppc/Heater12VControl

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GBZ Power Distribution Board.zip

author: JackDG
Top
Bottom

2 layer board of 0.91 x 0.46 inches (23.1 x 11.7 mm)
Uploaded: December 09, 2017
Shared: January 02, 2018
Total Price: $2.05

Power Distribution Board for custom Gameboy Zero (GBZ) systems.

Power Distribution Board for custom Gameboy Zero (GBZ) systems.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Load Sharing Rev2

author: 32bitfun
Top
Bottom

2 layer board of 1.01 x 1.43 inches (25.6 x 36.4 mm)
Uploaded: November 29, 2017
Shared: January 02, 2018
Total Price: $7.15

Solar powered, LiFePo4, BuckBoost Converter, Load Sharing

Solar powered, LiFePo4, BuckBoost Converter, Load Sharing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ledclock

author: smbaker
Top
Bottom

2 layer board of 4.09 x 3.45 inches (103.8 x 87.6 mm)
Uploaded: January 02, 2018
Shared: January 02, 2018
Total Price: $70.50

led clock using 1" or 0.4" displays. GPS sync option.

led clock using 1" or 0.4" displays. GPS sync option.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dev_t816

author: pjlub
Top
Bottom

2 layer board of 1.31 x 0.80 inches (33.4 x 20.3 mm)
Uploaded: January 01, 2018
Shared: January 01, 2018
Total Price: $5.25

Small development board for ATtiny816/1616.

R1 - ~10k pullup on reset line

C1 - 100nF decoupling capacitor

LED1 - power indicator

R2 - suitable current limiting resistor for LED1

all of these are in 0805 size.

The 2x3 connector is for UPDI programming.

Small development board for ATtiny816/1616.

R1 - ~10k pullup on reset line

C1 - 100nF decoupling capacitor

LED1 - power indicator

R2 - suitable current limiting resistor for LED1

all of these are in 0805 size.

The 2x3 connector is for UPDI programming.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FM Radio v1.1

author: stej
Top
Bottom

2 layer board of 1.55 x 1.55 inches (39.4 x 39.4 mm)
Uploaded: January 01, 2018
Shared: January 01, 2018
Total Price: $12.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bord-3

author: brankoto
Top
Bottom

2 layer board of 2.05 x 0.91 inches (52.1 x 23.2 mm)
Uploaded: December 17, 2017
Shared: January 01, 2018
Total Price: $9.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Toslink 1

author: brankoto
Top
Bottom

2 layer board of 1.16 x 1.01 inches (29.5 x 25.7 mm)
Uploaded: December 17, 2017
Shared: January 01, 2018
Total Price: $5.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy