Shared Projects

Shared Projects

bling_your_thing_ Rapides

author: hydronics
Top
Bottom

2 layer board of 1.24 x 1.05 inches (31.4 x 26.7 mm)
Uploaded: March 19, 2018
Shared: March 19, 2018
Total Price: $6.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

antenetrackerV3

author: Buzzfpv
Top
Bottom

2 layer board of 4.07 x 3.35 inches (103.4 x 85.2 mm)
Uploaded: March 18, 2018
Shared: March 18, 2018
Total Price: $68.25

has 4x servo output ,,

has 4x servo output ,,

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RFFilter1r1_W7PUA

author: W7PUA
Top
Bottom

2 layer board of 1.34 x 1.04 inches (34.1 x 26.5 mm)
Uploaded: March 15, 2018
Shared: March 18, 2018
Total Price: $6.95

High Frequency filters of the high-pass/low-pass topology. Typically these are used for wider pass-bands, such as one octave. Cauer/elliptic responses provide good out-of-band rejection with minimal inductors. A latching relay provides a bypass path to allow cascading of the filters. Full det…

Show full description

High Frequency filters of the high-pass/low-pass topology. Typically these are used for wider pass-bands, such as one octave. Cauer/elliptic responses provide good out-of-band rejection with minimal inductors. A latching relay provides a bypass path to allow cascading of the filters. Full det…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HASHD15_V2

author: RGB
Top
Bottom

2 layer board of 0.71 x 2.76 inches (18.0 x 70.0 mm)
Uploaded: February 28, 2018
Shared: March 18, 2018
Total Price: $9.75

An HD-15 (VGA) module board for HAS V3.0 and V3.1 with CSync TTL/75R jumper.

An HD-15 (VGA) module board for HAS V3.0 and V3.1 with CSync TTL/75R jumper.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GFS16 - 16mm FET Board Rev B

author: loneoceanslabs
Top
Bottom

2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded: March 18, 2018
Shared: March 18, 2018
Total Price: $1.95

You can order this together with 18mm LED board. Added footprint for LFPAK33 FET (Q2) and increased center spring pad (e.g. recommend to be used with a large spring like this: http://www.mtnelectronics.com/index.php?route=product/product&product_id=385&search=spring). Only populate Q1 or Q2, not…

Show full description

You can order this together with 18mm LED board. Added footprint for LFPAK33 FET (Q2) and increased center spring pad (e.g. recommend to be used with a large spring like this: http://www.mtnelectronics.com/index.php?route=product/product&product_id=385&search=spring). Only populate Q1 or Q2, not…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SDR Fox 2

author: dntlookbehindu
Top
Bottom

2 layer board of 1.59 x 2.45 inches (40.3 x 62.2 mm)
Uploaded: March 18, 2018
Shared: March 18, 2018
Total Price: $19.45

Second go…

Second go…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX31855 Breakout

author: qwertyboy
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: March 18, 2018
Shared: March 18, 2018
Total Price: $5.00

Breakout board for MAX31855 thermocouple amplifier. 5V logic level compatible.

Part Value Package
C1 0.1uF 0603
C2 10nF 0603
D1 BAS16GWJ SOD123
D2 BAS16GWJ SOD123
IC1 MAX31855KASA+ SOIC-8
IC2 MIC5317-3.3YM5 SOT23-5 …

Show full description

Breakout board for MAX31855 thermocouple amplifier. 5V logic level compatible.

Part Value Package
C1 0.1uF 0603
C2 10nF 0603
D1 BAS16GWJ SOD123
D2 BAS16GWJ SOD123
IC1 MAX31855KASA+ SOIC-8
IC2 MIC5317-3.3YM5 SOT23-5 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Northpaw Nano rev G v43

author: BucketShoes
Top
Bottom

2 layer board of 0.90 x 0.53 inches (22.9 x 13.4 mm)
Uploaded: March 14, 2018
Shared: March 18, 2018
Total Price: $2.35

with vcc isolation for: - lsm303 (to allow 5v icsp; if i can't find a 3v3) -max4822 (to allow being powered by an atmega pin, to reduce sleep power consumption by 100x)

with vcc isolation for: - lsm303 (to allow 5v icsp; if i can't find a 3v3) -max4822 (to allow being powered by an atmega pin, to reduce sleep power consumption by 100x)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power

author: Deltafee
Top
Bottom

2 layer board of 3.46 x 0.89 inches (87.9 x 22.6 mm)
Uploaded: January 31, 2018
Shared: March 17, 2018
Total Price: $15.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZCD Circuit.brd

author: james211
Top
Bottom

2 layer board of 1.75 x 1.24 inches (44.4 x 31.4 mm)
Uploaded: November 16, 2017
Shared: March 17, 2018
Total Price: $10.80

Zero Cross Detector

Zero Cross Detector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NES_turbo_adapter

author: facelessloser
Top
Bottom

2 layer board of 1.62 x 0.97 inches (41.2 x 24.7 mm)
Uploaded: February 18, 2017
Shared: March 17, 2018
Total Price: $7.90

Interface a nes controller to a computer with added turbo button and pot (FAILED PROJECT)

Blog post - https://facelesstech.wordpress.com/2017/03/26/nes-to-usb-adaptor-fail/ Youtube - https://youtu.be/qgFyICQwugc Github - https://github.com/facelessloser/nes2usb_adaptor

Interface a nes controller to a computer with added turbo button and pot (FAILED PROJECT)

Blog post - https://facelesstech.wordpress.com/2017/03/26/nes-to-usb-adaptor-fail/ Youtube - https://youtu.be/qgFyICQwugc Github - https://github.com/facelessloser/nes2usb_adaptor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Weight_coaster

author: facelessloser
Top
Bottom

2 layer board of 2.01 x 1.56 inches (51.0 x 39.5 mm)
Uploaded: August 27, 2017
Shared: March 17, 2018
Total Price: $15.60

ring of ws2812 led which change colour with different weight of your drinks

Blog post - https://facelesstech.wordpress.com/2017/09/17/weight-coaster/

Youtube video - https://www.youtube.com/watch?v=xiPBg8h8AEU

Github - https://github.com/facelessloser/weight_coaster

ring of ws2812 led which change colour with different weight of your drinks

Blog post - https://facelesstech.wordpress.com/2017/09/17/weight-coaster/

Youtube video - https://www.youtube.com/watch?v=xiPBg8h8AEU

Github - https://github.com/facelessloser/weight_coaster

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Board for Power Converter TPS61092

author: LuckyResistor
Top
Bottom

2 layer board of 1.10 x 0.59 inches (28.0 x 15.0 mm)
Uploaded: February 25, 2018
Shared: March 17, 2018
Total Price: $3.25

A very small test board for the TPS61092 boost converter.

See the BOM here

A very small test board for the TPS61092 boost converter.

See the BOM here

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GFS16 - 16mm FET Board Rev A

author: loneoceanslabs
Top
Bottom

2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded: March 01, 2018
Shared: March 17, 2018
Total Price: $1.95

Order together with 18mm LED board Rev A, this board has no bottom silkscreen. www.loneoceans.com/labs/

Order together with 18mm LED board Rev A, this board has no bottom silkscreen. www.loneoceans.com/labs/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GFS16 - 18mm LED Board Rev A

author: loneoceanslabs
Top
Bottom

2 layer board of 0.71 x 0.71 inches (18.1 x 18.1 mm)
Uploaded: March 17, 2018
Shared: March 17, 2018
Total Price: $2.50

Order together with GFS16 - 16mm FET Board.

Order together with GFS16 - 16mm FET Board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

backpack.kicad_pcb

author: marsairforce
Top
Bottom

2 layer board of 0.61 x 1.71 inches (15.4 x 43.3 mm)
Uploaded: March 17, 2018
Shared: March 17, 2018
Total Price: $5.15

A serial LCD backpack using 74HC595 shift register

See Also

Project page and Arduino library here: https://github.com/marsairforce/serial_595_lcd

BOM

  • 1x 74HC595
  • 1x 10K pot
  • 1x 1K pot
  • 1x 5 pos pin header

And then the pin header on the LCD module we solder this onto.

A serial LCD backpack using 74HC595 shift register

See Also

Project page and Arduino library here: https://github.com/marsairforce/serial_595_lcd

BOM

  • 1x 74HC595
  • 1x 10K pot
  • 1x 1K pot
  • 1x 5 pos pin header

And then the pin header on the LCD module we solder this onto.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TB67S109A Stepper Driver Breakout Rev. B

author: qwertyboy
Top
Bottom

2 layer board of 2.00 x 2.00 inches (50.8 x 50.8 mm)
Uploaded: March 17, 2018
Shared: March 17, 2018
Total Price: $20.00

Breakout board for the Toshiba TB67S109A stepper motor driver IC. The solder jumper is to select power sources for the logic supply. It defaults to the regulated voltage from the motor power terminal.

Part Value Package
C1 0.1uF 0603
C2 0.1uF …

Show full description

Breakout board for the Toshiba TB67S109A stepper motor driver IC. The solder jumper is to select power sources for the logic supply. It defaults to the regulated voltage from the motor power terminal.

Part Value Package
C1 0.1uF 0603
C2 0.1uF …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

16x16F7 1.1

author: RicoKirstein
Top
Bottom

4 layer board of 0.83 x 0.83 inches (21.1 x 21.1 mm)
Uploaded: March 16, 2018
Shared: March 16, 2018
Total Price: $6.80

16x16mm F7 Flight controller 3 full UARTS 1 only TX some 5V and GND solder pads OSD Camera control pad

16x16mm F7 Flight controller 3 full UARTS 1 only TX some 5V and GND solder pads OSD Camera control pad

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduboy Hat Beta

author: NullMember
Top
Bottom

2 layer board of 2.37 x 0.95 inches (60.1 x 24.1 mm)
Uploaded: March 16, 2018
Shared: March 16, 2018
Total Price: $11.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OMSI - Shake Table sale

author: hydronics
Top
Bottom

2 layer board of 3.34 x 3.75 inches (84.8 x 95.2 mm)
Uploaded: March 16, 2018
Shared: March 16, 2018
Total Price: $62.55

Arduino Shield for an isolated PWM output to a motor controller, enable motor, and local lighting control

Arduino Shield for an isolated PWM output to a motor controller, enable motor, and local lighting control

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy