Shared Projects

Shared Projects

rc2014-spiv2.2

author: lbmgmusic
Top
Bottom

2 layer board of 4.02 x 2.00 inches (102.0 x 50.7 mm)
Uploaded: July 05, 2018
Shared: July 05, 2018
Total Price: $40.05

SPI bus board for rc12014

SPI bus board for rc12014

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pololu_servocontroller_3

author: brownaa
Top
Bottom

2 layer board of 3.00 x 2.99 inches (76.2 x 75.9 mm)
Uploaded: July 05, 2018
Shared: July 05, 2018
Total Price: $44.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

G5 Mini Charger_v2

author: mzst
Top
Bottom

2 layer board of 0.33 x 0.54 inches (8.3 x 13.8 mm)
Uploaded: June 30, 2018
Shared: July 05, 2018
Total Price: $0.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WeMos D1 Mini WS2812 driving board

author: Dumle29
Top
Bottom

2 layer board of 1.04 x 1.25 inches (26.5 x 31.7 mm)
Uploaded: July 04, 2018
Shared: July 04, 2018
Total Price: $6.50

This board is used to drive two strips of WS2812 LEDs from a WeMos D1 Mini, with the appropriate level-shifting.

source here: https://git.io/7sPCB

This board is used to drive two strips of WS2812 LEDs from a WeMos D1 Mini, with the appropriate level-shifting.

source here: https://git.io/7sPCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TI_AmpsTRF

author: G.Alcaraz
Top
Bottom

4 layer board of 1.10 x 1.22 inches (27.9 x 31.0 mm)
Uploaded: July 04, 2018
Shared: July 04, 2018
Total Price: $13.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESC_2S

author: CraigHB
Top
Bottom

2 layer board of 0.85 x 1.13 inches (21.6 x 28.8 mm)
Uploaded: July 24, 2016
Shared: July 04, 2018
Total Price: $4.80

2S ESC

2S ESC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nintendo Switch Joystick Breakout Board

author: GingerOfOz
Top
Bottom

2 layer board of 0.39 x 0.34 inches (9.9 x 8.7 mm)
Uploaded: May 19, 2018
Shared: July 04, 2018
Total Price: $0.65

A breakout board for Nintendo Switch joysticks

A breakout board for Nintendo Switch joysticks

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Kiosek LED board

author: NCR_Kiosek_LED
Top
Bottom

2 layer board of 7.91 x 0.40 inches (200.8 x 10.2 mm)
Uploaded: July 04, 2018
Shared: July 04, 2018
Total Price: $15.80

LED board for Kiosek solution. Rev_B

LED board for Kiosek solution. Rev_B

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LambdaBoard for Amstrad / Schneider CPC

author: LambdaMikel
Top
Bottom

2 layer board of 3.76 x 3.01 inches (95.4 x 76.4 mm)
Uploaded: June 20, 2018
Shared: July 03, 2018
Total Price: $56.45

A MX4-compatible CPC expansion board backplane for the Amstrad / Schneider CPC. Unlike similar expansion boards (e.g., MotherX4), LambdaBoard supports edge connector-based hardware (DD1, DDI3, DKtronics speech synthesizer, SSA-1 speech synthesizer, …)

The PCB tracks are extra-thick, for g…

Show full description

A MX4-compatible CPC expansion board backplane for the Amstrad / Schneider CPC. Unlike similar expansion boards (e.g., MotherX4), LambdaBoard supports edge connector-based hardware (DD1, DDI3, DKtronics speech synthesizer, SSA-1 speech synthesizer, …)

The PCB tracks are extra-thick, for g…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EZTP8_18

author: bpennkast
Top
Bottom

2 layer board of 2.26 x 1.01 inches (57.3 x 25.6 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $11.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley Meyer SCR Gerber NEW PCB makes gate and brings in hv dc from variac

author: SecureSupplies
Top
Bottom

2 layer board of 3.91 x 2.29 inches (99.3 x 58.2 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $44.80

Stanley Meyer SCR Gerber NEW PCB makes gate and brings in hv dc from variac See the 8xa 9xb scr in the patents Makes Water fuel
scr part list KBU808G bridged rectifier 100 ohm resistor (20 watt or so) S4025L (or simular use a heat sink and make sure the pin out matches) 1N4007 diode…

Show full description

Stanley Meyer SCR Gerber NEW PCB makes gate and brings in hv dc from variac See the 8xa 9xb scr in the patents Makes Water fuel
scr part list KBU808G bridged rectifier 100 ohm resistor (20 watt or so) S4025L (or simular use a heat sink and make sure the pin out matches) 1N4007 diode…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mcp73871 breakout

author: DaMaster_Architect
Top
Bottom

2 layer board of 0.85 x 1.08 inches (21.6 x 27.5 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $4.60

A breadboard compatible breakout board for the MCP73871 battery charging chip. The design is based on the Adafruit solar charger.

Note: PROG1 and THERM pins are broken out. External resistors need to be connected to these pins for the circuit to work. See the MCP73871 datasheet for more info o…

Show full description

A breadboard compatible breakout board for the MCP73871 battery charging chip. The design is based on the Adafruit solar charger.

Note: PROG1 and THERM pins are broken out. External resistors need to be connected to these pins for the circuit to work. See the MCP73871 datasheet for more info o…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nixie power supply

author: esynr3z
Top
Bottom

2 layer board of 1.82 x 0.91 inches (46.2 x 23.2 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $8.25

Nixie HV power supply. 5-12V to 180V 20mA.

Nixie HV power supply. 5-12V to 180V 20mA.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Atten 858D+ Holtek to Atmega

author: cn
Top
Bottom

2 layer board of 1.29 x 1.55 inches (32.7 x 39.3 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $9.95

Add a TQFP Atmega 168 in place of the Holtek HT46R23 in an older Atten 858D+

Firmware

Add a TQFP Atmega 168 in place of the Holtek HT46R23 in an older Atten 858D+

Firmware

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_10 BAND RESONANT EQ PCB

author: Chillums
Top
Bottom

2 layer board of 3.61 x 3.86 inches (91.7 x 98.1 mm)
Uploaded: June 25, 2018
Shared: July 03, 2018
Total Price: $69.70

10 Band Resonant Equalizer

10 Band Resonant Equalizer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_BF-2 FLANGER COMPLETE_20180703133326

author: Chillums
Top
Bottom

2 layer board of 3.41 x 3.41 inches (86.6 x 86.6 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $58.15

NOT VERIFIED… ANYONE WILLING TO TAKE THE CHANCE

NOT VERIFIED… ANYONE WILLING TO TAKE THE CHANCE

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IBT2_Booster

author: BKB
Top
Bottom

2 layer board of 1.96 x 1.96 inches (49.8 x 49.7 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $19.15

Interface for DCC Booster with IBT2 You can use wired or smd 0805 Parts. Partlist : IC1=7805; Ok1=6N137; D1=1N4148; D2=1N4001; Heatsink SK13/35 wired parts: C1, C2, C3= 100n/25V RM2,5; Led1= 3mm; R1, R3= 1k5 0207; R2, R4= 390R 0207; R5= 560R 0207; T1= BC547 or smd-parts 0805 C11, C12, C13=…

Show full description

Interface for DCC Booster with IBT2 You can use wired or smd 0805 Parts. Partlist : IC1=7805; Ok1=6N137; D1=1N4148; D2=1N4001; Heatsink SK13/35 wired parts: C1, C2, C3= 100n/25V RM2,5; Led1= 3mm; R1, R3= 1k5 0207; R2, R4= 390R 0207; R5= 560R 0207; T1= BC547 or smd-parts 0805 C11, C12, C13=…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AD9912_DDS

author: LPF
Top
Bottom

2 layer board of 3.72 x 1.49 inches (94.6 x 37.8 mm)
Uploaded: January 28, 2015
Shared: July 03, 2018
Total Price: $27.65

AD9912 DDS VFO

AD9912 DDS VFO

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amiga Kickstart switch

author: jensma
Top
Bottom

2 layer board of 0.70 x 2.01 inches (17.8 x 50.9 mm)
Uploaded: June 13, 2018
Shared: July 03, 2018
Total Price: $7.00

Tested and working!

https://www.forum64.de/index.php?thread/82813-a500-rom-switcher/&postID=1277808#post1277808

Tested and working!

https://www.forum64.de/index.php?thread/82813-a500-rom-switcher/&postID=1277808#post1277808

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

argsoc

author: speexvocon
Top
Bottom

2 layer board of 2.01 x 2.01 inches (51.0 x 51.0 mm)
Uploaded: July 03, 2018
Shared: July 03, 2018
Total Price: $20.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy