2 layer board of 1.01 x 1.35 inches (25.7 x 34.3 mm)
Uploaded:
April 24th 2018
Shared:
September 25th 2018
Total Price:
$6.80
An L293D based simple motor controller board for the Wemos D1 Mini.
Note: There is no reverse-polarity protection …
An L293D based simple motor controller board for the Wemos D1 Mini.
Note: There is no reverse-polarity protection on this board. Make sure you wire the power in the right way!
Note: The silkscreen shows ‘L298D’ wheareas the chip to be used is a ‘L293D’
More information and BOM can be found here: https://averagemaker.com/2018/09/wemoto-wemos-motor-controller.html
An L293D based simple motor controller board for the Wemos D1 Mini.
Note: There is no reverse-polarity protection …
An L293D based simple motor controller board for the Wemos D1 Mini.
Note: There is no reverse-polarity protection on this board. Make sure you wire the power in the right way!
Note: The silkscreen shows ‘L298D’ wheareas the chip to be used is a ‘L293D’
More information and BOM can be found here: https://averagemaker.com/2018/09/wemoto-wemos-motor-controller.html
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
