Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Charger Power Switchplate KiCad

author: UWACN
Top
Bottom

2 layer board of 1.46 x 0.44 inches (37.2 x 11.2 mm)
Uploaded: March 13, 2019
Shared: March 15, 2019
Total Price: $3.20

Single cell Li-Ion charger and power switch.

Single cell Li-Ion charger and power switch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

snc98_Display_15x7-Seg_3-digit_LTD056

author: Jens_G
Top
Bottom

2 layer board of 7.48 x 1.33 inches (190.0 x 33.8 mm)
Uploaded: March 15, 2019
Shared: March 15, 2019
Total Price: $49.75

snc98_Display_15x7-Segment_3-digit_LTD056_v1.2

snc98_Display_15x7-Segment_3-digit_LTD056_v1.2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Li Ion Battery Charger With USB A Connector

author: rupin
Top
Bottom

2 layer board of 0.66 x 0.63 inches (16.7 x 16.0 mm)
Uploaded: March 07, 2019
Shared: March 15, 2019
Total Price: $2.05

TPA4056 based Li Ion Battery Charger.

This used a standard USB A Male connector to be charged through a Battery Bank or Wall plug.

BOM

USB_A is USB Male Through Hole Connector

CProg, 0603 resistor 10k (for 130mA charging current) or 3k ( for 400mA charging current). Decide on va…

Show full description

TPA4056 based Li Ion Battery Charger.

This used a standard USB A Male connector to be charged through a Battery Bank or Wall plug.

BOM

USB_A is USB Male Through Hole Connector

CProg, 0603 resistor 10k (for 130mA charging current) or 3k ( for 400mA charging current). Decide on va…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ghett-iO Lights Board

author: kathysrazor
Top
Bottom

2 layer board of 2.61 x 1.71 inches (66.3 x 43.5 mm)
Uploaded: March 15, 2019
Shared: March 15, 2019
Total Price: $22.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cylon_Eye_V3.3A_SMD_Version

author: RVProject
Top
Bottom

2 layer board of 7.96 x 0.96 inches (202.2 x 24.4 mm)
Uploaded: March 13, 2019
Shared: March 14, 2019
Total Price: $38.25

alt text

V3.3A for RV-Project's Cylon Eye. See:

http://www.rv-project.com/projects/cyloneye.php

for construction details, Bill-of-Materials and videos. Be sure to specify 2OZ Copper or the board will be too thick to fi…

Show full description

alt text

V3.3A for RV-Project's Cylon Eye. See:

http://www.rv-project.com/projects/cyloneye.php

for construction details, Bill-of-Materials and videos. Be sure to specify 2OZ Copper or the board will be too thick to fi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

D1 mini joypad

author: deshipu
Top
Bottom

2 layer board of 2.50 x 0.80 inches (63.5 x 20.4 mm)
Uploaded: January 12, 2019
Shared: March 14, 2019
Total Price: $10.05

An analog joypad shield for D1 mini ESP8266 board.

An analog joypad shield for D1 mini ESP8266 board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3.3V power from USB

author: deshipu
Top
Bottom

2 layer board of 0.41 x 0.48 inches (10.5 x 12.2 mm)
Uploaded: February 14, 2019
Shared: March 14, 2019
Total Price: $0.95

Perfect for plugging into a breadboard.

Perfect for plugging into a breadboard.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

D1 Mini Expander Shield

author: deshipu
Top
Bottom

2 layer board of 1.00 x 0.80 inches (25.4 x 20.4 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $4.00

https://hackaday.io/project/27566-d1-mini-expander-shield

https://hackaday.io/project/27566-d1-mini-expander-shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Attiny10 Programming Board

author: SanchoC
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.1 x 20.1 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $3.10

Attiny10 Programming Board is a tiny board for programming Attiny10 MCU into two programming modes. The slide swith (SW1) controls programming modes. The upper position of the switch is a high voltage (12V) serial programming mode. The downer position of the switch is a TPI programming mode. You…

Show full description

Attiny10 Programming Board is a tiny board for programming Attiny10 MCU into two programming modes. The slide swith (SW1) controls programming modes. The upper position of the switch is a high voltage (12V) serial programming mode. The downer position of the switch is a TPI programming mode. You…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB-oscope

author: Firefly
Top
Bottom

2 layer board of 3.94 x 3.15 inches (100.0 x 80.0 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $62.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RoboHAT for Raspberry Pi Zero W v3

author: gcurtis79
Top
Bottom

2 layer board of 2.57 x 1.19 inches (65.3 x 30.2 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $15.30

Robot controller board for Raspberry Pi (Zero W)

  • 4 motors
  • 4 servos
  • Battery voltage divider/monitor
  • 6-DOF IMU (MPU6050)
  • Pi <-> Arduino Communication via I2C, SPI, and UART (Serial)

Components used:

  • 2x MX1508 Motor Driver IC
  • 2x 4.7K SMT Re…

Show full description

Robot controller board for Raspberry Pi (Zero W)

  • 4 motors
  • 4 servos
  • Battery voltage divider/monitor
  • 6-DOF IMU (MPU6050)
  • Pi <-> Arduino Communication via I2C, SPI, and UART (Serial)

Components used:

  • 2x MX1508 Motor Driver IC
  • 2x 4.7K SMT Re…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

coolBeacon

author: night_ghost
Top
Bottom

2 layer board of 1.21 x 0.91 inches (30.6 x 23.0 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $5.45

board for project http://www.ykoctpa.ru/groups/eye-in-a-sky/forum/topic/eshhe-odin-treker-dlya-bespilotnika/ Revision 7

board for project http://www.ykoctpa.ru/groups/eye-in-a-sky/forum/topic/eshhe-odin-treker-dlya-bespilotnika/ Revision 7

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4030077

author: gvisser
Top
Bottom

2 layer board of 2.84 x 2.84 inches (72.2 x 72.2 mm)
Uploaded: March 14, 2019
Shared: March 14, 2019
Total Price: $40.40

Power and control connection board for STAR FCS 2019 tests

Power and control connection board for STAR FCS 2019 tests

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4030075

author: gvisser
Top
Bottom

2 layer board of 3.20 x 3.20 inches (81.2 x 81.2 mm)
Uploaded: February 27, 2019
Shared: March 14, 2019
Total Price: $51.10

Voltage divider and mounting board for Hamamatsu R14374 photomultiplier tube. (It is not empty, that is some kind of "feature" due to board outline or cutout in this design.)

Voltage divider and mounting board for Hamamatsu R14374 photomultiplier tube. (It is not empty, that is some kind of "feature" due to board outline or cutout in this design.)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB 2032 Base

author: BRIAN-lOUGH
Top
Bottom

2 layer board of 0.80 x 0.80 inches (20.3 x 20.3 mm)
Uploaded: March 13, 2019
Shared: March 14, 2019
Total Price: $3.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB 2032 Micro USB

author: BRIAN-lOUGH
Top
Bottom

2 layer board of 0.80 x 0.80 inches (20.3 x 20.3 mm)
Uploaded: March 13, 2019
Shared: March 14, 2019
Total Price: $3.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

YSK900 Replacement

author: AE7EU
Top
Bottom

2 layer board of 0.95 x 0.85 inches (24.2 x 21.7 mm)
Uploaded: March 13, 2019
Shared: March 13, 2019
Total Price: $4.05

A replacement combined with a simple 3d-printed piece of PLA to act as a remote head cable for an FT900. I will be derogatory to yaesu since I can't get parts for this radio anymore.

Primary STL File for the back of the radio tbd Primary STL File for the remote head mount tbd Primary STL fi…

Show full description

A replacement combined with a simple 3d-printed piece of PLA to act as a remote head cable for an FT900. I will be derogatory to yaesu since I can't get parts for this radio anymore.

Primary STL File for the back of the radio tbd Primary STL File for the remote head mount tbd Primary STL fi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PC Engine TurboPad Controller Board, through hole, Rev. B

author: skum
Top
Bottom

2 layer board of 2.11 x 1.45 inches (53.7 x 36.9 mm)
Uploaded: January 21, 2019
Shared: March 13, 2019
Total Price: $15.35

A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.

Based on the schematics found here: http://www.webalice.it/cicciopetito/

![Dat image tho…](https://immerhax.com/wp-content/uploads/2019/01/pce-controller-breakout-tht1.png "R…

Show full description

A through hole circuit of the TurboPad for the NEC PC Engine (or TurboGrafx 16). This version is fixed and tested.

Based on the schematics found here: http://www.webalice.it/cicciopetito/

![Dat image tho…](https://immerhax.com/wp-content/uploads/2019/01/pce-controller-breakout-tht1.png "R…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

proto1.kicad_pcb

author: pratsriv
Top
Bottom

2 layer board of 1.38 x 1.38 inches (35.2 x 35.2 mm)
Uploaded: March 13, 2019
Shared: March 13, 2019
Total Price: $9.55

light sensor

light sensor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VIC II Adapter Board

author: antongale
Top
Bottom

2 layer board of 0.96 x 2.11 inches (24.3 x 53.5 mm)
Uploaded: March 13, 2019
Shared: March 13, 2019
Total Price: $10.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy