Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

ledconnector-v2.kicad_pcb

author: luz
Top
Bottom

2 layer board of 4.34 x 1.35 inches (110.2 x 34.2 mm)
Uploaded: July 31, 2018
Shared: March 20, 2019
Total Price: $29.15

WS2813 LED connector board, designed for high current (30A, 500 LEDs)

WS2813 LED connector board, designed for high current (30A, 500 LEDs)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ledcontroller-v2.kicad_pcb

author: luz
Top
Bottom

2 layer board of 3.57 x 2.21 inches (90.6 x 56.1 mm)
Uploaded: July 31, 2018
Shared: March 20, 2019
Total Price: $39.35

LED chain (WS281x) + LED light (PWM) controller based on Omega2S, with Ethernet + USB

LED chain (WS281x) + LED light (PWM) controller based on Omega2S, with Ethernet + USB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MicroPCB

author: EA4HCD
Top
Bottom

2 layer board of 0.97 x 0.69 inches (24.7 x 17.6 mm)
Uploaded: February 03, 2019
Shared: March 20, 2019
Total Price: $3.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PID BreakoutV1.2

author: kkoerner
Top
Bottom

2 layer board of 1.30 x 0.91 inches (33.0 x 23.0 mm)
Uploaded: December 27, 2018
Shared: March 20, 2019
Total Price: $5.85

Added mounting notches and holes

Added mounting notches and holes

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mobile PMS5003V1_3

author: kkoerner
Top
Bottom

2 layer board of 3.22 x 2.12 inches (81.7 x 53.8 mm)
Uploaded: March 07, 2019
Shared: March 20, 2019
Total Price: $34.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

aiken 13

author: njkmonty
Top
Bottom

2 layer board of 1.86 x 1.66 inches (47.2 x 42.2 mm)
Uploaded: April 05, 2015
Shared: March 20, 2019
Total Price: $15.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3PDT 1590A.kicad_pcb

author: StrangeDesignsLLC
Top
Bottom

2 layer board of 1.06 x 0.95 inches (26.8 x 24.0 mm)
Uploaded: June 22, 2018
Shared: March 20, 2019
Total Price: $4.95

3pdt nopop

3pdt nopop

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Aquavision headerv5 - CADCAM

author: SAMDEE21
Top
Bottom

2 layer board of 1.05 x 1.24 inches (26.7 x 31.6 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $6.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

screw_board

author: sf29
Top
Bottom

2 layer board of 1.78 x 2.94 inches (45.2 x 74.7 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $26.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1616test

author: staticx57
Top
Bottom

2 layer board of 0.61 x 0.61 inches (15.4 x 15.4 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $1.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tot_vr_robotic_arm

author: mrswirlyeyes
Top
Bottom

4 layer board of 2.35 x 2.28 inches (59.7 x 57.9 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $53.60

Rev 3

Rev 3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tot_vr_touch_glove

author: mrswirlyeyes
Top
Bottom

4 layer board of 3.15 x 1.51 inches (80.0 x 38.5 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $47.60

Rev 3

Rev 3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tot_vr_electrotactile_extension

author: mrswirlyeyes
Top
Bottom

4 layer board of 3.15 x 1.63 inches (80.0 x 41.4 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $51.40

Rev 3

Rev 3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RMS MOD

author: Acme-Software-Works
Top
Bottom

2 layer board of 1.00 x 1.08 inches (25.5 x 27.4 mm)
Uploaded: April 03, 2016
Shared: March 19, 2019
Total Price: $5.40

RMS and A to D for current sensing

RMS and A to D for current sensing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GF2 (Rev. A)

author: bloguetronica
Top
Bottom

4 layer board of 3.15 x 2.19 inches (80.0 x 55.5 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $68.80

Function generator

Function generator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ff555

author: ted.yapo
Top
Bottom

2 layer board of 0.70 x 0.70 inches (17.8 x 17.8 mm)
Uploaded: March 02, 2019
Shared: March 19, 2019
Total Price: $2.40

Fast 555-like timer circuit built from ADCMP600 comparators and 74LVC2G02 NOR gates.

See hackaday.io project page for more details.

Bill-of-materials (2) ADCMP600 Comparators, SOT23-5 package (1) 74LCV2G02 dual NOR gate, TSSOP8 package (2) 3k 0…

Show full description

Fast 555-like timer circuit built from ADCMP600 comparators and 74LVC2G02 NOR gates.

See hackaday.io project page for more details.

Bill-of-materials (2) ADCMP600 Comparators, SOT23-5 package (1) 74LCV2G02 dual NOR gate, TSSOP8 package (2) 3k 0…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RetroPad v1

author: jtgans
Top
Bottom

2 layer board of 4.93 x 1.78 inches (125.2 x 45.2 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $43.80

This is an open source Commodore compatible gamepad similar in design to a Genesis or NES gamepad, but designed specifically for the Commodore and Atari 8-bit machines prior to the Amigas.

This is the original v1.0 version of the design. This one has a switch embedded between the D-pad up butt…

Show full description

This is an open source Commodore compatible gamepad similar in design to a Genesis or NES gamepad, but designed specifically for the Commodore and Atari 8-bit machines prior to the Amigas.

This is the original v1.0 version of the design. This one has a switch embedded between the D-pad up butt…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Firefly.v01

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.71 inches (17.9 x 43.3 mm)
Uploaded: March 19, 2019
Shared: March 19, 2019
Total Price: $12.00

STM32WB55CG (QFN-48) BLE 5.0 development board with pcb antenna, SMPS circuitry, USB hot-detect, battery voltage monitor, 21 GPIOs, and tag connect. Intended programming mode is via USB connector using Arduino IDE, but SWD port also exposed for ST LINK V2.

STM32WB55CG (QFN-48) BLE 5.0 development board with pcb antenna, SMPS circuitry, USB hot-detect, battery voltage monitor, 21 GPIOs, and tag connect. Intended programming mode is via USB connector using Arduino IDE, but SWD port also exposed for ST LINK V2.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp_lights.kicad_pcb

author: rmd6502
Top
Bottom

2 layer board of 2.00 x 1.71 inches (50.8 x 43.4 mm)
Uploaded: March 18, 2019
Shared: March 18, 2019
Total Price: $17.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

G-Scale track data car, version 1.2

author: mtrcycllvr
Top
Bottom

2 layer board of 4.45 x 2.00 inches (113.1 x 50.8 mm)
Uploaded: March 18, 2019
Shared: March 18, 2019
Total Price: $44.55

A "backplane" that supports a Teensy 3.2, an ILI9341 TFT display and a capacitive encoder along with a few small peripherals like a buzzer and FRAM to store persistent data.. The goal is to use the encoder data in useful or just entertaining ways.

This version corrects package profiles for th…

Show full description

A "backplane" that supports a Teensy 3.2, an ILI9341 TFT display and a capacitive encoder along with a few small peripherals like a buzzer and FRAM to store persistent data.. The goal is to use the encoder data in useful or just entertaining ways.

This version corrects package profiles for th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy