Open Kicksticker "Lazy Porter" Rev 1.2002
author: dedgrant
2 layer board of 1.68 x 2.33 inches (42.6 x 59.2 mm)
Uploaded:
February 22, 2020
Shared:
February 22, 2020
Total Price:
$19.55
This is a latching quad 27C160 Kickstart switcher designed to socket into the Amiga 500+ motherboard.
Source and BOM:
https://github.com/Kludgy/openkicksticker
This is a latching quad 27C160 Kickstart switcher designed to socket into the Amiga 500+ motherboard.
Source and BOM:
https://github.com/Kludgy/openkicksticker
Open 6810 Doubler for the Atari 1050 Disk Drive
author: dedgrant
2 layer board of 1.58 x 1.35 inches (40.1 x 34.4 mm)
Uploaded:
February 21, 2020
Shared:
February 21, 2020
Total Price:
$10.65
Doubles the available SRAM from 128- to 256-bytes when used with a custom ROM.
KiCad source and BOM:
https://github.com/Kludgy/open6810doubler
Detailed theory of operation:
http://blog.3b2.sk/igi/post/Atari-1050-ICD-US-doubler.aspx
Doubles the available SRAM from 128- to 256-bytes when used with a custom ROM.
KiCad source and BOM:
https://github.com/Kludgy/open6810doubler
Detailed theory of operation:
http://blog.3b2.sk/igi/post/Atari-1050-ICD-US-doubler.aspx
21022020_EStopPen_Files
author: TravisCraig
2 layer board of 1.35 x 2.18 inches (34.3 x 55.3 mm)
Uploaded:
February 21, 2020
Shared:
February 21, 2020
Total Price:
$14.65
Noval_breadboard_adapter.kicad_pcb
author: donpivo
2 layer board of 1.76 x 1.03 inches (44.8 x 26.1 mm)
Uploaded:
February 05, 2020
Shared:
February 21, 2020
Total Price:
$9.00
Breadboard adapter for vacuum tubes with noval socket.
Breadboard adapter for vacuum tubes with noval socket.
Switch Rat V1
author: NTFX
2 layer board of 2.31 x 1.70 inches (58.7 x 43.1 mm)
Uploaded:
February 21, 2020
Shared:
February 21, 2020
Total Price:
$19.60
A basic Proco Rat layout with the ability to switch between two ICs. Email me at [email protected] for the BOM, questions, etc
A basic Proco Rat layout with the ability to switch between two ICs. Email me at [email protected] for the BOM, questions, etc
hk-datetime-com
author: Bodger
2 layer board of 11.91 x 1.28 inches (302.6 x 32.4 mm)
Uploaded:
September 13, 2018
Shared:
February 20, 2020
Total Price:
$75.90
HK16K33 based Back to the Future time display board with alphanumeric date, time, AM/PM, colon, keypad support, and auxiliary LEDs.
HK16K33 based Back to the Future time display board with alphanumeric date, time, AM/PM, colon, keypad support, and auxiliary LEDs.
Gameboy Socket tester
author: ABrugsch
2 layer board of 2.07 x 0.75 inches (52.6 x 19.1 mm)
Uploaded:
November 18, 2018
Shared:
February 20, 2020
Total Price:
$7.75
If you order a set of these, please consider buying me a coffee Indicator LED board for testing activity on a gameboy (or GBA) cartridge socket. LED's are 0603 size and resistor arrays are 4x 0603
If you order a set of these, please consider buying me a coffee Indicator LED board for testing activity on a gameboy (or GBA) cartridge socket. LED's are 0603 size and resistor arrays are 4x 0603
ESPEye.v01a
author: PeskyProducts
4 layer board of 1.18 x 1.18 inches (30.0 x 30.0 mm)
Uploaded:
February 20, 2020
Shared:
February 20, 2020
Total Price:
$13.90
ESP32 PICO D4 with OV2640 camera, stereo ICS43434 I2S microphones, and SDIO card reader for data capture. Based on the ESP32Eye. Added pullup to pin 2 so SD card reader will work.
ESP32 PICO D4 with OV2640 camera, stereo ICS43434 I2S microphones, and SDIO card reader for data capture. Based on the ESP32Eye. Added pullup to pin 2 so SD card reader will work.
QStat_Interface_XB_3
author: cjb008
2 layer board of 0.86 x 0.84 inches (21.7 x 21.3 mm)
Uploaded:
February 20, 2020
Shared:
February 20, 2020
Total Price:
$3.55
3.6mm pogo pin center to center spacing on top, standard 1.8mm on bottom
3.6mm pogo pin center to center spacing on top, standard 1.8mm on bottom
