Shared Projects

Shared Projects

Nunchuck Breakout V2

author: BRIAN-lOUGH
Top
Bottom

2 layer board of 0.89 x 0.27 inches (22.5 x 7.0 mm)
Uploaded: February 17, 2020
Shared: February 17, 2020
Total Price: $1.20

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Slighter narrower than previous version, but it will still need to be filed to remove the panel tabs

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Slighter narrower than previous version, but it will still need to be filed to remove the panel tabs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

backplate.kicad_pcb

author: fustini
Top
Bottom

2 layer board of 1.70 x 1.70 inches (43.1 x 43.1 mm)
Uploaded: February 12, 2020
Shared: February 17, 2020
Total Price: $14.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QuadADC v3

author: liamcohen
Top
Bottom

4 layer board of 6.30 x 3.94 inches (160.0 x 100.0 mm)
Uploaded: February 17, 2020
Shared: February 17, 2020
Total Price: $248.00

4 channel, 16-bit, differential ADC

4 channel, 16-bit, differential ADC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5x5clone

author: TinLethax
Top
Bottom

2 layer board of 1.56 x 0.59 inches (39.6 x 15.1 mm)
Uploaded: January 15, 2020
Shared: February 17, 2020
Total Price: $4.60

5x5 LED matrix clone of the OSRAM 5x5 LED display ( Without RAM, Multiplexer; Board only). Require 100 of 0402 LEDs

5x5 LED matrix clone of the OSRAM 5x5 LED display ( Without RAM, Multiplexer; Board only). Require 100 of 0402 LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OSHPark_4Layers_trl-board_v0_1_16Feb2020

author: hydrabus
Top
Bottom

4 layer board of 3.00 x 3.50 inches (76.2 x 88.9 mm)
Uploaded: February 16, 2020
Shared: February 17, 2020
Total Price: $104.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

YMF262 OPL3 Breakout

author: pugbutt
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.8 x 30.5 mm)
Uploaded: February 16, 2020
Shared: February 17, 2020
Total Price: $4.20

Just the chip, an 0603 cap (0.1 uF), and a CSX-750F oscillator (14.31818 MHz)

Just the chip, an 0603 cap (0.1 uF), and a CSX-750F oscillator (14.31818 MHz)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sally-adapter-u1mb-xl

author: devzine
Top
Bottom

2 layer board of 0.93 x 2.02 inches (23.7 x 51.4 mm)
Uploaded: February 17, 2020
Shared: February 17, 2020
Total Price: $9.40

Adapter to directly connect the Ultimate1MB module to the 6502C (Sally) processor in the Atari XL computer.

I offer a fully assembled adapter with a precision socket: [https://www.tindie.com/products/devzine_pl/sally-adapter-for-atari-xl/](https://www.tindie.com/products/devzine_pl/sally-adap…

Show full description

Adapter to directly connect the Ultimate1MB module to the 6502C (Sally) processor in the Atari XL computer.

I offer a fully assembled adapter with a precision socket: [https://www.tindie.com/products/devzine_pl/sally-adapter-for-atari-xl/](https://www.tindie.com/products/devzine_pl/sally-adap…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SPLITTER/BLENDER

author: jfann
Top
Bottom

2 layer board of 1.00 x 0.98 inches (25.4 x 24.9 mm)
Uploaded: July 02, 2019
Shared: February 17, 2020
Total Price: $4.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FremoLNShield_gnd.brd

author: wassi
Top
Bottom

2 layer board of 2.09 x 2.35 inches (53.0 x 59.7 mm)
Uploaded: September 15, 2017
Shared: February 17, 2020
Total Price: $24.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

astrohat-v1.1

author: pierros
Top
Bottom

2 layer board of 3.33 x 2.23 inches (84.6 x 56.6 mm)
Uploaded: February 16, 2020
Shared: February 17, 2020
Total Price: $37.10

RaspberryPi HAT for astronomy setups

https://gitlab.com/pierros/astrohat

RaspberryPi HAT for astronomy setups

https://gitlab.com/pierros/astrohat

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SHVC-1L5B-20 SNES SA1 Cartridge PCB

author: Arthrimus
Top
Bottom

2 layer board of 4.02 x 2.76 inches (102.1 x 70.2 mm)
Uploaded: February 16, 2020
Shared: February 16, 2020
Total Price: $55.50

A reproduction of the SHVC-1L5B-20 PCB used in some SA1 games. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

A reproduction of the SHVC-1L5B-20 PCB used in some SA1 games. Perfect for Gradius III SA1 conversions, provided you can source an SA1 chip.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

blinds_motor_driver.kicad_pcb

author: sidoh
Top
Bottom

2 layer board of 2.17 x 2.96 inches (55.1 x 75.1 mm)
Uploaded: February 16, 2020
Shared: February 16, 2020
Total Price: $32.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TOP V3.zip

author: Morpheus1979
Top
Bottom

2 layer board of 3.94 x 0.58 inches (100.0 x 14.7 mm)
Uploaded: December 02, 2017
Shared: February 16, 2020
Total Price: $11.40

Top

Top

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A

author: Morpheus1979
Top
Bottom

2 layer board of 3.94 x 1.58 inches (100.0 x 40.1 mm)
Uploaded: December 02, 2017
Shared: February 16, 2020
Total Price: $31.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

iG-Lipo-Battery-Guage-MB

author: makho
Top
Bottom

2 layer board of 0.92 x 0.54 inches (23.4 x 13.8 mm)
Uploaded: November 12, 2019
Shared: February 16, 2020
Total Price: $2.45

Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/lczB1jHZ

Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/lczB1jHZ

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Battery Gauge LED Board_big

author: makho
Top
Bottom

2 layer board of 1.40 x 0.25 inches (35.6 x 6.4 mm)
Uploaded: October 13, 2019
Shared: February 16, 2020
Total Price: $1.75

Slightly tweaked version of the LED board from https://github.com/insidegadgets/LiPo-Battery-Gauge to fit with OSHpark's minimum size requirements. Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/5IOiieSn

Slightly tweaked version of the LED board from https://github.com/insidegadgets/LiPo-Battery-Gauge to fit with OSHpark's minimum size requirements. Please see https://github.com/makhowastaken/iG-LiPo-Battery-Gauge for more info. Goes nicely with https://oshpark.com/shared_projects/5IOiieSn

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

XFM

author: skeld
Top
Bottom

2 layer board of 1.66 x 2.58 inches (42.1 x 65.6 mm)
Uploaded: February 16, 2020
Shared: February 16, 2020
Total Price: $21.35

Shield for XFM synthesizer project, https://www.futur3soundz.com/. XFM is a polyphonic, 32-voice, 6-operator FM synthesizer stereo module that you can build yourself.

Shield for XFM synthesizer project, https://www.futur3soundz.com/. XFM is a polyphonic, 32-voice, 6-operator FM synthesizer stereo module that you can build yourself.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Solar Tracking Head

author: Stephen
Top
Bottom

2 layer board of 1.51 x 1.81 inches (38.2 x 45.9 mm)
Uploaded: January 11, 2019
Shared: February 16, 2020
Total Price: $13.55

Solar Tracking Head V5

Solar Tracking Head V5

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp

author: 2igosha
Top
Bottom

2 layer board of 0.79 x 0.83 inches (20.0 x 21.1 mm)
Uploaded: February 16, 2020
Shared: February 16, 2020
Total Price: $3.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

hc05-rn42_evaluation-kit

author: FLY-ING
Top
Bottom

2 layer board of 1.14 x 1.21 inches (28.8 x 30.7 mm)
Uploaded: February 15, 2020
Shared: February 16, 2020
Total Price: $6.85

hc05-rn42_evaluation-kit

hc05-rn42_evaluation-kit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy