bluepill_scsi.kicad_pcb
2 layer board of 1.48 x 2.85 inches (37.5 x 72.5 mm)
Uploaded:
July 5th 2020
Shared:
July 6th 2020
Total Price:
$21.05
(Slightly updated) – the PNG I used to make the PCB was wrong in the position of SCSI_MSG – fixed that.
(Slightly updated) – the PNG I used to make the PCB was wrong in the position of SCSI_MSG – fixed that.
rf_bridge.kicad_pcb
2 layer board of 1.00 x 1.80 inches (25.4 x 45.8 mm)
Uploaded:
March 8th 2017
Shared:
March 8th 2017
Total Price:
$9.00
Board for my Serial bridge to RF 433Mhz transceiver. Uses an arduino nano, a cheap 433 RX + Tx module, and a NXP switch for the antenna. All the software bits are on my github. See https://github.com/buserror/rf_bridge
Board for my Serial bridge to RF 433Mhz transceiver. Uses an arduino nano, a cheap 433 RX + Tx module, and a NXP switch for the antenna. All the software bits are on my github. See https://github.com/buserror/rf_bridge