ATV Control Rev 1.0
author: lawr1000
2 layer board of 1.90 x 1.40 inches (48.4 x 35.7 mm)
Uploaded:
October 24, 2020
Shared:
November 22, 2020
Total Price:
$13.35
TESTED: Electronic relay control board for 20A horn and two 7.5A LED circuits. Supports switch and LED indicator control. Additional inputs for High beam and Reverse with turn appropriate LEDs on. Ignition sense will automatically turn off LEDs when ATV is turned off. Board is designed with Kicad…
Show full description
TESTED: Electronic relay control board for 20A horn and two 7.5A LED circuits. Supports switch and LED indicator control. Additional inputs for High beam and Reverse with turn appropriate LEDs on. Ignition sense will automatically turn off LEDs when ATV is turned off. Board is designed with Kicad…
Show full description
Upside Down Lab's BioAmp v1.5.4
author: lorforlinux
2 layer board of 1.26 x 2.37 inches (32.0 x 60.1 mm)
Uploaded:
November 20, 2020
Shared:
November 20, 2020
Total Price:
$14.90
Single supply biopotential amplifier.
Single supply biopotential amplifier.
nRFMicro 1.4
author: joric
2 layer board of 0.72 x 1.32 inches (18.2 x 33.4 mm)
Uploaded:
November 20, 2020
Shared:
November 20, 2020
Total Price:
$4.70
HDR's MBC5 Makho Edition
author: LovelyA72
2 layer board of 2.01 x 1.18 inches (51.2 x 30.1 mm)
Uploaded:
November 20, 2020
Shared:
November 20, 2020
Total Price:
$11.90
What do you think of makho's soldering?
(really good!)
What do you think of makho's soldering?
(really good!)
TankROM
author: cambridgearcade
2 layer board of 0.90 x 1.25 inches (22.9 x 31.8 mm)
Uploaded:
November 18, 2020
Shared:
November 18, 2020
Total Price:
$5.65
MK28000 PROM to 2716 EPROM Adapter. Either connect pin 9 on the socket to GND (instead of -12V) and jumper the adjacent GND pads, or add a flying lead from the lower pad to GND on the PCB.
OE and Latch inputs are not used.
MK28000 PROM to 2716 EPROM Adapter. Either connect pin 9 on the socket to GND (instead of -12V) and jumper the adjacent GND pads, or add a flying lead from the lower pad to GND on the PCB.
OE and Latch inputs are not used.