Shared Projects by joshua.rogers

Shared Projects by joshua.rogers

My Projects

Millennia Pro Laser Software Command Interlock

2 layer board of 1.97 x 2.76 inches (50.1 x 70.1 mm)
Uploaded: May 20th 2022
Shared: May 20th 2022
Total Price: $27.20

A board to power and breakout the signal pins to an ESP32 NodeMCU development board serving as an interlock for a Millennia Pro pump laser.

A board to power and breakout the signal pins to an ESP32 NodeMCU development board serving as an interlock for a Millennia Pro pump laser.

Embeddable link to order this shared Project

AOM pulse modulator v2

2 layer board of 1.88 x 1.61 inches (47.8 x 41.0 mm)
Uploaded: October 29th 2021
Shared: October 29th 2021
Total Price: $15.15

A circuit that takes an RF oscillator signal and gates it with a TTL pulse using an ADG919 switch. There are two complementary outputs and power is from 5 V …

A circuit that takes an RF oscillator signal and gates it with a TTL pulse using an ADG919 switch. There are two complementary outputs and power is from 5 V …

Embeddable link to order this shared Project

Koheron laser driver room interlock

2 layer board of 2.11 x 1.18 inches (53.6 x 30.1 mm)
Uploaded: March 8th 2021
Shared: March 8th 2021
Total Price: $12.45

A circuit for interlocking a Koheron laser driver with either a 12V active shutter line or normally closed room interlock circuit. When the room interlock 1…

A circuit for interlocking a Koheron laser driver with either a 12V active shutter line or normally closed room interlock circuit. When the room interlock 1…

Embeddable link to order this shared Project

Dual type laser interlock board

2 layer board of 3.49 x 1.24 inches (88.6 x 31.6 mm)
Uploaded: March 4th 2021
Shared: March 4th 2021
Total Price: $21.65

A board that takes either 12 V active or normally closed circuit signal from a door interlock to power or shut off a low noise 12 V laser driver.

A board that takes either 12 V active or normally closed circuit signal from a door interlock to power or shut off a low noise 12 V laser driver.

Embeddable link to order this shared Project

Falling/rising edge detector circuit

2 layer board of 1.44 x 0.66 inches (36.6 x 16.9 mm)
Uploaded: November 3rd 2020
Shared: November 3rd 2020
Total Price: $4.75

A circuit for detecting the falling or rising edge of a fast pulse, depending on the polarity of the diode pair

A circuit for detecting the falling or rising edge of a fast pulse, depending on the polarity of the diode pair

Embeddable link to order this shared Project