Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Genesis / Mega Drive Advanced UV EPROM Cart (v1.1)

author: mousebitelabs
Top
Bottom

2 layer board of 3.30 x 2.40 inches (83.8 x 61.0 mm)
Uploaded: August 23, 2025
Shared: August 23, 2025
Total Price: $39.55

Order in standard 1.6mm thickness. When you receive the board, I highly suggest sanding the cart edges to chamfer the cartridge yourself before inserting into a console. Failure to do so may shorten the lifetime and effectiveness of your console’s connector because the pins will be more stressed …

Show full description

Order in standard 1.6mm thickness. When you receive the board, I highly suggest sanding the cart edges to chamfer the cartridge yourself before inserting into a console. Failure to do so may shorten the lifetime and effectiveness of your console’s connector because the pins will be more stressed …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MCP230082chTHT

author: NAR26783
Top
Bottom

2 layer board of 1.59 x 1.29 inches (40.4 x 32.7 mm)
Uploaded: August 05, 2025
Shared: August 23, 2025
Total Price: $10.25

FLAWED: Pullup resistors R15 &R16 not pulled high. Needs airwire from Hi pad. Or some other I2C device on the bus… I2C dual deployment actuator for rocket or drone use. R1 15kΩ R2 4.7kΩ R3 3.0kΩ R4 15kΩ R5 15kΩ R6 4.7kΩ R7 3.0kΩ R8 15kΩ R9 15kΩ R10 4.7k R11 3.0kΩ R13 …

Show full description

FLAWED: Pullup resistors R15 &R16 not pulled high. Needs airwire from Hi pad. Or some other I2C device on the bus… I2C dual deployment actuator for rocket or drone use. R1 15kΩ R2 4.7kΩ R3 3.0kΩ R4 15kΩ R5 15kΩ R6 4.7kΩ R7 3.0kΩ R8 15kΩ R9 15kΩ R10 4.7k R11 3.0kΩ R13 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mic.kicad_pcb

author: i0x0i
Top
Bottom

2 layer board of 0.31 x 0.28 inches (7.8 x 7.0 mm)
Uploaded: February 06, 2019
Shared: August 22, 2025
Total Price: $0.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Genesis / Mega Drive Advanced Flash Cart (v1.1)

author: mousebitelabs
Top
Bottom

2 layer board of 3.30 x 2.40 inches (83.8 x 61.0 mm)
Uploaded: August 22, 2025
Shared: August 22, 2025
Total Price: $39.55

Order in standard 1.6mm thickness. When you receive the board, I highly suggest sanding the cart edges to chamfer the cartridge yourself before inserting into a console. Failure to do so may shorten the lifetime and effectiveness of your console's connector because the pins will be more stressed …

Show full description

Order in standard 1.6mm thickness. When you receive the board, I highly suggest sanding the cart edges to chamfer the cartridge yourself before inserting into a console. Failure to do so may shorten the lifetime and effectiveness of your console's connector because the pins will be more stressed …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ziggybridge-mkr.kicad_pcb

author: gsteiert
Top
Bottom

2 layer board of 2.17 x 1.80 inches (55.2 x 45.7 mm)
Uploaded: August 21, 2025
Shared: August 21, 2025
Total Price: $19.55

Solderless adapter board for Arduino MKR form factor boards with qwiic, mikroBUS Click and dual PMOD connectors.

Solderless adapter board for Arduino MKR form factor boards with qwiic, mikroBUS Click and dual PMOD connectors.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ECAT Card 0.2

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: August 19, 2025
Shared: August 19, 2025
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Project Outputs for 422PCB

author: lshalkhauser
Top
Bottom

4 layer board of 4.93 x 6.14 inches (125.3 x 155.9 mm)
Uploaded: August 19, 2025
Shared: August 19, 2025
Total Price: $302.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pulse Load Tester.kicad_pcb

author: DirtyMikeandtheBoys
Top
Bottom

2 layer board of 3.99 x 5.05 inches (101.4 x 128.3 mm)
Uploaded: August 18, 2025
Shared: August 18, 2025
Total Price: $100.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Switchnode v4

author: justDIY
Top
Bottom

2 layer board of 1.31 x 2.36 inches (33.2 x 59.8 mm)
Uploaded: August 06, 2018
Shared: August 18, 2025
Total Price: $15.40

esp8266 based DC switch. Basic version with two beefy mosfet and connection for a Dallas 1-wire temperature probe.

esp8266 based DC switch. Basic version with two beefy mosfet and connection for a Dallas 1-wire temperature probe.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

v13macropad.kicad_pcb_gerber

author: Trinidev1
Top
Bottom

2 layer board of 2.26 x 3.34 inches (57.3 x 84.9 mm)
Uploaded: August 05, 2025
Shared: August 17, 2025
Total Price: $37.65

trkey macropad

trkey macropad

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB LED Controller

author: oap
Top
Bottom

2 layer board of 1.05 x 1.40 inches (26.8 x 35.7 mm)
Uploaded: August 18, 2014
Shared: August 17, 2025
Total Price: $7.35

A simple RGB LED Controller

A simple RGB LED Controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Etherwave Pitch, Volume, & Gate CV

author: mikebuffington
Top
Bottom

2 layer board of 3.32 x 1.30 inches (84.3 x 33.0 mm)
Uploaded: November 27, 2022
Shared: August 15, 2025
Total Price: $21.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IS15ACP4 board

author: btondin
Top
Bottom

2 layer board of 1.05 x 1.24 inches (26.7 x 31.4 mm)
Uploaded: June 09, 2025
Shared: August 14, 2025
Total Price: $6.45

Breadboard adaptor for NKK IS15ACP4 OLED switch.

Datasheet: https://drive.google.com/file/d/1WFh0iCdxLbPHeKqmWWoIK1Bc-a80jiur/view?usp=drive_link

Breadboard adaptor for NKK IS15ACP4 OLED switch.

Datasheet: https://drive.google.com/file/d/1WFh0iCdxLbPHeKqmWWoIK1Bc-a80jiur/view?usp=drive_link

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TQFN16 TO DIL

author: btondin
Top
Bottom

2 layer board of 0.85 x 0.44 inches (21.6 x 11.2 mm)
Uploaded: August 13, 2025
Shared: August 14, 2025
Total Price: $1.85

TQFN16 to DIL adapter

TQFN16 to DIL adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

smerf8-tp.kicad_pcb

author: cdriver
Top
Bottom

2 layer board of 1.62 x 1.86 inches (41.2 x 47.2 mm)
Uploaded: August 13, 2025
Shared: August 13, 2025
Total Price: $15.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

smerf8-led.kicad_pcb

author: cdriver
Top
Bottom

2 layer board of 1.50 x 2.01 inches (38.1 x 51.0 mm)
Uploaded: August 13, 2025
Shared: August 13, 2025
Total Price: $15.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Syringe pump base v0.9

author: Bluestaz
Top
Bottom

2 layer board of 5.00 x 3.62 inches (127.0 x 92.0 mm)
Uploaded: August 13, 2025
Shared: August 13, 2025
Total Price: $90.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ACImac_Gen2_Oshpark_Gerber

author: UncleBernie
Top
Bottom

2 layer board of 4.02 x 2.11 inches (102.1 x 53.6 mm)
Uploaded: August 04, 2025
Shared: August 13, 2025
Total Price: $42.40

Uncle Bernie's "Gen2 improved ACI" based on the open source Gerbers from Misha Mdesk and as beautified by 'Macintosh_nik'.

Uncle Bernie's "Gen2 improved ACI" based on the open source Gerbers from Misha Mdesk and as beautified by 'Macintosh_nik'.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

exp_coils.kicad_pcb

author: ojeyap
Top
Bottom

2 layer board of 0.96 x 0.50 inches (24.4 x 12.7 mm)
Uploaded: August 13, 2025
Shared: August 13, 2025
Total Price: $2.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pxpwr.kicad_pcb

author: awmiller.keysight
Top
Bottom

2 layer board of 0.63 x 1.38 inches (16.0 x 35.0 mm)
Uploaded: December 14, 2023
Shared: August 12, 2025
Total Price: $4.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy