Shared Projects

Shared Projects

USB PSU dongle

author: SomehowSimple
Top
Bottom

2 layer board of 1.68 x 0.71 inches (42.6 x 18.1 mm)
Uploaded: August 29, 2013
Shared: November 28, 2013
Total Price: $5.95

A little USB powered 5V and 3V3 PSU. Information available at http://www.somehowsimple.co.za

A little USB powered 5V and 3V3 PSU. Information available at http://www.somehowsimple.co.za

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tag-Connect to CC-Debugger

author: digitalmisery
Top
Bottom

2 layer board of 0.80 x 0.65 inches (20.3 x 16.5 mm)
Uploaded: November 28, 2013
Shared: November 28, 2013
Total Price: $2.60

Tag-Connect TC2030-IDC Adapter for TI CC-Debugger

Tag-Connect to CC-Debugger

Tag-Connect TC2030-IDC Adapter for TI CC-Debugger

Tag-Connect to CC-Debugger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GBA Breakout Cartridge

author: shinyquagsire
Top
Bottom

2 layer board of 2.01 x 2.41 inches (51.1 x 61.1 mm)
Uploaded: November 28, 2013
Shared: November 28, 2013
Total Price: $24.20

Breaks out the pins in the GBA for reading and writing.

Breaks out the pins in the GBA for reading and writing.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pocket Pounder

author: jimilee
Top
Bottom

2 layer board of 2.10 x 1.14 inches (53.3 x 29.0 mm)
Uploaded: November 20, 2013
Shared: November 28, 2013
Total Price: $11.95

Crickett

Crickett

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rn52 BReakout

author: MCaracin
Top
Bottom

2 layer board of 1.11 x 1.28 inches (28.2 x 32.5 mm)
Uploaded: November 28, 2013
Shared: November 28, 2013
Total Price: $7.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1.2-3ghzConvBRD

author: irun4fundotca
Top
Bottom

2 layer board of 2.39 x 1.30 inches (60.7 x 33.0 mm)
Uploaded: November 28, 2013
Shared: November 28, 2013
Total Price: $15.50

Conversion Board for 1.2 & 1.3Ghz Video Transmitters Stock Lead to Fatshark Style Connectors (12v Out for camera's not 5v)

more info: http://www.rcgroups.com/forums/showpost.php?p=24739324&postcount=85

Board: ![Board](http://static.rcgroups.net/forums/attachments/3/9/6/1/0/4/a6378439-219-P1…

Show full description

Conversion Board for 1.2 & 1.3Ghz Video Transmitters Stock Lead to Fatshark Style Connectors (12v Out for camera's not 5v)

more info: http://www.rcgroups.com/forums/showpost.php?p=24739324&postcount=85

Board: ![Board](http://static.rcgroups.net/forums/attachments/3/9/6/1/0/4/a6378439-219-P1…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Millenium Bypass

author: TannerBlair
Top
Bottom

2 layer board of 0.79 x 0.70 inches (20.0 x 17.8 mm)
Uploaded: November 27, 2013
Shared: November 27, 2013
Total Price: $2.75

Allows for Status LED and true bypass

Allows for Status LED and true bypass

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amiga_RPI_Drive_int

author: mram
Top
Bottom

2 layer board of 2.06 x 1.95 inches (52.4 x 49.5 mm)
Uploaded: November 17, 2013
Shared: November 27, 2013
Total Price: $20.10

Amiga RPI

Amiga RPI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Somasoid MEP 0.25

author: Feldenthorne
Top
Bottom

2 layer board of 2.75 x 3.39 inches (69.8 x 86.1 mm)
Uploaded: November 27, 2013
Shared: November 27, 2013
Total Price: $46.55

The second iteration prototype mainboard for a 3-5 digit prosthesis whose actuation is enabled through motors controlled by muscle impulses recorded via surface electromyography (sEMG). The main goal is to create a low-cost prosthesis with either a self- or assisted-calibration feature. This woul…

Show full description

The second iteration prototype mainboard for a 3-5 digit prosthesis whose actuation is enabled through motors controlled by muscle impulses recorded via surface electromyography (sEMG). The main goal is to create a low-cost prosthesis with either a self- or assisted-calibration feature. This woul…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pulse Sensor v3

author: Ladvien
Top
Bottom

2 layer board of 0.62 x 0.62 inches (15.8 x 15.8 mm)
Uploaded: October 07, 2013
Shared: November 27, 2013
Total Price: $1.90

Pulse Sensor v3 Alt text

Added tented vias and did some re-routing. Tested and working.

http://letsmakerobots.com/node/38544

Pulse Sensor v3 Alt text

Added tented vias and did some re-routing. Tested and working.

http://letsmakerobots.com/node/38544

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED Board

author: will3509111
Top
Bottom

2 layer board of 3.26 x 0.48 inches (82.7 x 12.2 mm)
Uploaded: November 10, 2013
Shared: November 27, 2013
Total Price: $7.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

60 degree LED-strip connector board

author: Zephod
Top
Bottom

2 layer board of 0.88 x 0.61 inches (22.4 x 15.4 mm)
Uploaded: November 20, 2013
Shared: November 27, 2013
Total Price: $2.65

Allows LED sticks to be mounted in triangles.

Allows LED sticks to be mounted in triangles.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED-strip connector - T crossing

author: Zephod
Top
Bottom

2 layer board of 0.60 x 0.50 inches (15.3 x 12.7 mm)
Uploaded: November 27, 2013
Shared: November 27, 2013
Total Price: $1.50

Configurable T-crossing for LED-strips. The solder jumpers can be used to connect either side to VCC/GND and let the center-data flow from any header to any other.

Configurable T-crossing for LED-strips. The solder jumpers can be used to connect either side to VCC/GND and let the center-data flow from any header to any other.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPI_V2.0d

author: cj8scrambler
Top
Bottom

2 layer board of 3.86 x 1.75 inches (98.1 x 44.4 mm)
Uploaded: June 23, 2013
Shared: November 26, 2013
Total Price: $33.75

Raspberry Pi 9 relay board and OWB temp sensor

Raspberry Pi 9 relay board and OWB temp sensor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fab Speakers 2012-08-02

author: mellis
Top
Bottom

2 layer board of 2.15 x 2.15 inches (54.6 x 54.6 mm)
Uploaded: November 26, 2013
Shared: November 26, 2013
Total Price: $23.10

Simple audio amplifier for speakers.

Simple audio amplifier for speakers.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MPPT v0.3

author: steeleam
Top
Bottom

2 layer board of 2.17 x 1.18 inches (55.0 x 30.0 mm)
Uploaded: November 26, 2013
Shared: November 26, 2013
Total Price: $12.80

3S LiPo charger with MPPT ( LT3652 )

3S LiPo charger with MPPT ( LT3652 )

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Small module v2

Top
Bottom

2 layer board of 1.71 x 1.27 inches (43.4 x 32.3 mm)
Uploaded: October 12, 2012
Shared: November 26, 2013
Total Price: $10.85

Small module v2

Small module v2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shield v2

Top
Bottom

2 layer board of 2.45 x 2.14 inches (62.3 x 54.3 mm)
Uploaded: October 12, 2012
Shared: November 26, 2013
Total Price: $26.20

Shield v2

Shield v2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CE2

author: TannerBlair
Top
Bottom

2 layer board of 2.21 x 2.73 inches (56.2 x 69.2 mm)
Uploaded: November 26, 2013
Shared: November 26, 2013
Total Price: $30.15

Boss CE2 Clone

Boss CE2 Clone

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QuadPro Heli Controller

author: BrendanBates
Top
Bottom

2 layer board of 1.94 x 1.94 inches (49.2 x 49.2 mm)
Uploaded: November 26, 2013
Shared: November 26, 2013
Total Price: $18.70

Multirotor Helicopter Controller (up to 4 rotors). Website and blog with documentation coming soon.

Multirotor Helicopter Controller (up to 4 rotors). Website and blog with documentation coming soon.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy