Shared Projects

Shared Projects

AKA mod of Adafruit BBB Proto Cape

author: akamediasystem
Top
Bottom

2 layer board of 2.83 x 2.16 inches (71.9 x 54.7 mm)
Uploaded: January 07, 2014
Shared: January 18, 2014
Total Price: $30.50

Modification of Adafruit's excellent BBB Proto Cape

Modification of Adafruit's excellent BBB Proto Cape

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Led Pulser

author: Earl
Top
Bottom

2 layer board of 1.55 x 1.85 inches (39.4 x 47.0 mm)
Uploaded: January 18, 2014
Shared: January 18, 2014
Total Price: $14.30

Hexagon led pulser

Hexagon led pulser

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pogo Pin 20 Jig

author: Ladvien
Top
Bottom

2 layer board of 0.30 x 0.40 inches (7.7 x 10.2 mm)
Uploaded: December 04, 2013
Shared: January 18, 2014
Total Price: $0.60

Pogo Pin Jig v1

Pogo Pin Jig v1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A Ttiny84

author: Ladvien
Top
Bottom

2 layer board of 0.50 x 0.75 inches (12.8 x 18.9 mm)
Uploaded: December 05, 2013
Shared: January 18, 2014
Total Price: $1.85

ATtiny84

Alt text

<http://letsmakerobots.com/node/39130>

Pogo-pin ISP header. Tested, working.

ATtiny84

Alt text

<http://letsmakerobots.com/node/39130>

Pogo-pin ISP header. Tested, working.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SlimLightBar

author: Sperly
Top
Bottom

2 layer board of 3.10 x 0.26 inches (78.6 x 6.5 mm)
Uploaded: January 18, 2014
Shared: January 18, 2014
Total Price: $3.95

Slim light bar, modular

Slim light bar, modular

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LTR Relay switching with 40106

author: derevaun
Top
Bottom

2 layer board of 1.80 x 1.33 inches (45.7 x 33.7 mm)
Uploaded: November 09, 2013
Shared: January 18, 2014
Total Price: $11.90

Verified!
Mictester's relay switching scheme for momentary NO switch, using Neutrik-style 6-pin jacks (like Tayda). Uses 40106 CMOS with transistors to trigger typical latching relay (AL5WK, etc). Resistors and sub-µF caps are 0805 surface mount.
No ground separation or opto muting; may allow…

Show full description

Verified!
Mictester's relay switching scheme for momentary NO switch, using Neutrik-style 6-pin jacks (like Tayda). Uses 40106 CMOS with transistors to trigger typical latching relay (AL5WK, etc). Resistors and sub-µF caps are 0805 surface mount.
No ground separation or opto muting; may allow…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CurveTracer1.0

author: Mythricia
Top
Bottom

2 layer board of 7.13 x 3.20 inches (181.2 x 81.2 mm)
Uploaded: November 27, 2013
Shared: January 18, 2014
Total Price: $113.95

Simple curve tracer, component tester

Simple curve tracer, component tester

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

i2c nixie v1.0

author: jad73994
Top
Bottom

2 layer board of 1.43 x 2.10 inches (36.2 x 53.3 mm)
Uploaded: December 28, 2013
Shared: January 17, 2014
Total Price: $14.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BluetoothModule

author: lukeweston
Top
Bottom

2 layer board of 2.30 x 1.20 inches (58.4 x 30.5 mm)
Uploaded: January 17, 2014
Shared: January 17, 2014
Total Price: $13.80

Basic breakout board for Laird BL600 Bluetooth Low Energy module, with FT230X USB

Basic breakout board for Laird BL600 Bluetooth Low Energy module, with FT230X USB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dc electronic load

author: prettygoodaudio
Top
Bottom

2 layer board of 2.50 x 3.00 inches (63.6 x 76.3 mm)
Uploaded: December 31, 2013
Shared: January 17, 2014
Total Price: $37.60

a simple adjustable dc electronic load. details and schematic at http://groupdiy.com/index.php?topic=54933.0

a simple adjustable dc electronic load. details and schematic at http://groupdiy.com/index.php?topic=54933.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

i2c LCD backpack

author: nsayer
Top
Bottom

2 layer board of 3.15 x 1.40 inches (80.0 x 35.6 mm)
Uploaded: January 17, 2014
Shared: January 17, 2014
Total Price: $22.05

RGB LCD i2c backpack, with buzzer

RGB LCD i2c backpack, with buzzer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Squeaker Project

author: mattpatt
Top
Bottom

2 layer board of 1.11 x 0.99 inches (28.1 x 25.2 mm)
Uploaded: January 16, 2014
Shared: January 16, 2014
Total Price: $5.45

Uses a voice recorder module to play back a sound to a set time delay.

Uses a voice recorder module to play back a sound to a set time delay.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dangerpants Labs Air Data Instrument v1.3

author: DangerpantsLabs
Top
Bottom

2 layer board of 3.21 x 2.06 inches (81.5 x 52.4 mm)
Uploaded: January 16, 2014
Shared: January 16, 2014
Total Price: $33.05

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP180.

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP180.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gripper End Effector V1.0

author: Josh-Jetter
Top
Bottom

2 layer board of 1.85 x 2.09 inches (47.0 x 53.0 mm)
Uploaded: January 16, 2014
Shared: January 16, 2014
Total Price: $19.30

Nathan's board for the gripper end effector control

Nathan's board for the gripper end effector control

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ADC Adapter Board JDIA-2483 2013530

author: jolshefsky
Top
Bottom

2 layer board of 3.59 x 2.21 inches (91.1 x 56.0 mm)
Uploaded: May 31, 2013
Shared: January 16, 2014
Total Price: $39.50

This is a basic board that allows a DVI connection to an Apple Display Connector monitor. See the main documentation at JasonDoesItAll.com for more details of the project.

This is a basic board that allows a DVI connection to an Apple Display Connector monitor. See the main documentation at JasonDoesItAll.com for more details of the project.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dangerpants Labs Air Data Instrument v1.2

author: DangerpantsLabs
Top
Bottom

2 layer board of 3.21 x 2.06 inches (81.5 x 52.4 mm)
Uploaded: January 14, 2014
Shared: January 15, 2014
Total Price: $33.05

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP085.

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP085.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8-SOIC/EP Breakout Board

author: Eric
Top
Bottom

2 layer board of 0.51 x 0.41 inches (12.9 x 10.3 mm)
Uploaded: October 09, 2013
Shared: January 15, 2014
Total Price: $1.00

Cost: $1.00 for three.

Description:

Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.

Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provid…

Show full description

Cost: $1.00 for three.

Description:

Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.

Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provid…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SOT-23 & SOT-3X3 Breakout Board

author: Eric
Top
Bottom

2 layer board of 0.41 x 0.31 inches (10.3 x 7.8 mm)
Uploaded: January 15, 2014
Shared: January 15, 2014
Total Price: $0.60

UPDATED!

Cost: $0.60 for three.

Description:

Breakout board for SOT-23, SOT-323, SOT-343, SOT-353 and SOT-363 packages. Converts these 3, 4, 5 and 6-pin SMD components to breadboard-friendly 0.1-inch pitch by 0.3-inch width through-hole format. Pins numbered for quick r…

Show full description

UPDATED!

Cost: $0.60 for three.

Description:

Breakout board for SOT-23, SOT-323, SOT-343, SOT-353 and SOT-363 packages. Converts these 3, 4, 5 and 6-pin SMD components to breadboard-friendly 0.1-inch pitch by 0.3-inch width through-hole format. Pins numbered for quick r…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Real Time Clock and Sensor Shield

author: jtilghman
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: January 06, 2014
Shared: January 15, 2014
Total Price: $28.30

DS1307 Real Time Clock and Sensor Shield

Needed some place to plug in my PING)))'s and wheel encoders for my robot. Thought I would add an RTC while I was at it.

This is my 1st PC board, and I haven't received the board yet so this isn't tested.

DS1307 Real Time Clock and Sensor Shield

Needed some place to plug in my PING)))'s and wheel encoders for my robot. Thought I would add an RTC while I was at it.

This is my 1st PC board, and I haven't received the board yet so this isn't tested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LiPo Charger

author: Lukaszp
Top
Bottom

2 layer board of 1.44 x 1.10 inches (36.5 x 27.9 mm)
Uploaded: January 15, 2014
Shared: January 15, 2014
Total Price: $7.90

MCP73833 LiPo batty charger

MCP73833 LiPo batty charger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy