Shared Projects

Shared Projects

Nanjg 105C compatible 20mm LED driver

author: texaspyro
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.1 x 20.1 mm)
Uploaded: January 16, 2014
Shared: January 25, 2014
Total Price: $3.10

20mm Nanjg 105C compatible LED/flashlight driver.

Diode D1 is a BAT54 (be careful of the different versions with various diode arrangements).

C1 is 10 uF

Resistors are 19.1K and 4.7K, 1%

Regulator chips are AMC7135

Processor is ATTINY13 with Nlite or BLF-VLD firmware. Google fo…

Show full description

20mm Nanjg 105C compatible LED/flashlight driver.

Diode D1 is a BAT54 (be careful of the different versions with various diode arrangements).

C1 is 10 uF

Resistors are 19.1K and 4.7K, 1%

Regulator chips are AMC7135

Processor is ATTINY13 with Nlite or BLF-VLD firmware. Google fo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB to TTL level serial converter

Top
Bottom

2 layer board of 0.60 x 1.00 inches (15.3 x 25.4 mm)
Uploaded: January 20, 2014
Shared: January 25, 2014
Total Price: $3.00

using FT232RL

using FT232RL

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

logi-bone arduino pt r1.1

author: valentfx
Top
Bottom

2 layer board of 1.96 x 0.41 inches (49.7 x 10.5 mm)
Uploaded: January 24, 2014
Shared: January 24, 2014
Total Price: $4.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

logipi-arduino-pt-r1_1

author: valentfx
Top
Bottom

2 layer board of 1.96 x 0.43 inches (49.7 x 10.8 mm)
Uploaded: January 24, 2014
Shared: January 24, 2014
Total Price: $4.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

I/O Port Expander for Arduino Pro Mini

author: nochkin
Top
Bottom

2 layer board of 1.84 x 1.30 inches (46.7 x 33.0 mm)
Uploaded: January 24, 2014
Shared: January 24, 2014
Total Price: $11.90

14 ports with ULN2003 for Arduino Pro Mini

14 ports with ULN2003 for Arduino Pro Mini

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTiny85 breakout with ICSP v1 $1.90 for 3

Top
Bottom

2 layer board of 0.60 x 0.64 inches (15.3 x 16.2 mm)
Uploaded: January 19, 2014
Shared: January 24, 2014
Total Price: $1.90

ATTiny85 breakout with ICSP v1 $1.90 for 3

ATTiny85 breakout with ICSP v1 $1.90 for 3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Auto Relay

author: Animo
Top
Bottom

2 layer board of 1.04 x 1.04 inches (26.4 x 26.4 mm)
Uploaded: January 24, 2014
Shared: January 24, 2014
Total Price: $5.40

Solid State version of NC/NO Uses Pch mosfets for relay contacts Optional NC or NO Schematic/BOM [email protected]

Solid State version of NC/NO Uses Pch mosfets for relay contacts Optional NC or NO Schematic/BOM [email protected]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SSOP 20 Soldering Practice Bigger IC

author: nmz787
Top
Bottom

2 layer board of 0.99 x 1.00 inches (25.2 x 25.5 mm)
Uploaded: January 24, 2014
Shared: January 24, 2014
Total Price: $4.95

Larger IC than last board rev, pads spaced fur

Larger IC than last board rev, pads spaced fur

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoQuad misc

author: joebar
Top
Bottom

2 layer board of 1.11 x 1.19 inches (28.3 x 30.1 mm)
Uploaded: January 23, 2014
Shared: January 23, 2014
Total Price: $6.60

Currentsensor breakoutboard for ACS75x

( * not tested yet, design rules checked - Update: increased drill size for awg14 wire and thermal via's*)

Example usage: Connect to the mav2hott arduino to send the current usage and capacity to the HoTT transmitter.

Currentsensor breakoutboard for ACS75x

( * not tested yet, design rules checked - Update: increased drill size for awg14 wire and thermal via's*)

Example usage: Connect to the mav2hott arduino to send the current usage and capacity to the HoTT transmitter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

16 Bit analog digital multiplexer

Top
Bottom

2 layer board of 1.68 x 1.40 inches (42.7 x 35.6 mm)
Uploaded: January 22, 2014
Shared: January 23, 2014
Total Price: $11.75

16-bit analog/digital multiplexer/demultiplexer breakout board using dip24 package. Read more about this multiplexer/demultiplexer breakout board .

16-bit analog/digital multiplexer/demultiplexer breakout board using dip24 package. Read more about this multiplexer/demultiplexer breakout board .

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

serial logger for Davis consoles

author: belfryboy
Top
Bottom

2 layer board of 0.99 x 0.87 inches (25.0 x 22.0 mm)
Uploaded: January 23, 2014
Shared: January 23, 2014
Total Price: $4.25

serial logger for davis console

serial logger for davis console

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BTRremote

author: Anteater
Top
Bottom

2 layer board of 2.01 x 1.01 inches (51.0 x 25.6 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $10.05

Bluetooth remote

Bluetooth remote

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Baofeng UV5R TRRS Adapter

author: johnboiles
Top
Bottom

2 layer board of 1.08 x 0.32 inches (27.4 x 8.2 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $1.70

Fork on GitHub

Tiny board that allows you to connect the Baofeng UV5R radio to a smartphone or other device that uses a TRRS connector for audio. Useful for connecting the radio to a software TNC app such as APRSDroid o…

Show full description

Fork on GitHub

Tiny board that allows you to connect the Baofeng UV5R radio to a smartphone or other device that uses a TRRS connector for audio. Useful for connecting the radio to a software TNC app such as APRSDroid o…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Regulated Split Supply Rev. 1

author: ccorn90
Top
Bottom

2 layer board of 1.65 x 1.84 inches (41.9 x 46.7 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $15.15

Uses LM317/337 to make +/- regulated supplies.

Uses LM317/337 to make +/- regulated supplies.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Midipal Analog IO

author: p_ache
Top
Bottom

2 layer board of 3.70 x 2.38 inches (94.0 x 60.3 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $43.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

io_expander

author: Russ
Top
Bottom

2 layer board of 2.31 x 0.61 inches (58.6 x 15.4 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $6.95

32 bit 1.2V - 5.5V IO expander

Board image

32 bit 1.2V - 5.5V IO expander

Board image

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoQuad CAN v1.11

author: joebar
Top
Bottom

2 layer board of 1.70 x 0.63 inches (43.3 x 16.0 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $5.35

AutoQuad CAN & UART2 breakoutboard

( * Functional * ) * Corrected GPIO pin5/6 to RX & TX *

This shield is host to the CAN transceiver and provide access to the free UART2 port on the AutoQuad 6 FC.
Multiple connector options: JST-ZH, JST-SH, Molex 1.5
Dual 10 pin 1.27mm pin header…

Show full description

AutoQuad CAN & UART2 breakoutboard

( * Functional * ) * Corrected GPIO pin5/6 to RX & TX *

This shield is host to the CAN transceiver and provide access to the free UART2 port on the AutoQuad 6 FC.
Multiple connector options: JST-ZH, JST-SH, Molex 1.5
Dual 10 pin 1.27mm pin header…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dash7DuinoV1

author: boxysean
Top
Bottom

2 layer board of 3.29 x 0.72 inches (83.6 x 18.2 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $11.80

My first board. :) Followed the "Make Your Own D*mn Board" from the recent MAKE Magazine.

My first board. :) Followed the "Make Your Own D*mn Board" from the recent MAKE Magazine.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoQuad misc

author: joebar
Top
Bottom

2 layer board of 2.57 x 0.32 inches (65.2 x 8.1 mm)
Uploaded: January 22, 2014
Shared: January 22, 2014
Total Price: $4.10

WS2812B 4 and 1 pixel board for Mav2HoTT

( * Functional * )

Intended purpose is to place the 4 pixelboard on a multirotor boom and (optional) the 1 pixel board (can be cut from the pcb) on the front.
Boards can be daisy chained up to 50 leds on the Mav2HoTT.
BOM:
Connectors…

Show full description

WS2812B 4 and 1 pixel board for Mav2HoTT

( * Functional * )

Intended purpose is to place the 4 pixelboard on a multirotor boom and (optional) the 1 pixel board (can be cut from the pcb) on the front.
Boards can be daisy chained up to 50 leds on the Mav2HoTT.
BOM:
Connectors…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SLA Battery Charger

author: I2CMaster
Top
Bottom

2 layer board of 0.99 x 1.38 inches (25.1 x 34.9 mm)
Uploaded: January 21, 2014
Shared: January 22, 2014
Total Price: $6.75

Charges SLA 12v and can provides a system out.

Charges SLA 12v and can provides a system out.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy