Shared Projects

Shared Projects

NES Controller USB Dongle

author: brodyf42
Top
Bottom

2 layer board of 1.71 x 0.70 inches (43.5 x 17.8 mm)
Uploaded: February 12, 2014
Shared: February 12, 2014
Total Price: $6.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Basic biamp system

author: ccorn90
Top
Bottom

2 layer board of 2.30 x 3.00 inches (58.4 x 76.2 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $34.45

Small board that uses LM1875 for 10W into each band. Do not exceed +/- 15V supplies!

Small board that uses LM1875 for 10W into each band. Do not exceed +/- 15V supplies!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Protos

author: bloguetronica
Top
Bottom

2 layer board of 2.36 x 1.97 inches (60.0 x 50.0 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $23.25

ICSP to ZIF adapter card

ICSP to ZIF adapter card

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Double Clipper Switch Board

author: gjcamann
Top
Bottom

2 layer board of 0.72 x 0.67 inches (18.2 x 16.9 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $2.35

Switch mounted board offering choice of 2 double stage clippers . Build Doc

Switch mounted board offering choice of 2 double stage clippers . Build Doc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Filter Switch Board

author: gjcamann
Top
Bottom

2 layer board of 0.73 x 0.57 inches (18.5 x 14.4 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $2.05

Switch mounted board offering choice of 2 switch mounted filters for guitar pedals. Build Doc

Switch mounted board offering choice of 2 switch mounted filters for guitar pedals. Build Doc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Manning Boost

author: gjcamann
Top
Bottom

2 layer board of 1.15 x 0.94 inches (29.2 x 23.9 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $5.35

A guitar pedal booster that is all over the place. Build Doc

A guitar pedal booster that is all over the place. Build Doc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Clipper Switch Board

author: gjcamann
Top
Bottom

2 layer board of 0.52 x 0.67 inches (13.1 x 17.0 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $1.70

Switch mounted board offering choice of 2 single stage clippers for guitar pedals. Build Doc

Switch mounted board offering choice of 2 single stage clippers for guitar pedals. Build Doc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCRPI ATX

author: Akira76
Top
Bottom

2 layer board of 0.93 x 0.54 inches (23.5 x 13.6 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $2.45

PCDuino/Rasperry Pi ATX-like power supply

PCDuino/Rasperry Pi ATX-like power supply

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLE Breadboard footprint

author: Jegor
Top
Bottom

2 layer board of 0.95 x 1.44 inches (24.0 x 36.6 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $6.80

two layers

two layers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8-Bit Shift Register

author: brodyf42
Top
Bottom

2 layer board of 0.85 x 0.90 inches (21.6 x 22.9 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $3.80

This is a chainable 8-Bit serial-in / parallel-out shift register based on the 74HC164 IC. Be aware that the reset is actve LOW.

This is a chainable 8-Bit serial-in / parallel-out shift register based on the 74HC164 IC. Be aware that the reset is actve LOW.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTiny XBee Connected I2C / Analog Sensor

author: chipmc
Top
Bottom

2 layer board of 2.35 x 1.25 inches (59.7 x 31.8 mm)
Uploaded: January 28, 2014
Shared: February 11, 2014
Total Price: $14.70

Tested - Works!

General Purpose I2C and Analog Wireless Sensor Board. This board supports an I2C and a Digital / Analog sensor connection and the ability to communicate readings using an XBee radio.

Tested - Works!

General Purpose I2C and Analog Wireless Sensor Board. This board supports an I2C and a Digital / Analog sensor connection and the ability to communicate readings using an XBee radio.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Alps 8-way joystick breakout board.

author: macona
Top
Bottom

2 layer board of 0.91 x 1.15 inches (23.0 x 29.2 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $5.20

Breakouts the Alps RKJXL100401V

Breakouts the Alps RKJXL100401V

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breadboard USB Port

author: brodyf42
Top
Bottom

2 layer board of 0.62 x 0.58 inches (15.8 x 14.8 mm)
Uploaded: February 11, 2014
Shared: February 11, 2014
Total Price: $1.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power Supply: AC Mains to Low Voltage DC

author: Eric
Top
Bottom

2 layer board of 1.63 x 2.30 inches (41.4 x 58.3 mm)
Uploaded: January 15, 2014
Shared: February 10, 2014
Total Price: $18.70

Cost: $18.70 for three.

Description:

I needed a low voltage, low current DC power supply for a mains-powered project but I was out of spare wall warts, so I whipped this together and it does the job nicely.

Holes along the edges of the board are sized for [M3 x 4mm stando…

Show full description

Cost: $18.70 for three.

Description:

I needed a low voltage, low current DC power supply for a mains-powered project but I was out of spare wall warts, so I whipped this together and it does the job nicely.

Holes along the edges of the board are sized for [M3 x 4mm stando…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CRAMPS V1.0

author: cdsteinkuehler
Top
Bottom

2 layer board of 3.92 x 4.02 inches (99.4 x 102.0 mm)
Uploaded: February 10, 2014
Shared: February 10, 2014
Total Price: $78.55

3D printing cape for the BeagleBone, based on the RAMPS-FD design for the Due. Details Source Files

3D printing cape for the BeagleBone, based on the RAMPS-FD design for the Due. Details Source Files

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS232 for Electric Imp BreakOut Board

author: ljbeng
Top
Bottom

2 layer board of 1.19 x 1.26 inches (30.2 x 32.0 mm)
Uploaded: February 09, 2014
Shared: February 10, 2014
Total Price: $7.50

This will solder directly to the SparkFun Electric Imp breakout https://www.sparkfun.com/products/11400 and adds RS232 Serial voltage levels to the Imp. Power and serial are all through an RJ12 6 pin connector. 1-GND, 2-+5V, 3-Tx232, 4-Rx232. Uses Uart57 on Imp. Chip is Max3232 http://www….

Show full description

This will solder directly to the SparkFun Electric Imp breakout https://www.sparkfun.com/products/11400 and adds RS232 Serial voltage levels to the Imp. Power and serial are all through an RJ12 6 pin connector. 1-GND, 2-+5V, 3-Tx232, 4-Rx232. Uses Uart57 on Imp. Chip is Max3232 http://www….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ECE3440 I/O Expansion Board (Rev4)

author: Erikku
Top
Bottom

2 layer board of 1.98 x 1.98 inches (50.3 x 50.3 mm)
Uploaded: February 10, 2014
Shared: February 10, 2014
Total Price: $19.55

ECE3440 I/O Expansion Board (Rev4)

ECE3440 I/O Expansion Board (Rev4)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Charlie Heart

author: rmd6502
Top
Bottom

2 layer board of 1.86 x 2.29 inches (47.1 x 58.1 mm)
Uploaded: February 10, 2014
Shared: February 10, 2014
Total Price: $21.20

Rev 2.3

Rev 2.3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX21100 V3 Breakout

author: SpaceCoaster
Top
Bottom

2 layer board of 0.61 x 0.61 inches (15.6 x 15.6 mm)
Uploaded: February 09, 2014
Shared: February 09, 2014
Total Price: $1.85

Breakout board for MAX21100 a low-power, ultra-accurate 6+3 DoF IMU from Maxim Integrated.

Eagle files can be found at Github.

Breakout board for MAX21100 a low-power, ultra-accurate 6+3 DoF IMU from Maxim Integrated.

Eagle files can be found at Github.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Type 5 Comparator

author: tricorderproject
Top
Bottom

2 layer board of 1.58 x 0.78 inches (40.0 x 19.8 mm)
Uploaded: February 09, 2014
Shared: February 09, 2014
Total Price: $6.10

External comparator for Radiation Watch Type 5 Detector

External comparator for Radiation Watch Type 5 Detector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy