BLF TINY10
author: Helios-
2 layer board of 0.42 x 0.42 inches (10.6 x 10.6 mm)
Uploaded:
May 18, 2014
Shared:
May 18, 2014
Total Price:
$0.85
Includes paste layers. Can be used at oshstencil.com. Board created by Mattaus.
10mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 or similar
LED connects to the + and – holes. Outer ring is ground.
Battery plus connects to + from the reverse side.
The driver mode configuration “stars” are marked 2 to 4 on the MCU side of the driver.
BLF discussion thread: http://budgetlightforum.com/node/24953#comment-550914
Includes paste layers. Can be used at oshstencil.com. Board created by Mattaus.
10mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 or similar
LED connects to the + and – holes. Outer ring is ground.
Battery plus connects to + from the reverse side.
The driver mode configuration “stars” are marked 2 to 4 on the MCU side of the driver.
BLF discussion thread: http://budgetlightforum.com/node/24953#comment-550914
