DIP-8 breakout board
author: nsayer
2 layer board of 0.60 x 0.85 inches (15.3 x 21.6 mm)
Uploaded:
April 01, 2014
Shared:
April 01, 2014
Total Price:
$2.55
Conveniently use 8 pin DIP chips with a breadboard.
P.S. This was an April Fools' joke.
Conveniently use 8 pin DIP chips with a breadboard.
P.S. This was an April Fools' joke.
LM3406 LED driver
author: insanity_wolf
2 layer board of 1.10 x 1.10 inches (27.9 x 28.0 mm)
Uploaded:
April 01, 2014
Shared:
April 01, 2014
Total Price:
$6.05
350mA…1.4A LEDdrivr
350mA…1.4A LEDdrivr
Spritesmind YM2612 Synthesizer
author: ranix
2 layer board of 6.30 x 3.94 inches (160.0 x 100.0 mm)
Uploaded:
April 01, 2014
Shared:
April 01, 2014
Total Price:
$124.00
A hardware synthesizer using sound chips from a Sega Genesis
A hardware synthesizer using sound chips from a Sega Genesis
4-Fader MIDI Controller
author: theturtle32
2 layer board of 6.30 x 3.94 inches (160.0 x 100.0 mm)
Uploaded:
January 22, 2014
Shared:
March 31, 2014
Total Price:
$124.00
for Justin Burnett.
Note: the RX/TX lines on the FTDI connector are reversed on this board.
for Justin Burnett.
Note: the RX/TX lines on the FTDI connector are reversed on this board.
4-Fader MIDI Controller (Ext. Faders) v1.2
author: theturtle32
2 layer board of 1.50 x 2.40 inches (38.0 x 61.0 mm)
Uploaded:
February 03, 2014
Shared:
March 31, 2014
Total Price:
$17.95
For Justin Burnett
For Justin Burnett
Atmel (Arduino) virgin chip flasher
author: zorpat
2 layer board of 1.44 x 0.50 inches (36.5 x 12.7 mm)
Uploaded:
March 31, 2014
Shared:
March 31, 2014
Total Price:
$3.55
With this PCB you can flash TQFP and 8DIP virgin Atmel chips
With this PCB you can flash TQFP and 8DIP virgin Atmel chips
Traffic Light Shield
author: jmclean
2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded:
March 31, 2014
Shared:
March 31, 2014
Total Price:
$28.30
Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.
Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.
RocketLog
author: matthewkennedy
2 layer board of 0.64 x 1.22 inches (16.2 x 31.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$3.85
RocketLog
RocketLog
CREE XB 16mm star
author: Helios-
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16mm star
author: Helios-
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
