Wireless Board REV1.2
author: Ruben
2 layer board of 1.36 x 2.44 inches (34.5 x 61.8 mm)
Uploaded:
December 30, 2013
Shared:
March 27, 2014
Total Price:
$16.55
Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. (unfortunately due to a design error the dip-switches are useless, an updated version will be updated later on). Replaced by REV 1.2.2
Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. (unfortunately due to a design error the dip-switches are useless, an updated version will be updated later on). Replaced by REV 1.2.2
TO-220 breakout v2
author: pepaslabs
2 layer board of 1.75 x 1.50 inches (44.6 x 38.2 mm)
Uploaded:
March 26, 2014
Shared:
March 26, 2014
Total Price:
$13.15
TO-220 (TO-218, TO-247) breakout board with heatsink.
https://github.com/pepaslabs/TO-220_breakout
TO-220 (TO-218, TO-247) breakout board with heatsink.
https://github.com/pepaslabs/TO-220_breakout
HxC LCD Adapter
author: evilxyzzy
2 layer board of 1.62 x 0.95 inches (41.0 x 24.1 mm)
Uploaded:
August 30, 2013
Shared:
March 25, 2014
Total Price:
$7.65
Adapter board for small LCD to HxC Floppy Emulator board. This converts HDM16216L-S ( tiny LCD ) FFC cable to standard 16pin. Uses Mouser 649-HLW16R-2C7LF connector. The concept is to make things small enough to mount in a 3.5" drive bay because I am too cheap to buy the 3.5" version.
Adapter board for small LCD to HxC Floppy Emulator board. This converts HDM16216L-S ( tiny LCD ) FFC cable to standard 16pin. Uses Mouser 649-HLW16R-2C7LF connector. The concept is to make things small enough to mount in a 3.5" drive bay because I am too cheap to buy the 3.5" version.
SDSAdapter
author: evilxyzzy
2 layer board of 1.23 x 1.40 inches (31.1 x 35.6 mm)
Uploaded:
February 21, 2014
Shared:
March 25, 2014
Total Price:
$8.55
midi2sds(x) gate voltage level adapter. This makes a v1.3 board act like a v1.5 board so you can set the pulse voltage near 10volts instead of 2.5v. Plugs in place of DAC with no mods just one wire to run for +12v. If you actually use this, contact me for details.
midi2sds(x) gate voltage level adapter. This makes a v1.3 board act like a v1.5 board so you can set the pulse voltage near 10volts instead of 2.5v. Plugs in place of DAC with no mods just one wire to run for +12v. If you actually use this, contact me for details.
TS850-DCDC
author: evilxyzzy
2 layer board of 1.20 x 0.80 inches (30.5 x 20.3 mm)
Uploaded:
March 25, 2014
Shared:
March 25, 2014
Total Price:
$4.80
TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )
TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )
HoldUp2+RTC
author: BudBennett
2 layer board of 1.49 x 1.08 inches (37.8 x 27.5 mm)
Uploaded:
September 11, 2013
Shared:
March 25, 2014
Total Price:
$8.05
Provides power from super cap to Raspberry Pi during power loss, and real-time clock
Provides power from super cap to Raspberry Pi during power loss, and real-time clock
Solenoid Backpack v1.0
author: Allison-Clift-Jennings
2 layer board of 1.01 x 1.69 inches (25.6 x 42.9 mm)
Uploaded:
March 09, 2014
Shared:
March 24, 2014
Total Price:
$8.50
Solenoid Backpack v1.0
Solenoid Backpack v1.0
universal relay delay
author: LRY
2 layer board of 2.49 x 1.00 inches (63.2 x 25.4 mm)
Uploaded:
March 24, 2014
Shared:
March 24, 2014
Total Price:
$12.40
BC517 variable relay delay controller, fixed or variable delay, instant reset when de-energized.
BC517 variable relay delay controller, fixed or variable delay, instant reset when de-energized.
Raspberry Pi RX-TX level shifter and breakout
author: cheskoblents
2 layer board of 0.45 x 0.50 inches (11.5 x 12.8 mm)
Uploaded:
November 12, 2013
Shared:
March 24, 2014
Total Price:
$1.10
Level shifter for the raspberry pi rx and tx channels. Mosfet based. Translates 3.3v to 5v and vice versa.
Level shifter for the raspberry pi rx and tx channels. Mosfet based. Translates 3.3v to 5v and vice versa.