Shared Projects

Shared Projects

CANBUS HUB V3.0

author: hutchcj
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded: April 15, 2014
Shared: April 18, 2014
Total Price: $3.10

CANBUS HUB V3.0

Just solder on some DB9's and away you go.

Only pins 2 (CAN LO) and 7 (CAN HI) are connected on the DB9's (i.e. no power or ground) and you can use either Male for Female DB9's so you can join a couple in series if you like.

CANBUS HUB V3.0

Just solder on some DB9's and away you go.

Only pins 2 (CAN LO) and 7 (CAN HI) are connected on the DB9's (i.e. no power or ground) and you can use either Male for Female DB9's so you can join a couple in series if you like.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTiny43u Breakout

author: hutchcj
Top
Bottom

2 layer board of 0.73 x 1.02 inches (18.4 x 25.9 mm)
Uploaded: April 18, 2014
Shared: April 18, 2014
Total Price: $3.70

ATTiny43u Breakout

Includes component spaces for Boost Converter (see page 42 of the Data Sheet for more information and components values)

Choose from either SOIC20 or QFN20

Component Sizes: C1 - 0805, C3 - 0805, L1 -1007, D1 - SOD-323

ATTiny43u Breakout

Includes component spaces for Boost Converter (see page 42 of the Data Sheet for more information and components values)

Choose from either SOIC20 or QFN20

Component Sizes: C1 - 0805, C3 - 0805, L1 -1007, D1 - SOD-323

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Spk1

author: eric
Top
Bottom

2 layer board of 1.39 x 1.78 inches (35.3 x 45.3 mm)
Uploaded: April 18, 2014
Shared: April 18, 2014
Total Price: $12.35

Moteino Shield Includes: - Bridge rectifier and cap bank for 24VAC power input. -DC/DC converter -FTDI chip for USB/Serial -3 "Grove" connectors for I2C. - oops, just realized it's missing SDA/SCL pull-ups. I'll have to add those.

Moteino Shield Includes: - Bridge rectifier and cap bank for 24VAC power input. -DC/DC converter -FTDI chip for USB/Serial -3 "Grove" connectors for I2C. - oops, just realized it's missing SDA/SCL pull-ups. I'll have to add those.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Display Controller

author: uChip
Top
Bottom

2 layer board of 1.50 x 1.63 inches (38.1 x 41.3 mm)
Uploaded: April 08, 2014
Shared: April 18, 2014
Total Price: $12.20

I2C to 7-segment, 8-digit LED display

See my project on GitHub for details, latest versions and code.

I2C to 7-segment, 8-digit LED display

See my project on GitHub for details, latest versions and code.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Moteino Data Logger

author: chipmc
Top
Bottom

2 layer board of 2.77 x 1.11 inches (70.3 x 28.2 mm)
Uploaded: April 17, 2014
Shared: April 18, 2014
Total Price: $15.35

Wireless Data Logger Board

Wireless Data Logger Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Trail Traffic Counter v5

author: chipmc
Top
Bottom

2 layer board of 2.11 x 1.61 inches (53.5 x 40.8 mm)
Uploaded: April 18, 2014
Shared: April 18, 2014
Total Price: $16.90

Tested - Works

This is the SMD version of my I2C Data Logger board which I am using for trail traffic counting.

Tested - Works

This is the SMD version of my I2C Data Logger board which I am using for trail traffic counting.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SV650 ECU Decoder v3.0

author: synfinatic
Top
Bottom

2 layer board of 2.14 x 2.06 inches (54.4 x 52.2 mm)
Uploaded: March 25, 2013
Shared: April 17, 2014
Total Price: $21.95

See GitHub For more details. This is the PTH design.

See GitHub For more details. This is the PTH design.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MELD LED board XP

author: tterev3
Top
Bottom

2 layer board of 0.72 x 0.72 inches (18.3 x 18.3 mm)
Uploaded: April 17, 2014
Shared: April 17, 2014
Total Price: $2.60

XP and 4 XQ star for MELD2 driver

XP and 4 XQ star for MELD2 driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MELD LED board v2

author: tterev3
Top
Bottom

2 layer board of 0.72 x 0.72 inches (18.3 x 18.3 mm)
Uploaded: April 17, 2014
Shared: April 17, 2014
Total Price: $2.60

XB-H and 4 XQ-B star for MELD driver

XB-H and 4 XQ-B star for MELD driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UsbAmps [CL1351] beta

author: jmedved
Top
Bottom

2 layer board of 2.13 x 0.91 inches (54.2 x 23.2 mm)
Uploaded: December 16, 2013
Shared: April 17, 2014
Total Price: $9.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MS5803 SPI micro-breakout

Top
Bottom

2 layer board of 0.61 x 0.61 inches (15.5 x 15.5 mm)
Uploaded: April 16, 2014
Shared: April 16, 2014
Total Price: $1.85

Smallest MS5803 pressure sensor breakout I could make,..Solder through vias

Smallest MS5803 pressure sensor breakout I could make,..Solder through vias

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

555 PWM Controller

author: jjveleber
Top
Bottom

2 layer board of 1.41 x 1.71 inches (35.7 x 43.3 mm)
Uploaded: April 16, 2014
Shared: April 16, 2014
Total Price: $11.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tact switch (button) board 12.2mm round v2

author: Helios-
Top
Bottom

2 layer board of 0.48 x 0.48 inches (12.2 x 12.2 mm)
Uploaded: April 16, 2014
Shared: April 16, 2014
Total Price: $1.15

Tact switch (button) board 12.2mm diameter. White silkscreen rings are 10mm and 11mm. Semi-universal pads. Accepts 4-pin 4×4, 5x5, 6×6mm smd switches and 2-pin 3x6mm switches (diagonally). 4-pin switches can be oriented with pins up/down or left/right. Standard 2.54mm header pins surface mount on…

Show full description

Tact switch (button) board 12.2mm diameter. White silkscreen rings are 10mm and 11mm. Semi-universal pads. Accepts 4-pin 4×4, 5x5, 6×6mm smd switches and 2-pin 3x6mm switches (diagonally). 4-pin switches can be oriented with pins up/down or left/right. Standard 2.54mm header pins surface mount on…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreeJalduino

author: Rasyoung
Top
Bottom

2 layer board of 2.79 x 2.31 inches (70.9 x 58.7 mm)
Uploaded: September 10, 2013
Shared: April 16, 2014
Total Price: $32.20

PIC18F2550 Optimized China

PIC18F2550 Optimized China

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

amp

author: Kilohercas
Top
Bottom

2 layer board of 1.17 x 1.72 inches (29.8 x 43.7 mm)
Uploaded: April 16, 2014
Shared: April 16, 2014
Total Price: $10.05

amp

amp

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fitho 2014 v3

author: Suril
Top
Bottom

2 layer board of 2.80 x 1.08 inches (71.1 x 27.3 mm)
Uploaded: April 16, 2014
Shared: April 16, 2014
Total Price: $15.05

Arduino 2009 clone

Arduino 2009 clone

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5V 3A Switching Regulator

author: LAZER-J
Top
Bottom

2 layer board of 1.80 x 1.76 inches (45.7 x 44.6 mm)
Uploaded: April 13, 2014
Shared: April 16, 2014
Total Price: $15.80

5V Switching Regulator based on LM2576S

Digi-key part #'s LM2576SX-5.0/NOPBCT-ND 553-1553-ND PCE3462CT-ND MBR360GOS-ND 493-6186-1-ND 2 x 1276-2876-1-ND

5V Switching Regulator based on LM2576S

Digi-key part #'s LM2576SX-5.0/NOPBCT-ND 553-1553-ND PCE3462CT-ND MBR360GOS-ND 493-6186-1-ND 2 x 1276-2876-1-ND

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Led + DMX

author: RickAT
Top
Bottom

2 layer board of 0.94 x 1.85 inches (23.8 x 47.0 mm)
Uploaded: April 15, 2014
Shared: April 15, 2014
Total Price: $8.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SmartMatrix Shield for Teensy 3.1

author: Pixelmatix
Top
Bottom

2 layer board of 1.91 x 1.45 inches (48.5 x 36.8 mm)
Uploaded: April 15, 2014
Shared: April 15, 2014
Total Price: $13.85

Connect a Large RGB Matrix Display to Teensy 3

Project Documentation Here: SmartMatrix Docs

Connect a Large RGB Matrix Display to Teensy 3

Project Documentation Here: SmartMatrix Docs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nodino-Core2538

author: aisenke
Top
Bottom

2 layer board of 1.10 x 1.00 inches (27.9 x 25.4 mm)
Uploaded: April 15, 2014
Shared: April 15, 2014
Total Price: $5.50

Nodino Robotics Core powered by CC2538 with UPin-27 stacking interface compatible to Microduino. There are 5 additional stackable pins for JTAG debugging. Use Nodino-Cortex-Debug for debugging.

Nodino Robotics Core powered by CC2538 with UPin-27 stacking interface compatible to Microduino. There are 5 additional stackable pins for JTAG debugging. Use Nodino-Cortex-Debug for debugging.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy