Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

6 Channel LED Driver

author: AtticusG3
Top
Bottom

4 layer board of 2.40 x 1.55 inches (61.0 x 39.4 mm)
Uploaded: August 03, 2014
Shared: August 03, 2014
Total Price: $37.20

> # Alpha prototype stage. #

>This board uses an onboard Atmega328p to drive 6 N-Channel Mosfets with it's PWM pins.

>D2, D4, A0 and A1 are broken out along with GND 5v and Vin to a 2x5 header designed to run an external switch panel.

>ISCP pins are also broken out to allow in-situ progr…

Show full description

> # Alpha prototype stage. #

>This board uses an onboard Atmega328p to drive 6 N-Channel Mosfets with it's PWM pins.

>D2, D4, A0 and A1 are broken out along with GND 5v and Vin to a 2x5 header designed to run an external switch panel.

>ISCP pins are also broken out to allow in-situ progr…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

msop-dip

author: voltergeist
Top
Bottom

2 layer board of 0.41 x 0.58 inches (10.3 x 14.6 mm)
Uploaded: May 13, 2014
Shared: August 02, 2014
Total Price: $1.15

msop10

msop10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

50pin IDC to Breadboard adapter

author: stefanberndtsson
Top
Bottom

2 layer board of 4.85 x 0.78 inches (123.1 x 19.8 mm)
Uploaded: August 02, 2014
Shared: August 02, 2014
Total Price: $18.85

Adapter for connecting a 50pin IDC connector to a breadboard with offset so that the breadboard isn't covered by the ribbon cable

Adapter for connecting a 50pin IDC connector to a breadboard with offset so that the breadboard isn't covered by the ribbon cable

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Audioleveler by W2AEW (C4, new value)

author: LRY
Top
Bottom

2 layer board of 0.79 x 1.85 inches (20.0 x 47.0 mm)
Uploaded: August 02, 2014
Shared: August 02, 2014
Total Price: $7.25

Audio limiter/leveler by W2AEW, checkout his YouTubechannel for more: https://www.youtube.com/channel/UCiqd3GLTluk2s_IBt7p_LjA

Audio limiter/leveler by W2AEW, checkout his YouTubechannel for more: https://www.youtube.com/channel/UCiqd3GLTluk2s_IBt7p_LjA

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rotary Switch 12/16 BOB

author: selmo
Top
Bottom

2 layer board of 1.84 x 1.20 inches (46.7 x 30.5 mm)
Uploaded: August 02, 2014
Shared: August 02, 2014
Total Price: $11.00

Small rotary switches BOB / proto

Small rotary switches BOB / proto

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Firenze

author: PigeonFX
Top
Bottom

2 layer board of 1.59 x 1.64 inches (40.3 x 41.7 mm)
Uploaded: July 28, 2014
Shared: August 02, 2014
Total Price: $13.00

Buffer (Klon)

Buffer (Klon)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LSM9DS0+MS5611Teensy3.1Add-On.v01

Top
Bottom

2 layer board of 0.71 x 0.51 inches (17.9 x 13.0 mm)
Uploaded: August 02, 2014
Shared: August 02, 2014
Total Price: $1.80

LSM9DS0 9-axis motion sensor plus MS5611 pressure sensor/altimeter add-on board for Teensy 3.1 hardwired for I2C

LSM9DS0 9-axis motion sensor plus MS5611 pressure sensor/altimeter add-on board for Teensy 3.1 hardwired for I2C

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreHD Eagle Version

author: fbelavenuto
Top
Bottom

2 layer board of 3.80 x 3.20 inches (96.6 x 81.2 mm)
Uploaded: August 01, 2014
Shared: August 01, 2014
Total Price: $60.75

FreHD Eagle Version. Documentation: https://drive.google.com/file/d/0B5wpc_jDN_n0Z1A0TmtIcGhyM1E/edit?usp=sharing https://github.com/fbelavenuto/frehd-br

FreHD Eagle Version. Documentation: https://drive.google.com/file/d/0B5wpc_jDN_n0Z1A0TmtIcGhyM1E/edit?usp=sharing https://github.com/fbelavenuto/frehd-br

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wulf FCC Breakout V1.0

author: BYRNEDAWG
Top
Bottom

2 layer board of 5.40 x 0.50 inches (137.2 x 12.6 mm)
Uploaded: August 01, 2014
Shared: August 01, 2014
Total Price: $13.40

FCC Cable Board

FCC Cable Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Twitchity Quad PDB V0.4

author: jhitesma
Top
Bottom

2 layer board of 2.90 x 2.90 inches (73.5 x 73.5 mm)
Uploaded: August 01, 2014
Shared: August 01, 2014
Total Price: $41.90

Power and LED's only.

Power and LED's only.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX31850K Breakout v1.0

author: nslogan
Top
Bottom

2 layer board of 0.85 x 0.85 inches (21.6 x 21.6 mm)
Uploaded: August 01, 2014
Shared: August 01, 2014
Total Price: $3.60

A small breakout board for the Maxim MAX31850K 1-wire type-K thermocouple amplifier with CJC. Project available on GitHub.

A small breakout board for the Maxim MAX31850K 1-wire type-K thermocouple amplifier with CJC. Project available on GitHub.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Twitchity Quad PDB V0.3

author: jhitesma
Top
Bottom

2 layer board of 2.90 x 2.90 inches (73.5 x 73.5 mm)
Uploaded: August 01, 2014
Shared: August 01, 2014
Total Price: $41.90

Quite possibly ready for use

Quite possibly ready for use

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tinyISPShield

author: cthree87
Top
Bottom

2 layer board of 2.20 x 2.10 inches (55.9 x 53.4 mm)
Uploaded: July 30, 2014
Shared: August 01, 2014
Total Price: $23.10

An Arduino UNO R3 Shield for programming ATtiny44/45/84/85 MCUs with Arduino sketches. My Github repository has details.

An Arduino UNO R3 Shield for programming ATtiny44/45/84/85 MCUs with Arduino sketches. My Github repository has details.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SB-154 wadeMachine

author: StudioBElec
Top
Bottom

2 layer board of 3.00 x 2.68 inches (76.2 x 68.0 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $40.10

8-bit modulator + distortion

8-bit modulator + distortion

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FFB-FFP-USB-adapter

author: redyrxela
Top
Bottom

2 layer board of 1.01 x 1.47 inches (25.7 x 37.3 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $7.40

usb adapter for the sidewinder force feedback pro.

based on <https://code.google.com/p/adapt-ffb-joy/>

this version saves space by mounting the db15 to the bottom of the board components that should work:

  • RPC2010JT220RCT-ND 220 Ohm resistor
  • P2.2KWCT-ND 2.2k ohm resistor x2
  • 709-1…

Show full description

usb adapter for the sidewinder force feedback pro.

based on <https://code.google.com/p/adapt-ffb-joy/>

this version saves space by mounting the db15 to the bottom of the board components that should work:

  • RPC2010JT220RCT-ND 220 Ohm resistor
  • P2.2KWCT-ND 2.2k ohm resistor x2
  • 709-1…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Garage Door Sensor Board

author: EmptyJay
Top
Bottom

2 layer board of 0.37 x 0.97 inches (9.3 x 24.6 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $1.75

Garage Door Monitoring Hall Effect Sensor Board

Garage Door Monitoring Hall Effect Sensor Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 4 - 62256 RAM

author: semachthemonkey
Top
Bottom

2 layer board of 3.44 x 0.92 inches (87.4 x 23.3 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.75

Note silkscreen says ROM. Should say RAM. My Bad!

Note silkscreen says ROM. Should say RAM. My Bad!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 6 - Serial IO

author: semachthemonkey
Top
Bottom

2 layer board of 3.69 x 0.87 inches (93.6 x 22.0 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.95

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, MC68B50, MAX232, 1uf caps, 2k2 resistors for FTDI

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, MC68B50, MAX232, 1uf caps, 2k2 resistors for FTDI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 5 - Clock & Reset

author: semachthemonkey
Top
Bottom

2 layer board of 0.82 x 1.04 inches (20.7 x 26.4 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $4.20

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, 7.3728Mhz xtal, 22pf caps, R1=2.2K, R2=1M, R3=1k

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, 7.3728Mhz xtal, 22pf caps, R1=2.2K, R2=1M, R3=1k

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 3 - 27C512 ROM

author: semachthemonkey
Top
Bottom

2 layer board of 3.44 x 0.89 inches (87.4 x 22.6 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.30

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C512 split in to 8 8k pages selectable by jumpers. 74LS32 for address decoding

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C512 split in to 8 8k pages selectable by jumpers. 74LS32 for address decoding

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy