Shared Projects

Tiny chainable IMUs with an LED - Source Files

Mav2Telem 0r2 / LED / CAN PCB
support board for use with AutoQuad 6 Flight Controller or for stand-alone use.
Features:
- 5V/3A DC/DC, Vin = 42V max.
- 12V/1A DC/DC, Vin = 42V max.
- 3.3V/0.5A DC/DC
- up to 8 powered CAN slots, 4 on TOP and 4 on BOT each (needs to be mounted sequentially when you intend to use more than 4 slots)
- 4 IntelliLED WS2812B ports
- MavLink input (from AQ6)
- Spektrum X-Bus interface for connecting to TM1000 and/or other sensors
- HOTT telemetry output
- Current sensor input (for use with breakout board designed by joebar; refer to http://oshpark.com/shared_projects/NL4NSScO for details)
- Arduino ProMicro socket for ‚Mav2Telem‘ (AVR ISP interface provided in case the boot loader needs to be swapped/updated)

For details on the ‚Mav2Telem‘ Software refer to http://forum.autoquad.org/viewtopic.php?f=33&t=3069 and http://forum.autoquad.org/viewtopic.php?f=33&t=2850.

BOM and Schematic were available here: http://forum.autoquad.org/viewtopic.php?f=38&t=2920&start=80#p21050

Released under creative commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
You are free to:
Share: copy and redistribute the material in any medium or format The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:
Attribution: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

NonCommercial: You may not use the material for commercial purposes.

NoDerivatives: If you remix, transform, or build upon the material, you may not distribute the modified material.

No additional restrictions: You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices: You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

THIS PROJECT IS PROVIDED “AS IS” AND WITH ALL FAULTS. NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS PCB. THE AUTHOR SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

3 QRE1133 IR sensors with output on a 5-pin header. The mounting holes are designed to fit the spacing on Actobotics components (0.385" between holes or 0.77" between the two outside holes).

sensor

Constant Current LED Driver (750mA)

http://www.github.com/planecrazy29/temperature

A simple chainable widget for the WS2812B

BLF17-L-Z

8x7135 Linear LED Driver. Zener Modified.

D1: 4.3V Zener SOD-323
C1: 0.1uF 0603
R1: 100ohm 0603
R2: VDIV1 0603
R3: VDIV2 0603
U1: Attiny 20SSU

Zener modified BLF17DD

17mm, 5mm contact pad

D1: 4.3V Zener SOD-323
R1: 200ohm 0805
R2: VDIV1 0805
R3: VDIV2 0805
R4: 100ohm 0805
R5: 10k 0805
C1: 0.1uF 0805
FET: 70N02
U1: ATTINY 20SSU

Control and Sensors - 2014-01-04

Raspberry Pi RepRap Controller

Mini breakout board for ATmega1284P

with EPCOS Filter for 1090 MHz ADS-B.

PIC24 compact devbrd r0.2

PIC32 DIP

Controls Spark Igniter - 2014-01-04

An arduino shield, Prototype I/Os PCB, for schematic and part list follow Electropepper

Source and information