Shared Projects

Shared Projects

KN4DLY_JouleTheif_ML_v2.0

author: Gangem
Top
Bottom

2 layer board of 2.20 x 0.65 inches (55.8 x 16.5 mm)
Uploaded: December 06, 2022
Shared: December 06, 2022
Total Price: $7.10

v2.0 Of The JouleTheif Mini Lamp for N4CN & the N4GCS school radio club. Designed by KN4DLY

v2.0 Of The JouleTheif Mini Lamp for N4CN & the N4GCS school radio club. Designed by KN4DLY

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PST_Breakout.kicad_pcb

author: dan.jones
Top
Bottom

2 layer board of 0.83 x 0.92 inches (21.1 x 23.4 mm)
Uploaded: December 05, 2022
Shared: December 06, 2022
Total Price: $3.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEC_Fixture.kicad_pcb

author: dan.jones
Top
Bottom

2 layer board of 0.40 x 0.65 inches (10.2 x 16.5 mm)
Uploaded: December 05, 2022
Shared: December 06, 2022
Total Price: $1.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card Deck

author: MakersBox
Top
Bottom

2 layer board of 4.21 x 3.76 inches (107.0 x 95.6 mm)
Uploaded: December 06, 2022
Shared: December 06, 2022
Total Price: $79.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MusselGapeTracker_RevF.kicad_pcb

author: millerlp
Top
Bottom

2 layer board of 3.98 x 2.27 inches (101.0 x 57.8 mm)
Uploaded: December 05, 2022
Shared: December 05, 2022
Total Price: $45.20

Mussel Gape Tracker Revision F. This version allows the use of two different versions of the DS3231 real time clock, either a 16-SOIC or 8-SOIC footprint. This version is still software compatible with earlier revisions.

Mussel Gape Tracker Revision F. This version allows the use of two different versions of the DS3231 real time clock, either a 16-SOIC or 8-SOIC footprint. This version is still software compatible with earlier revisions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hall effect sensor board A139x

author: millerlp
Top
Bottom

2 layer board of 0.25 x 0.41 inches (6.4 x 10.4 mm)
Uploaded: May 31, 2022
Shared: December 05, 2022
Total Price: $0.50

Single board for mounting Allegro A1395, A1393, A1391 Hall effect sensors. Requires one 10k ohm resistor (0603 size) and one 0.1 uF capacitor (0603 size). 'SLP' is the sleep line, 'VOUT' is the output signal.

Single board for mounting Allegro A1395, A1393, A1391 Hall effect sensors. Requires one 10k ohm resistor (0603 size) and one 0.1 uF capacitor (0603 size). 'SLP' is the sleep line, 'VOUT' is the output signal.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rapid Prototyping Board V1.0

author: MakersBox
Top
Bottom

2 layer board of 2.55 x 2.00 inches (64.8 x 50.8 mm)
Uploaded: December 05, 2022
Shared: December 05, 2022
Total Price: $25.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card - ArduinoISP

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: December 05, 2022
Shared: December 05, 2022
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MGB-LED-101

author: leggomyfroggo
Top
Bottom

2 layer board of 0.58 x 0.64 inches (14.8 x 16.3 mm)
Uploaded: October 02, 2022
Shared: December 04, 2022
Total Price: $1.85

Dual stage battery indicator for the Game Boy Pocket. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm diameter fiber optic tubing as a light pipe.

Assemble according to BOM:

| Reference | Description | Footprint | Part # | Notes | | ——— | ———-…

Show full description

Dual stage battery indicator for the Game Boy Pocket. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm diameter fiber optic tubing as a light pipe.

Assemble according to BOM:

| Reference | Description | Footprint | Part # | Notes | | ——— | ———-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MGB-TAC-101

author: leggomyfroggo
Top
Bottom

2 layer board of 2.74 x 1.65 inches (69.5 x 42.0 mm)
Uploaded: December 04, 2022
Shared: December 04, 2022
Total Price: $22.60

Single board tactile button mod for the Game Boy Pocket. MUST ORDER IN FLEX.

Assemble according to the BOM:

Reference Description Footprint Part #
D1 Quad diode array, common cathode SOT-23-5 FMN1T148
D2 Dual diode array, co…

Show full description

Single board tactile button mod for the Game Boy Pocket. MUST ORDER IN FLEX.

Assemble according to the BOM:

Reference Description Footprint Part #
D1 Quad diode array, common cathode SOT-23-5 FMN1T148
D2 Dual diode array, co…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Game Boy Pocket/Color Replacement Power Board

author: mousebitelabs
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.0 x 20.1 mm)
Uploaded: December 04, 2022
Shared: December 04, 2022
Total Price: $3.10

Replacement power board for CGB/MGB/MGBC. Untested! 5V only, so it does not support original LCD displays.

All discrete parts (other than L1) are size 0603. Caps should be X5R/16V or better.

C1, C3, C4 = 10uF C2, C6 (?) = 1uF C5 = 10uF (if needed)

R1 = 1k (?) R2 = 1M (for TPS61200), 0 (for TPS…

Show full description

Replacement power board for CGB/MGB/MGBC. Untested! 5V only, so it does not support original LCD displays.

All discrete parts (other than L1) are size 0603. Caps should be X5R/16V or better.

C1, C3, C4 = 10uF C2, C6 (?) = 1uF C5 = 10uF (if needed)

R1 = 1k (?) R2 = 1M (for TPS61200), 0 (for TPS…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EiceDRIVER Half Bridge Board

author: Dog-One
Top
Bottom

2 layer board of 2.00 x 1.91 inches (50.8 x 48.6 mm)
Uploaded: December 04, 2022
Shared: December 04, 2022
Total Price: $19.10

Infineon 2EDS8265HXUMA2 Half Bridge Driver Board Has two onboard MOSFETs that lay on the backside upside down so they can be easily heat sinked. Solder mask areas removed for trace tinning.

Infineon 2EDS8265HXUMA2 Half Bridge Driver Board Has two onboard MOSFETs that lay on the backside upside down so they can be easily heat sinked. Solder mask areas removed for trace tinning.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card - 2.54mm Pitch

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: December 04, 2022
Shared: December 04, 2022
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hantek 6022 AC/DC mod

author: pzw
Top
Bottom

2 layer board of 1.35 x 0.74 inches (34.3 x 18.8 mm)
Uploaded: December 03, 2022
Shared: December 03, 2022
Total Price: $4.95

The design is based on the diagram at the github repo. Instead of mounting all the components with glue at the bottom of the main PCB, this additional PCB is mounted using a mounting hole available at th…

Show full description

The design is based on the diagram at the github repo. Instead of mounting all the components with glue at the bottom of the main PCB, this additional PCB is mounted using a mounting hole available at th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

N64 Memory Pak 256KB FRAM

author: frosters
Top
Bottom

2 layer board of 1.65 x 1.34 inches (41.9 x 33.9 mm)
Uploaded: December 03, 2022
Shared: December 03, 2022
Total Price: $11.00

This is a drop in replacement FRAM based memory card for the N64. It will fit in OEM Controller Pak housings or aftermarket housings with the same footprint.

PCB Thickness: 1.2mm

This is a drop in replacement FRAM based memory card for the N64. It will fit in OEM Controller Pak housings or aftermarket housings with the same footprint.

PCB Thickness: 1.2mm

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPS63802 Test Board

author: mousebitelabs
Top
Bottom

2 layer board of 0.78 x 1.04 inches (19.9 x 26.4 mm)
Uploaded: December 03, 2022
Shared: December 03, 2022
Total Price: $4.05

A simple test board for three voltage supplies, using the TPS63802 buck-boost converter. Ideally something like a 5V, 3.3V, and 2.5V supplies from one input.

A simple test board for three voltage supplies, using the TPS63802 buck-boost converter. Ideally something like a 5V, 3.3V, and 2.5V supplies from one input.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

project-stemmaqt-ISM330DHCX.kicad_pcb

author: francoisgervais
Top
Bottom

4 layer board of 1.00 x 0.70 inches (25.4 x 17.8 mm)
Uploaded: September 24, 2022
Shared: December 03, 2022
Total Price: $7.00

v1.0.0

v1.0.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MCU_Shield_RP2040_R4_2022-12-01

author: gnare
Top
Bottom

2 layer board of 3.10 x 2.50 inches (78.8 x 63.6 mm)
Uploaded: December 02, 2022
Shared: December 02, 2022
Total Price: $38.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SE1111-1 PIC ADAPTER 2022A

author: smith_se
Top
Bottom

2 layer board of 0.39 x 0.84 inches (9.9 x 21.3 mm)
Uploaded: September 15, 2022
Shared: December 02, 2022
Total Price: $1.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Twin Famicom Expansion Switcher Switch Board

author: TheJeffChen
Top
Bottom

2 layer board of 0.50 x 1.16 inches (12.6 x 29.4 mm)
Uploaded: November 05, 2022
Shared: December 01, 2022
Total Price: $2.85

Twin Famicom Expansion Switcher Switch Board

Twin Famicom Expansion Switcher Switch Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy